PVC Plastic film for Hoods
***** This is a REQUEST FOR INTEREST ONLY! This request does not constitute a request for proposal, request for quote, or invitation for bid. The intent of this request is to identify potential offerors for market research purposes only. *****
Request for Information (RFI)
Savannah River Nuclear Solutions, LLC (SRNS), which manages and operates portions of the Savannah River Site (SRS) under a Department of Energy (DOE) prime contract, seeks information from parties, capable of providing PVC film, that is used for the fabrication of fresh air hoods.
SRS plastic hoods are used in airborne radiological and chemical contamination areas. It is designed to provide a continuous flow of grade "D" breathing air (CGA/ANSI G-7.1-2004) to the user with a protection factor of 1,000. The hood consists of a one-piece clear plastic helmet, securely sealed to a shoulder-length cape. The cape is fitted with elastic straps, which permit securing the cape under the user's arms. The plastic hood PVC film must comply with the following standards.
ASTM D 1593-99 Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting (Except burning rate and low temperature impact)
ASTM D-882-8809 Tensile Properties of Flexible, Vinyl Chloride Plastic Film
ASTM D 1004-94A Initial Tear Resistance of Plastic Film and Sheeting
NFPA 701-89 04 Standard Methods of Fire Tests for Flame-Resistant Textiles and Films
ANSI/ASQ Z1.4-2003 Sampling Procedures and Tables for Inspection by Attributes
FED-STD-191A Test Method 5874 - Temperature, Low; Effect on Coated Cloth
MIL-P-18080-89, Rev. A (2) Plastic Sheets, Vinyl, Flexible, Transparent, Optical Quality
Expression of Interest to this RFI shall submitted via email to Navin.Ponnala@srs.gov, 803-952-8834 by, October 18, 2019 at 5:00 p.m.
Supplier's response to this RFI does not guarantee they will be selected to participate in the RFP event.
NAVIN C. PONNALA, Acquisition Planner, Phone 8039528834, Email navin.ponnala@srs.gov
