The RFP Database
New business relationships start here

SOLE SOURCE-TYCO CONNECTORS.-THIS PROCUREMENT IS FOR (QTY 2000) TYCO Connectors to be used as components and subcomponents utilized on the ALQ-184 Power Supplies.


Indiana, United States
Government : Military
RFP
Go to the link
This document has expired, therefore the above link may no longer work.

N0016417Q0069 -SOLE SOURCE-TYCO CONNECTORS.-THIS PROCUREMENT IS FOR (QTY 2000) TYCO Connectors to be used as components and subcomponents utilized on the ALQ-184 Power Supplies.
NAICS 334417 FSC 5935 Issue Date: 01 JUN 2017 Closing Date: 13 JUN 2020 Time 10:00 A.M. EDT.
SOLE SOURCE PROCUREMENT: The proposed contract action is for the supplies or services for which the government intends to solicit and negotiate with one source, Powell Electronics. 7705 Industrial Drive Suite C Spring Grove, IL 60081 CAGE CODE: 3HVB1. All responsible sources may submit a quote which shall be considered by the Government. However a determination by the Government not to compete with this proposed contract based upon responses to this solicitation is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement.
This solicitation is being posted to both the Federal Business Opportunities (FBO) page located at http://www.fbo.gov/. While it is understood that FBO is the single point of entry for posting of synopsis and solicitations to the internet. Please feel free to use the FBO site to access information posted by NSWC Crane.
Naval Surface Warfare Center (NSWC) Crane Division intends to solicit, negotiate, and enter into a Firm Fixed Price Commercial Supply Contract IAW FAR 13, Simplified Acquisition Procedures for the following procurement:
CLIN0001 QTY 2000 Each, TYCO Connectors P/N 867483-1
Base Award CLIN 0001 - QTY 2000
PN-867483-1
FOB Destination
Crane, IN 47522

Statement of Work
For High Voltage Connectors
01 JUNE 2017


1.0 SCOPE
This Statement of Work (SOW) establishes the requirements for the manufacture of the High Voltage Connectors for use in the repair/production of the components and subcomponents utilized on the ALQ-184 Power Supplies.


2.0 APPLICABLE DOCUMENTS
867483-1 High Voltage Connectors


3.0 REQUIREMENTS
The contractor shall provide equipment, parts, material and labor necessary to manufacture the high voltage connectors.


3.1 The contractor shall provide two thousand (2000) High Voltage Connectors in accordance with the part number referenced in paragraph 2.0 of SOW.


4.0 GOVERNMENT FURNISHED MATERIAL


4.1 There is no Government Furnished Material (GFE).


5.0 OTHER CONSIDERATIONS
5.1 The contractor shall provide a Certificate of Compliance.


5.2 Technical Point of Contact is Beth Huff, 812-854-1244, beth.huff@navy.mil.




Inspection and Acceptance is to be at destination with deliver F.O.B. Destination: NSWC Crane, IN 47522-5001.
To be eligible for award of a Government contract, contractors must be properly registered in the System for Award Management (SAM). The link to the website is https://www.sam.gov
All changes to the requirement that occur prior to the closing date will be posted in FedBizOpps. It is the responsibility of interested vendors to monitor the FedBizOpps for amendments that may be issued to this solicitation. For changes made after the closing date, only those offerors that provide a proposal will be provided any changes/amendments and considered for future discussions and/or award.
No hard copies of the solicitation will be mailed. Quotes must be submitted in the format specified in the solicitation. It is the responsibility of the offeror to submit offers to the POC at NSWC Crane.
The POC is Ms. Theresa Jones, Code 0253, Telephone 812-854-4338. Offers may be emailed to Theresa.a.jones2@navy.mil. All required information must be received on or before 08 JUNE 2017. Time 10:00 A.M.


Theresa Jones, Phone 812-854-4338, Email Theresa.a.jones2@navy.mil

    1. Home
    2. Articles
    3. Login or Register

    4. Search

    5. Add/Announce your RFP