USCGC HAMILTON (WMSL 753) Dockside Post Shakedown Availability #2 (PSA-2) FY15 FQ4
The U.S. Coast Guard, Surface Forces Logistics Center (CPD-C&P2) is seeking qualified sources to perform dockside repairs of the USCGC HAMILTON (WMSL 753), a 418 foot National Security Cutter home ported at USCG Sector Charleston, Federal Law Enforcement Training Center (FLETC) in Charleston, SC. The planned period of performance will be on or about September 01, 2015 through January 15, 2016. A firm-fixed price contract is anticipated for award.The North American Industry Classification System code (NAICS) is 336611 and the small business size standard is 1,000 employees.
PLACE OF PERFORMANCE: The Cutter's home port at USCG Sector Charleston, Federal Law Enforcement Training Center (FLETC), Charleston, SC.
GEOGRAPHICAL RESTRICTION - None
Work includes, but is not limited to the following:
- Aft Boat Adjustable Cradle and Tie Down Final Modification
- Aircraft Bridge Cranes, Inspect and Test
- Air Flow Sensor Alarm, Install
- Decks Exterior, Preserve
- Fixed CO2, FM 200 and Ansul R-102 Systems Annual Certification
- Flight Deck Net, Weight Testing
- Folding Boom Cranes, Install
- Overhead Light Fixture, Modify
- Side Boat Davit, Replace
- Tanks (Water Mist), Preserve "Partial"
- Water Mist System, Annual Inspection and Biannual Discharge Test, Perform
- Temporary Services, Dockside, Home Pier
- Tenting, Provide
Inspection of Vessel: All prospective offerors are urged to visit the cutter and visually inspect each item of work and to become acquainted with local conditions, locations of items and fixtures, removals, replacements, interference and the nature of work. CGC HAMILTON will be available for ship check on 30APR15 ONLY. To rsvp for a ship check appointment please contact the KS, Jake M. Apolonio at jake.m.apolonio@uscg.mil or 510-637-5416. Responses are due no later than 7:00 a.m. Pacific time, April 22, 2015.
Failure to inspect the Cutter will not relieve the Offeror from the responsibility for properly estimating the difficulty or cost of successfully performing the work.
The Government assumes no responsibility for any representations concerning conditions made by any of its officers, agents, or employees before execution of the contract unless included in the solicitation documents incorporated therein or amendments thereto.
Jake M. Apolonio, Contract Specialist, Phone (510) 637-5416, Fax (510) 637-5978, Email jake.m.apolonio@uscg.mil - Wilma L. Estrada, Contracting Officer, Phone 510.637.5981, Fax (510) 637-5970, Email Wilma.L.Estrada@uscg.mil
