Portable Pull Up Bar
PORTABLE PULL UP BAR
- Must be metal and coated to protect from weather and climates; must be able to remain in harsh climates for extended periods of time.
-System must be self-supporting. System must allow for a single person, weighing not more 350lbs to swing to horizontal without tipping over.
-Must be able to support a single person at a weight of 350lbs from cross bar.
-Cross bar must be 1.5in outside diameter -Cross bar must be no less than 8ft (96in) from ground, no greater than 9ft (108in) from ground.
-The distance from inside of support post to inside support post must be 62in (+/- 1in)
-Must have assist step, capable of mounting on frame at 18in and 24in from ground -Must be portable and easily broken down. Required tools must be included.
-Must come with a storage device: When in storage total weight should not exceed 75lbs.
-Must be transportable and disassemble to be lie flat with no more than 12" height and 108" long per individual piece and 24" height total of kit when disassembled. Total Length not to exceed 108" Width not to exceed 90" disassembled
Mark R Hirsch, Phone 586-282-2465, Email mark.r.hirsch.civ@mail.mil
