Brand Name or Equal Zeiss Celldiscoverer 7 LCI Automated Microscope for Live Cell Imaging
COMBINED SYNOPSIS / SOLICITATION
Title: Brand Name or Equal Zeiss Celldiscoverer 7 LCI Automated Microscope for Live Cell Imaging
(i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.
(ii) The solicitation number is 75N95019Q00352 and the solicitation is issued as a request for quotation (RFQ).
This acquisition is for a commercial item or service and is conducted under the authority of the Federal Acquisition Regulation (FAR) Part 13-Simplified Acquisition Procedures; FAR Subpart 13.5-Simplified Procedures for Certain Commercial Items; and FAR Part 12-Acquisition of Commercial Items, and is not expected to exceed the simplified acquisition threshold.
(iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2019-06, dated September 10, 2019.
(iv) The associated NAICS code 334516 and the small business size standard 1,000 employees. This requirement is full and open with no set-aside restrictions.
(v) The National Institute on Aging (NIA) Laboratory of Clinical Investigation requires the purchase of an automated microscope for live cell imaging.
(vi) Generic Name of Product: Automated platform for live cell imaging with the following salient characteristics:
Brand Name of Product: Zeiss Celldiscoverer 7 LCI
Cell Discoverer 7 KMAT (Product ID 494919-9880-010) QTY 1 PC
Consisting of quantity 1 each of the following items:
430039-9221-000
System unit Celldiscoverer 7 LCI
Celldiscoverer 7 LCI system unit
Automated, inverted microscope with integrated darkroom
for observation of life and fixed samples.
The system unit includes:
- automatic sample container recognition
- automatic bottom thickness measurement
- automatic barcode reader
- automatic sample focusing, hardware-based
- active focus stabilization, hardware-based
- apochromatic incident-light beampath with adaptive field stop
- Incubation set heating/cooling S1
- Reflected-light illuminator FL for up to 7 LEDs
(385 / 420 / 470 / 520 / 567 / 590 / 625 nm)
- Filter wheel for beam splitting, 5x
- Emission filter wheel 7x
- Transmitted-light illuminator with IR-LED
- Transmitted-light contrast module for phase-gradient contrast
- Scanning stage 300x140
- Calibration set including:
1x Insert plate for 3 calibration slides
3 calibration slides,
1x calibration microwell plate
- external camera port with interface 60N
for the connection of a camera
- pipetting access
- UV-disinfection unit
- afocal magnification changer 0.5x / 1x / 2x
Provides a magnification range of 2,5x - 100x depending on
objective configuration
- Objective Plan-Apochromat 5x/0.35
- power supply 100 - 240 V / 50 - 60 Hz / max. 6 A
- dimensions (H x W x D): approx. 700 mm x 710 mm x 640 mm
430039-9020-000
Objective PApo 20x/0.7 autocorr
Objective Plan-Apochromat 20x/0.7 autocorr
for Celldiscoverer 7
Automated correction mechanism for
cover glass/cycloolefin bottom thickness 0.13 - 0.21 mm
and polystyrol bottom thickness 0.15 - 1.2 mm.
Automated objective heating.
The objective contains an ACR chip and temperature sensors.
FWD=2.2mm, independent of magnification
Offers in combination with afocal magnification changer
the following specifications:
- 10x / 0.35
- 20x / 0.7
- 40x / 0.7
Parfocal length 75 mm.
Flange connection for fixed objective orientation.
430039-9030-000
Objective PApo 20x/0.95 autocorr
Objective Plan-Apochromat 20x/0.95 autocorr
for Celldiscoverer 7
Automated correction mechanism for
cover glass/cycloolefin bottom thickness 0.13 - 0.21 mm
and polystyrol bottom thickness 0.15 - 0,21 mm.
Automated objective heating.
The objective contains an ACR chip and a temperature sensor.
FWD=0.76mm, independent of magnification
Offers in combination with afocal magnification changer
the following specifications:
- 10x / 0.5
- 20x / 0.8
- 40x / 0.95
Parfocal length 75 mm.
Flange connection for fixed objective orientation.
430039-9050-000
Objective PApo 50x/1,2W w. Autoimmersion
Objective Plan-Apochromat 50x/1.2 W autocorr with autoimmersion
for Celldiscoverer 7
Automated correction mechanism for
cover glass/cycloolefin bottom thickness 0.13 - 0.21 mm
and polystyrol bottom thickness 0.15 - 0,21 mm.
Automated water immersion and automated objective heating.
The objective contains an ACR chip and temperature sensors.
FWD=0.84mm, independent of magnification
Offers in combination with afocal magnification changer
the following specifications:
- 25x / 1.2 W
- 50x / 1.2 W
- 100x / 1.2 W
Parfocal length 75 mm.
Flange connection for fixed objective orientation.
