restrictor, fluid flow
NSN(s): 4730-01-128-4294
Item Description:
RESTRICTOR, FLUID FLOW
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Certificate of Quality Compliance (CoQC) Contract Data Requirements
Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the
Technical Data Package (TDP) for additional information. If
CDRL-COQCCDRLs is missing from DLA Collaboration Folders (CFolders) they
can also be viewed in Appendix 1 of the DLA MASTER LIST OF TECHNICAL AND
QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR
SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE
SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE
ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE
APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON
REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s,
apply to this procurement. Review the Technical Data Package (TDP) for
additional information.
RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND
NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
(End of STO)
Contractor FAT and Government PLT
3/8-24 UNF-3A, CRES MATERIAL. USED ON THE BRU-32A/A, -32B/A BOMB EJECTOR
RACK FOR THE F-14 AND F/A-18 AIRCRAFT.
THIS IS A NAVY IDENTIFIED CRITICAL SAFETY ITEM
(CSI).
ALL REQUESTS FOR WAIVERS OR DEVIATIONS MUST BE
FORWARDED TO THE DSC CONTRACTING OFFICER FOR
REVIEW AND APPROVAL.
.
ALL ITEMS OF SUPPLY SHALL BE MARKED IAW
MIL-STD-129. IN ADDITION, EACH UNIT PACK WILL
BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE),
CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S
CAGE CODE AND PART NUMBER.
THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO
EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND
ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH
JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF
STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL
AGREEMENTS.
TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, MILITARY CRITICAL
TECHNICAL DATA AGREEMENT, FORM IS AVAILABLE AT THE WORLD WIDE WEB
ADDRESS:
https://public.logisticsinformationservice.dla.mil/PublicHome/jcp/defaul
t.aspx
OR BY WRITING TO:
DLA LOGISTICS INFORMATION SERVICE
FEDERAL CENTER
74 WASHINGTON AVE., NORTH
BATTLE CREEK, MI 49037-3084
TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A
CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT,
DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY
THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN
EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 EXEMPTIONS OF
GENERAL APPLICABILITY, AND/OR EAR PART 740 ARE APPLICABLE.
NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE
REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT
OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE
EXPORT CONTROLLED TECHNICAL DATA.
NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO
THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA
UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY
PERMITTED BY DODD 5230.25.
NOTE: THIS IS A RESTRICTED SOURCE ITEM AND
REQUIRES ENGINEERING SOURCE APPROVAL BY THE
GOVERNMENT DESIGN CONTROL ACTIVITY.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
CLASS 3 THREADS APPLY TO THIS NSN.
REMINDER: THIS IS A CRITICAL ITEM AND ALL
MAJOR AND MINOR WAIVER/DEVIATION REQUESTS MUST
BE FORWARDED TO THE DSCC CONTRACTING OFFICER WHO
WILL COORDINATE THE REVIEW AND APPROVAL THROUGH
THE RESPONSIBLE ENGINEERING SERVICE ACTIVITY.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
If this NSN provides Contract Data Requirement Lists (CDRLs) as part of
the Technical Data Package, the line items from this solicitation are
not to be separately priced. Offerors must factor into the end item
unit price all costs associated with the preparation and delivery of the
data deliverables in the contract.
CRITICAL APPLICATION ITEM
Solo Enterprise Corp. DBA Solo Golf 09245 P/N 1534AS152
RAYTHEON COMPANY DBA RAYTHEON 072E5 P/N 1534AS152
MARVIN ENGINEERING CO., INC. DBA 32067 P/N 1534AS152
GARRITY TOOL COMPANY, INC. DBA 4AAQ0 P/N 1534AS152
KLUNE INDUSTRIES, INC. DBA 05DN8 P/N 1534AS152
IAW REFERENCE DRAWING NR 30003 1534AS152
REVISION NR J DTD 11/18/2010
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 30003 3972AS150
REVISION NR B DTD 07/29/2014
PART PIECE NUMBER:
IAW REFERENCE QAP 16236 SQAP011284294
REVISION NR A DTD 06/13/2016
PART PIECE NUMBER:
IAW REFERENCE QAP 13873 CDRL-COQC-16279
REVISION NR DTD 10/05/2016
PART PIECE NUMBER:
Manufacturer's Code and Part Number (if applicable):
Solo Enterprise Corp. DBA Solo Golf 09245 P/N 1534AS152
RAYTHEON COMPANY DBA RAYTHEON 072E5 P/N 1534AS152
MARVIN ENGINEERING CO., INC. DBA 32067 P/N 1534AS152
GARRITY TOOL COMPANY, INC. DBA 4AAQ0 P/N 1534AS152
KLUNE INDUSTRIES, INC. DBA 05DN8 P/N 1534AS152
Quantity (including option quantity): 14,482
Unit of Issue: EA
Destination Information: DLA Distribution Tracy
Delivery Schedule: 400 days (including FAT and PLT)
The solicitation will be available in FedBizOpps on its issue date of 05/15/2017.
Specifications, plans or drawings are not available.
This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data; therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 2304(c)(1). Approved sources are:
Solo Enterprise Corp. DBA Solo Golf 09245 P/N 1534AS152
RAYTHEON COMPANY DBA RAYTHEON 072E5 P/N 1534AS152
MARVIN ENGINEERING CO., INC. DBA 32067 P/N 1534AS152
GARRITY TOOL COMPANY, INC. DBA 4AAQ0 P/N 1534AS152
KLUNE INDUSTRIES, INC. DBA 05DN8 P/N 1534AS152
While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation.
TYPE OF SET-ASIDE: Total Small-Business Set-Aside
mandy l. phipps-kuhlman, Phone 6146928675, Email mandy.phipps-kuhlman@dla.mil
