Truck Mounted Service Platform
Required Product Specification
SERVICING PLATFORM TRUCK MOUNTED
MAN TGL 8.160 4x2 BB with Palfinger P 300 KS Access Platform or equal
Technical Requirements:
TRUCK CHASSIS
Manufacturer; MAN chassis TGL 8.160 4X2 BB
Cab: C Compact cab
Wheelbase: 3050 mm
Overhang: 3210 mm
Max. Permissible front axle load: 3700 Kg
Max. Permissible rear axle load: 5600 Kg
Permissible total weight: 7490 Kg
Engine, cooling, clutch
- Engine D0834LFL77 - 160hp / 118kW EURO6, SCR - 600Nm C-R OBD-C (TGL
8.160)
- Fuel filter
- Radiator and intercooler
- Heating for fuel filter
- Connection for external speed control
- Control module for external data exchange (KSM)
- Engine brake
- Speed limiter electronic 90 km / h
- cruise control
- Noise level 78 dB (92 / 97EWG)
Transmission
- ZF 6S-800 OD
- N-output NH / 6C without flange f = 1,01 right
Front axle / springs / axle load front
- front springs parabola 3.8 t
- Permitted VA load 3700 kg
Rear axle / springs / rear axle load
- rear springs parabola 5,6 t
- Permissible HA load 5600 kg
Wheels / rims
- Wheels disc 6-hole 6,00-17,5 to 1.VA TL
Tires
- Front: 2 x 81 225 / 75R17.5 STEERING CLUTCH TL 129/127 M
- Rear: 4 x 81 225 / 75R17.5 ANTR-NAH TL 128/126 M
Fuel tank
- Fuel tank 100l right plastic
- Fuel tank 35l AdBlue
Steering
- steering arrangement left
- Power steering
- Steering wheel height and tilt adjustable
- Steering wheel lock
- Multifunction steering wheel for cab
Frame
- Wheelbase 3600 mm
- Rear frame overhang 1925 mm
- front and rear without underrun protection
- without side protection
- Plastic bumpers
- final traverse
- Bridge attachment angle to the frame
Brake
- MAN BrakeMatic (Electronic Braking System)
Emergency Brake Signal (ESS)
- Emergency Brake Assist2 (EBA2) n. Can be switched off
- Anti-lock braking system (ABS)
- Drive skid control (ASR)
- Electronic Stability Program (ESP)
- Disc brake for front and rear axle
- Without brake connection at the frame end
- Compressed air filling connection at the front
- Air dryer
Cab exterior
- Cab "C" 2240mm wide, 1620mm long
- Windscreen tinted laminated glass
- Door windows tinted
- Cab rear wall without windows
- curb mirror right
- EU front-view mirror on the passenger side
- rear view mirror and wide-angle mirrors heat able and electrical adjustable
- Mirror arms for a body width of 2500-2600mm
- Spray reduction
Cab inside
- Driver's seat air-sprung with lumbar support
- Passenger seat fixed statically
- Door window lifter electric for driver and front passenger
- Air conditioner
- Storage compartment above windscreen
- Plastic flooring for floor and engine tunnel
Displays
- Instrument panel km / h 'High-Line'
- Digital tachograph
Lights
- Side marker lights
- Wiring harness for tail lights
- Halogen rotating beacon (yellow) on driver's cab right
Radio
- Radio MAN Media Truck 12V with 5 'color display
- without navigation SD
Electrical system
- Main battery switch mechanical
- Batteries 12V 88Ah 2 pieces
- 12 Volt outlet
Load variations and miscellaneous
- Load variant 7490 kg
- Maximum vehicle width 2550 mm
- Front mud flaps
- plastic mudguard rear (full shell)
Break-down warning sign loose
- 1-wheel chock
- Cabin painting in RAL 2011 deep orange
- 2 rotating beacons on the cab roof
Dimensions with structure:
Vehicle height: 3,500 mm
Vehicle length: 7,600 mm
Vehicle width: 2,555 mm
P 300 KS ACCESS PLATFORM or equivalent
•Patented counter slewing system enables slewing within the mirror width of the chassis
•Reach optimization thanks to coordination of stabilizer position, set-up angle inclination
and basket load
•Robust aluminum workman basket with 350 kg basket load
•Flat substructure under the workman basket allows users to get as close to obstacles
as possible
•Sensitive, electronically controlled proportional control of all movements from the
workman basket and
from the base
Fully variable support, fully automatic support leveling
- Cranking table
- Maximum mobility of the lifting device despite retracted supports
- Operating the vehicle with the boom on the lifting arm rest
- Memory function
- Shutdown of device movements when basket is accidentally put on.