423057-9001-000
LED-package 01
LED Set 01 for excitation wavelengths 385, 470, 567, 625 nm
423057-9010-000
LED-package 02
LED Set 02 for excitation wavelengths 420, 520, 590 nm
423056-9010-000
Illumination system Colibri.2 expansion
LED Illumination unit FL, extension for Celldiscoverer 7
Continuously adjustable, fast switchable and long-term stable
fluorescence light source, for use with LED Set 02
489090-9030-000
Filter set 90 HE
Filter Set 90 HE for Celldiscoverer 7 (E)
quadruple filter set for the excitation wavelenghts
385nm, 470nm, 555nm and 625nm,
consisting of:
RQBS 405+493+575+653
EM QBP 425/30+514/30+592/25+709/100
489091-9030-000
Filter Set 91 HE
Filter Set 91 HE for Celldiscoverer 7 (E)
triple filter set for the excitation wavelenghts 420nm, 520nm and 590nm,
consisting of:
RTBS 450+538+610
EM TBP 467/24+555/25+687/145
489092-9030-000
Filter Set 92 HE
Filter Set 92 HE for Celldiscoverer 7 (E)
triple filter set for the excitation wavelenghts 385nm, 470nm and 590nm,
consisting of:
RTBS 405+493+610
EM TBP 425/30+524/50+688/145
432332-9030-000
Insert plate f. 6x petri dishes 35mm
Insert plate for 6 Petri dishes 35
- for six Petri dishes "35" (dia. 34...36 mm)
- for insertion in mounting frame; Celldiscoverer 7
432332-9040-000
Insert plate f. petri dishes 35 a. 60mm
Insert plate for 1 Petri dish 35/60
- for one Petri dish "35" (dia. 30...38 mm) or
"60" (dia. 50...60 mm)
- for insertion in mounting frame; Celldiscoverer 7
432332-9050-000
Insert plate 2x for slides 76mm x 26mm
Insert plate for 2 slides 76x26 mm
for insertion in mounting frame; Celldiscoverer 7
432332-9070-000
Insert plate 2x for slides 57mm x 26mm
Insert plate for 2 slides/Lab-TekTM chambers 57x26 mm
for insertion in mounting frame; Celldiscoverer 7
411860-9100-000
TempModule S1, Celldiscoverer 7
TempModule S1 for Celldiscoverer 7 (D)
- basic stack module for temperature control of sample chamber
- power supply for further S1 modules
- resolution: 0.1° C
- temperature accuracy: +/- 0.1°C
- temperature measuring channel for external calibration
- CAN connecting cable
- 90V - 260VAC / 50 - 60Hz / max. 460VA
411857-9130-000
CO2 Module S1, Celldiscoverer 7
CO2 Module S1 for Celldiscoverer 7 (D)
- stack module for CO2 control
- power supply and control through TempModule S1
- CO2 concentration adjustable between 1 and 8%
- precision +/- 0.1%
430039-9100-000
Extension Housing; Celldiscoverer 7
Extension housing for Celldiscoverer 7 system unit
- integration of TempModule S1, CO2 Module S1,
O2 Module S1 for Celldiscoverer 7
- integration of components at external camera port
- dimensions (H x W x D): approx. 700 mm x 560 mm x 640 mm
426557-0000-000
Camera Axiocam 506 mono
426513-9013-000
Camera Set Orca Flash 4.0 V3
Kamera-Set Orca Flash 4.0 V3 für Axio Scan.Z1 / Celldiscoverer 7 (D)
High-End monochrome with digital interface
Camera Link frame grabber PCIe x8 and trigger cable set
for Axio Scan included
Number of Pixels: 2048 (H) x 2048 (V) = 4 Mega pixel
Pixel size: 6.5 μm x 6.5 μm
Chip size: 13.31 mm x 13.31 mm equivalent to 1"
Spectral range: app. 350 to 1000 nm
Max. Full Well Capacity: Approx. 30.000 e
Live frame rates (depending on hardware and software configuration):
H x V Binning Factor Frame Rate@20ms
2048 x 2048 1 100
Digitization: 16 Bit
Dynamic Range: Typical 33000 : 1 at 1.3 e readout noise
Dark current: ca. 0.5 e/p/s
Integration Time: 10 μs to 10 s
Cooling: Air cooling at -10°C
Size / Weight: App. 13 cm x 8.5 cm x 8.5 cm / 2 Kg
426114-0000-000
C-Mount Adapter 60N C 1" 1.0x
410135-1024-300
ZEN 3.0 celldiscoverer
Image acquisition and processing under Win 10 x64.
User interface configurable, control of the Celldiscoverer 7
and components, extensive acquisition and analysis.
CZI image format.
