Sources Sought FIS Booth
Furnish, for installation by others, prefabricated and assembled Federal Inspection Service (FIS) booth for use by U.S. Customs and Border Protection (CBP) Officers. The booth shall be manufactured to meet Buyer specifications. The FIS should meet at a minimum the following requirements:
• 8 ft by 18 ft prefabricated, self-supporting, welded galvanized steel structure furnished for installation by others on existing asphalt, concrete pavement, or elevated steel structure
• FIS booths will be located in a seacoast environment. To the greatest extent possible, furnish a system of one material type. Provide galvanic separation of all materials that are not galvanically compatible
• Highly insulated booth envelope
• Hip roof with 24 in. overhang on the side with exterior doors
• Perimeter roof gutters with downspouts routed to avoid doorways, stairs, exterior mounted cameras, or landings
• Electrical service: Attached 100 A or 200 A main service disconnect, interior mounted 100 A or 200 A power panel with breakers and circuits sufficient to supply all booth systems, an integrated manual transfer switch, and prewired interior and exterior lighting switches and power receptacles
• Electric heating integrated with the HVAC system and exterior wall-mounted air conditioning unit with louvered vents and capability of recirculating air without cooling
• Full booth shell and glazing hardening to meet a minimum of UL752 Level 3 bullet resistance. Booth and door prewired for an Intrusion Security System
• FIS booth shall comply with ASCE 7 Minimum Design Loads for Buildings and Other Structures, the international building code
• Fabricate FIS booths with integral forklift and crane pockets for handling at site
• Capability to deliver booth to required job site
• Material Warranty: The manufacturer shall warrant that the materials and accessories furnished in accordance with these specifications shall remain free from defects in materials and workmanship for a period of 1 year
Highly detailed drawings and specifications will be furnished with the solicitation package.
Richard D. Dennis, Sr. Contracts Specialist, Phone (509) 371-7913, Fax (509) 371-7670, Email rick.dennis@pnl.gov
