The RFP Database
New business relationships start here

Zeiss Microscope



Government : Federal
RFP
Go to the link
This document has expired, therefore the above link may no longer work.

Please note that this is NOT a request for quotes or proposals, the Government is seeking information for market research purposes only. The Department of Veterans Affairs, James J. Peter VA Medical Center is currently conducting a market survey for qualified firms capable of providing a: Vario 700 Zeiss Microscope The purpose of this notice is to gain knowledge of potential qualified sources and their size classification//socioeconomic status (service-disabled veteran owned small business, veteran owned small business, HUB Zone, 8(a), small business or large business), relative to NAICS 339114. Note: Set-Aside requirements, Services (except construction). At least 50 percent of the cost of contract performance incurred for personnel shall be expended for employees of the concern. Supplies (other than procurement from a non-manufacturer of such supplies). The concern shall perform work for at least 50 percent of the cost of manufacturing the supplies, not including the cost of materials. Responses to this notice will be used by the Government to make appropriate acquisition decisions. Responses to this notice should include company/individual name, a service capability statement, examples of similar facilities which you have provided services to, DUNS number, address, point of contact and social-economic category (ex: SBVOSB, VOSB, 8(a), HUBZone, WOSB, EDWOSB, Small Business). If your firm is a Service-Disabled Veteran Owned or Veteran Owned Small Business, you must be CERTIFIED in VetBiz (see internet site: http://vip.vetbiz.gov). Contractor must be registered in Central Contractor Registry (CCR) (see internet site: http://www.ccr.gov). Responses to this notice must be submitted in writing (email or fax) and received not later than June 25,2014 at 11:00 AM. A solicitation is not currently available. If a solicitation is issued, it will be announced.
If you have any further question,, please email me at [email protected] OR CALL ME AT 718741-4322.







Description: All items needed

Zeiss Microscope with:
B"    
B"     An integrated auto lamp exchange. When bulb #1 burns out after 500 hours, you can switch in the lamp housing of the scope to bulb #2 with the rotation of the knob without having to stop the case and get a new bulb, or having to re drape with another sterile drape.
B"    
B"    An Auto Balance on the Vario 700
B"    
B"    An Auto Drape on the Vario 700
B"    
B"    A Built in Speed Auto Focus only available in a Zeiss Microscope.
B"    
B"    An integrated built in camera and video components so they are not externally attached and liable to damage as move scope from room to room banging into doors etc.
B"    
B"    Contractor must replace any damaged or defected furniture within 30 days of claim.
B"    Contractor must deliver whole order at one time, no partials.

3. Background: The Zeiss Microscope is needed in Anesthesiology Services to function as a multidisciplinary surgical microscope. The microscope would universally benefit all surgical specialties.






000000-1842-8
823 1 Consisting of OPMIr VARIO 700 with
motorized zoom and varioskop focus
with variable working distance from
200 mm to 500 mm on floor stand with
magentic clutches and manual balancing
(Autobalance optional), Superlux Xenon
illumination with Automatic Iris
Control and Focus- Lightlink,
binocular tube with widefield
---
eyepieces and overhead display. 1 EA
eCMS Item Line ID 8534235

305870-9012-0
000 2 OPMI Vario 700 Floorstand 1 EA
eCMS Item Line ID 8534236

000000-1055-2
278 3 Dust Cover for OPMI Blue 1 EA
eCMS Item Line ID 8534237

302570-9002-0
000 4 OPMI Vario 700 For Integrated Camera
(No Camera Incld) 1 EA
eCMS Item Line ID 8534238

305870-9205-0
000 5 Superlux 300W Xenon W. Autom. Lamp
Exch. 1 EA
eCMS Item Line ID 8534239

305870-9206-0
000 6 Auto Balance Of System
W.Man.Phaseopt. 1 EA
eCMS Item Line ID 8534240

305870-9202-0
000 7 Autodrape 1 EA

305870-9203-0
000 8 Xy Coupling For Vario 700 1 EA
eCMS Item Line ID 8534242

303791-0000-0
000 9 Tiltable Binocular Tube F=170Mm, 180
Degrees 1 EA

eCMS Item Line ID 8534243

305542-0000-0
000 10 Widefield, Push-In Eyepiece 10X 2 EA
eCMS Item Line ID 8534244

000000-1040-0
085 11 Stereo -Bridge 1 EA
eCMS Item Line ID 8534245

303791-0000-0
000 12 Tiltable Binocular Tube F=170Mm,
180 Degrees 1 EA
eCMS Item Line ID 8534246

305542-0000-0
000 13 Widefield, Push-In Eyepiece 10X 2 EA
eCMS Item Line ID 8534258

...301007-000
00-000 14 Rotatable Dovetail Mount For
Binocular Tubes 2 EA
eCMS Item Line ID 8534259

305810-9003-0
000 15 6 pack asespsis caps, for PD
adjustment, 1800 tiltable tube 1 EA
eCMS Item Line ID 8534260

301513-9902-0
000 16 Beamsplitter 50 1 EA
eCMS Item Line ID 8534262

000000-1063-8
869 17 Stereo coobservation tube with two
joints exchange p/n 1139-803 1 EA
eCMS Item Line ID 8534263

---
303791-0000-0
000 18 Tiltable Binocular Tube F=170Mm,
180 Degrees 1 EA
eCMS Item Line ID 8534264

305542-0000-0
000 19 Widefield, Push-In Eyepiece 10X 2 EA
eCMS Item Line ID 8534265

304970-9020-0
000 20 Foot Control Panel Wireless (Fcp
Wl) 1 EA
eCMS Item Line ID 8534266

304970-8730-0
000 21 3m long cable for wired foot pedal 1 EA
eCMS Item Line ID 8534267

---
302570-9772-0
000 22 Integrated Medilive Trio Hd 1 EA
eCMS Item Line ID 8534268

308203-9435-0
000 23 Sony HD recorder HVO 1000MD 1 EA
eCMS Item Line ID 8534269

305870-9038-0
000 24 Tray w. monitor bracket and 22"
monitor 1 EA
eCMS Item Line ID 8534270

305989-8764-0
000 25 Hd-Sdi-Videocable 75Ohm 2Xbnc Stift
10M 1 EA
eCMS Item Line ID 8534271

---
309441-9002-0
000 26 Transport box for OPMI VARIO 700
floor stand (single use, without solid
wood) 1 EA
eCMS Item Line ID 8534272

308203-2220-0
000 27 Keyboard Usb 1 EA
eCMS Item Line ID 8534273

28 SERVICE AND OPERATIONAL MANUAL 2 EA
eCMS Item Line ID 8534274

MICHAEL SMITH
718-741-4322
[email protected]

michael.smith4@va,gov

    1. Home
    2. Articles
    3. Login or Register

    4. Search

    5. Add/Announce your RFP