The following modules are included:
- ZEN Module Tiles & Positions
- ZEN Module Autofocus
- ZEN Module Fast Acquistion
- ZEN Module Experiment Designer
- ZEN Module Image Analysis
- ZEN Module Advanced Processing
- ZEN Module Measurement
- ZEN Module Multi Channel
- ZEN Module Z-Stack
- ZEN Module Time Lapse
- ZEN Module Extended Focus
- ZEN Module Dual Camera
- ZEN Module Movie Recorder
- ZEN Module Connect Entry
LSM only:
- ZEN Module Colocalisation
- ZEN Module Dynamics
LSM Airyscan only:
- ZEN Module Airyscan 2 Multiplex Basic
000000-1066-465
Dongle / hardware license USB for ZEN
410136-1021-230
ZEN Module Deconvolution
ZEN Module Deconvolution Hardware License Key
Module for improvement of 3D image stacks with
3D deconvolution algorithms, methods for theoretical PSF.
Significant performance gain when used with suitable Nvidia GPU.
410136-1068-210
ZEN Module 3Dxl
ZEN Module 3Dxl Hardware License Key (O)
Module for visualization and analysis of 3D or 4D image data. 3Dxl
features the rendering of ray-tracing-based volume models
(transparency), surface renderings and maximum intensity projection
renderings. Time series (4D)/movies, the generation and export of
movies as well as tools for interactive 3D measurements are included.
3Dxl is powered by technology from arivis AG (www.arivis.com) and is
thus optimized to handle data sets that are larger than Graphics memory.
410136-1002-120
ZEN Module Macro Environment
Integrated Development Environment (IDE) with editor, debugger and
recorder.
Enables intermediate Users to customize and automate ZEN for
their needs with a selected set of commands.
The Macro Interface in combination with the Python language allows
users to generate simple Macro Code as well as Macros with loops
and branches. Experts can extend the functionality by including
additional libraries.
410136-1045-110
ZEN SW Driver Hamamatsu Cam.
410203-9911-000
Workstation Premium ZEISS 60 A (hp Z6)
Microscopy Workstation Premium Intel Xeon multilingual (O)
- HP Z6 G4 Workstation
- Chipset: Intel C622
- Memory: max. 192 GB RAM
- Memory Expansion Slots: 6 x DDR4, RDIMM, ECC, 2666 MHz Module
- PCI Express Connectors:
2 x PCI Express Generation 3 x16
1 x PCI Express Generation 3 x8
3 x PCI Express Generation 3 x4
- SSD: 1 x 512 GB M.2 NVMe
- Hard Drives: 2 x 4 TB SATA 7200 rpm (configured as 4 TB RAID 1 hard drive)
- Optical Storage: DVD +/- RW recorder for rewriteable media
- Drive Bays: 4
- I/O Controller: SATA 6.0 GB/s controller integrated with 6 ports
- Network Controller: Dual integrated GbE LAN interface
- I/O: 10 x USB 3.0 type A (4 x front, 6 x rear),
PS/2 for keyboard and mouse
- Certifications & Declarations: CE, CSA, UL, FCC, CCC, KCC
- Power Supply: 100 - 127 V / 200 - 240 V / 50 - 60 Hz / 1000 W
with country specific plug
- Chassis Dimensions: (H x W x D): 445 x 169 x 465 mm
- Rescue kit
000000-2307-671
System configuration 5 image /OS ELYRA7
System configuration 5 image and OS for HP Z6 with ELYRA 7(O)
Installation of Windows 10 IoT Enterprise 2016 LTSB Embedded x64
Highend
Master Image
incl. Windows 10 license,
ZEN blue & ZEN black (ELYRA 7)
System configuration 5 (hp Z6 ELYRA 7)
410330-0400-000
Processor Intel Xeon Gold 5122 (hp Z6)
Processor Intel Xeon Gold 5122 (hp Z6) (O)
Default processor configuration
- Intel Xeon Gold 5122 (3.6 GHz, 16.5 MB cache, 4 cores)
410303-3204-000
Memory 32 GB (1x32) DDR4-2666 (hp Z6)
Memory 32 GB (1x32) DDR4-2666 MHz ECC registered RAM (O)
consisting of aus 1 x 32 GB modules
- only for 410203-9911-000 Workstation Premium ZEISS 60 A (hp Z6)
- can be extended to 64 GB (2 x 410303-3204-000), 128 GB (4 x
410303-3204-000) or 192 GB (6 x 410303-3204-000)
410331-1900-000
Graphic Card NVIDIA Quadro P6000 24GB
Graphics Card NVIDIA Quadro P6000 24GB DP (O)
Professional graphics card for Workstation Premium
- 24 GB GDDR5X memory
- PCI Express® 3.0 Interface x16
- Hardware acceleration of DirectX® 12, OpenGL® 4.5 and CUDA
- Support for up to four displays
- Display outputs: 4 x DisplayPort 1.4 (DP)
- DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)
430039-9021-000
PC-Interface Microscop Var.1 + Trigger
PC Interface Microscope and Trigger for Celldiscoverer 7 (D)
Trigger board for TTL trigger output and analysis.
with precise trigger control of Celldiscoverer 7, LSM and
up to two triggerable cameras.