- Large basket turning area
- Power supply to the basket with 24V battery voltage and external 230V supply on
Vehicle frame (including FI switch).
- Transport of bulky work materials on the frame cover by aluminum drop sides against
Slipping secured on both sides hinged.
- Range optimization by monitoring the erection inclination. Fast, safe work despite
Vehicle inclination. Maximum ranges for horizontal vehicle alignment.
- 4 non-slip safety underlay boards (incl. Screed mount).
- Color graphic display with function keys in the basket control
- Engine start-stop buttons
- The current voltage of the vehicle battery is permanently monitored
- Illumination of all control elements for supports and stage operation
- Spare tire attachment on the device support instead of in the vehicle dirt area.
- Warning strips on the work basket according to DIN 30710 red / white
- Painting the device in Palfinger standard paint
- TÜV inspection, inspection book, CE mark,
EC declaration of conformity, log book
Additional plastic work basket
with closable opening on the rear wall, 1.60 mx 0.80 mx 1.10 m high,
Short rear attachment (with integrated rear lighting)
Double isolation
- against 1000V according to DIN VDE 0682-742.
- isolated structure of the electronics
- Insulation test of the machine according to DIN VDE 0682-742
- logbook entry
- Strobe lights fixed left and right on the turntable
- Partition grille with holder on lifting arm rest
- Power supply at the base 230 V AC
via Schuko plug, incl. RCCB connected to the standard electrical cable
230V / 10A, Schuko socket in the work basket
- Height limitation without key switch
- without key switch, height and PIN freely programmable
- Free lift monitoring for both axles with one sensor per wheel
- Painted sidewall
- Holder for traffic cone chassis cover
- 4 lashing eyes in the aluminum cover
TECHNICAL DATA FOR CHASSIS
- not less but Max. height of work 30 m
- not less but Max. basket floor height 28 m
- not less but Max. horizontal outreach /with basket load 20.5 m
- Slewing range of basket 2 x 85°
- Hydraulic jib boom, working range 195°
- not less but Max. stabilizer spread 5.02 m
- not less than basket load 350 kg
- Workman basket - breadth / length / height 1.80 x 1.00 x 1.10 m
- Max. height of work 30 m
- Max. basket floor height 28 m
- not less but Max. horizontal outreach /with basket load 20.5 m
- Slewing range of basket 2 x 85°
- Hydraulic jib boom, working range 195°
- Max. stabilizer spread 5.02 m
- max. basket load 350 kg
- Workman basket - breadth / length / height 1.80 x 1.00 x 1.10 m
- Permitted pitch 5 °
- Height in transport position 3.5 m
- Width in transport position 2.52 m
- Total length 7,60 m
- Wheel Base 3,05 m
- Total weight 7350 kg
DOCUMENTATION:
German Tüv certification
Vehicle Title (Zulassungsbescheinigung Teil II)
2 copies of the manual for the truck and crane in German and English
2 copies of spare part list
INSTRUCTION:
Instructions and training to employees to show how to operate platform and vehicle.
Instructions on site has to be in fluent German language.
AFTER SALES/WARRANTY:
Vendor has to be locally present within a 300 km radius of Katterbach Kaserne (USAG
Ansbach) to provide emergency support when required. (Proof required such as
business address according to Cage Code as reference).
Melissa J. Golicz, Contract Specialist, Phone 0049 9641-83-8714, Email melissa.j.golicz.civ@mail.mil - Andrea Schottenhammel, Contracting Officer, Phone 004909641838728, Email andrea.schottenhammel.ln@mail.mil