410361-1000-000
Adapter USB-4x RS232 EX-1334V
410324-0008-000
Hard drive extension 8TB RAID10 (hp Z6)
Hard Drive Extension 8TB RAID10 (hp Z6) (O)
- Extension of default RAID system
- Increase capacity from 4 TB (RAID 1) to 8 TB (RAID 10)
- Speed up write and read transfer rates
- Recommended for applications generating large amount of data and / or
high data transfer rates, e.g. processing of large datasets or driving
detector systems at full bandwidth.
410358-0503-000
Network adapter 2x10 GbE RJ45 (hp Z6)
Network Adapter 2x10 GbE RJ45 (hp Z6) (O)
Additional network adapter 2x10 GbE RJ45 (hp Z6)
e.g. for connection of storage systems
410380-0200-000
Language pack English US
Language Pack English US (O)
- Keyboard with English (US) layout
410350-3201-000
Monitor TFT 32" HP Z32
Monitor TFT 32" HP Z32 (O)
Visible diagonal: 80 cm, 16:9
Max. resolution: 3840 x 2160 pixel @ 60 Hz
Brightness: 350 cd/m2
Contrast: 1300:1
Viewing angle: horizontal 178 degree, vertical 178 degree
3 x Video input: DisplayPort 1.2, mini DisplayPort 1.2, HDMI 2.0
3 x USB 3.0, 1 x USB 3.1 Type-C
Power consumption: Maximum 185 W, Typical 70 W, Power Saving 0.5
W
Dimensions with stand
(H x W x D): 56.44 cm x 71.45 cm x 24.8 cm
Weight: 12.2 kg (incl. stand)
Ergonomic features: Tilt: -5°to +20°, swivel:90°, height adjustable 12
cm
Certification and compliance: CE, CSA, GS, TÜV, FCC, TCO
Operating voltage: 100-240 V, country-specific power cable
000000-2147-376
System table, mid size, air damped, level
System table, mid size, air damped, level regulated
pressured air supply necessary, long side open with breadboard,
1200x900mm
Quotation should include any applicable training, installation, and shipping costs.
(vii) Delivery Date: Approximately 60 to 120 days After Receipt of Order
Delivery Address: 251 Bayview Blvd, Baltimore, MD 21224
(viii) The provision at FAR clause 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition.
(ix) The provision at FAR clause 52.212-2, Evaluation - Commercial Items, applies to this acquisition.
(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement; (ii) price; (iii) past performance (including examples of successful orders and installation).
Technical and past performance, when combined, are (1) significantly more important than cost or price.
(b) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.
(x) The Offerors to include a completed copy of the provision at FAR clause 52.212-3, Offeror Representations and Certifications-Commercial Items, with its offer.
(xi) The FAR clause at 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition.
(xii) FAR clause at 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items, applies to this acquisition.
(xiii) The Defense Priorities and Allocations System (DPAS) are not applicable to this requirement.
(xiv) Responses to this solicitation must include sufficient information to establish the interested parties' bona-fide capabilities of providing the product or service. The price quote shall include: unit price, list price, shipping and handling costs, delivery days after contract award, delivery terms, prompt payment discount terms, F.O.B. Point (Destination or Origin), product or catalog number(s); product description; and any other information or factors that may be considered in the award decision. Such factors may include: past performance; special features required for effective program performance; trade-in considerations; probable life of the item selected as compared with that of a comparable item; warranty considerations; maintenance availability; and environmental and energy efficiency considerations.
Respondents proposing on an equal product of the brand-name product specified in this announcement must provide, as part of their response: (a) product, catalog, model, and/or part number(s); (b) product description; (c) all relevant information and documentation that the item(s) offered meets the salient physical, functional, or performance characteristics as specified in the purchase description; quantity; estimated price or cost; shipping, handling, and/or installation charges; and delivery date after receipt of order.
In addition, the Dun & Bradstreet Number (DUNS), the Taxpayer Identification Number (TIN), and the certification of business size must be included in the response. All offerors must have an active registration in the System for Award Management (SAM) www.sam.gov."
All responses must be received by 10:00 AM on September 24, 2019 and reference number 75N95019Q00352. Responses may be submitted electronically to Renee Dougherty at renee.dougherty@nih.gov.
Fax responses will not be accepted.
(xv) The name and phone number of the contracting officer: Renee Dougherty, 301-827-8453.
Renee M. Dougherty, Contract Specialist, Phone 3018278453, Email renee.dougherty@nih.gov
