The RFP Database
New business relationships start here

OrderPicker


Maryland, United States
Government : Federal
RFP
Go to the link
This document has expired, therefore the above link may no longer work.

Statement of Need
For the Raymond Order Picker 5300
3 September 2019

 


The NIH Clinical Center MMESD is the sponsoring institution at the National Institutes of Health responsible for providing medical/surgical, and cleaning supplies in support of patient care. The Gaithersburg Distribution Center (GDC) staff is currently using the Raymond Order Picker 5300 and they have frequency code already installed at the GDC to operate the wire guide system, which will prevent the Order Picker from hitting the racks that store the supplies. We do not have a material handling equipment called the Order Picker model 5300 to pull the medical supplies from the warehouse storage racks. Instead, we are relying on the GDC staff to pull the supplies when they can. This is creating a backlog for our staff, because of the long wait time. By having our own Order Picker 5300, this will alleviate that lag time. The Raymond Order Picker 5300 meets our safety, ergonomics and compatibility needs with our counterparts at the GDC. We would prefer the Raymond Order Picker 5300 over the Crown and Hyster models. If we do not get the Order Picker, the pulling of customer orders will continue to be slow and impact patient care, because we will not be able to deliver medical supplies to the Clinical staff in a timely manner.


The Order Picker that we need is the Raymond Order Picker model 5300 and with the following specifications and features:
5300 ORDER PICKER Specifications
Order Picker Carrier (OPC) 30TT Standard
Power Unit 24 volts Maximum Vehicle Capacity 3000 lb.
Overall Collapsed Height of Mast 107 in. Overall Elevated Height of Forks 240 in.
Base Leg O (Outside) 40 in. Overall Truck Cap 3000 lb.
Capacity 3000 lb. Battery Max Amp Hour 1085 amp-hour
Battery Max Weight (lbs.) 2000 lb. Battery Max Width (in.) 13 in.
Battery Min Weight (lbs.) 920 lb. Battery Weight (Min-Max) 920 lb.
Load Size Length 48 in. Load Size Width 40 in.
Load Size Height 48 in. Horizontal Load Center (in.) 24 in.
Vertical Load Center (in.) 24 in. Fork Engagement (percentage) 88 %
Manuals Quantity 1 ea.


Model 530 OPC30TT 107/240 3 Stage
Alarm Electronic All Travel
Light Strobe Warning LED Blue
Harness Full Body and Energy Absorbing Tether
Standard Warranty Coverage
Guidance Wire Sensor 6.25 KHz 225 ma p p
Batteries - 12-125-13 New Industrial Battery w/ Watering System (1)
Chargers - 3NE12-750 New Industrial Charger (1)
Manuals (1):
STANDARD FEATURES


POWER UNIT
• The ACR SystemTM
• 24 Volt


OPERATOR COMPARTMENT
• Ergonomically Advanced Simultaneous Function Control Handle with
Integral Lift/Lower Control
• ANSI/ITSDF B56.1 Compliant Fall Protection System: Full Body Harness
and Tether
• Operator's Display (Battery Discharge, Steer Indicator, Clock Calendar
and Selectable Display)
• Floor Mat, Cushioned, Bubble-Style
• Pencil Tray, Operator Hand Rest, and Storage Space for Supplies
• Programmable Performance
• Battery Discharge Indicator with Lift Interrupt
• Steering Indicator in Operator Compartment
• Brake, Electronic Disc
• Configure Mode with Password Protection
• Deadman Pedal, Large, Round Flush-Mounted
• Hour Meters: Key Hours, Deadman Activated, Time Spent Lifting,
Distance Traveled
PERFORMANCE
• Lift, DC
• Drive, AC
• Lift Deceleration Near Full Elevation
• Maintenance MinderTM Tool
• Mast, Anti-Rattle
• Mast, Clear-View
• Mast, Lowering Deceleration
• Mast, Speed Variable Lift/Lower
• Mast, Spring Suspension System
• Mast, Staging System (See Specific Truck Mast Footnotes For Some
Exclusions)
• Pallet Clamp (1.25 to 2 in.)
• Parking Brake, Automatic Engaging
• Power-up and Run Diagnostics
• Real Time Coded Fault Detection
• Battery Gates, Adjustable
• Brake, Electronic Disc
• Regenerative Braking
**Battery cover shown is optional.


DESIGN AND MAINTENANCE
• ANSI/ITSDF B56.1 Compliance
• Regenerative Braking
• Raymond TM Red Finish with Black Mast
• Separate Lift, Travel, and Steer Motors
• Side gates, Fixed loop
• Battery Rollers, Corrosion Resistant
Chargers - 3NE18-750 New Industrial Charger (1)
• Solid State Limit Switches
• Steering, Automatic Centering at Start-Up
• Steering, Electronic Power
• Tether Bar Hook-up, Full Length
• Thermal Limiting
• Tractor cover, high impact
• UL "E" Type Construction


• Warranties, Asset Protection
• Standard Warranty Coverage
• Structural Extended Warranty
FEATURES AND BENEFITS


ECO-PERFORMANCE
• Exclusive ACR System TM enables faster, more responsive speeds,
provides better performance with fewer battery changes and more
uptime, and easier load handling
• High efficiency design permits smaller, less expensive power
packages to achieve capacity and shift life
ERGONOMICS
• Enhanced diagnostics, including on-board, self-checking
capabilities for regulating motor performance
• ACR System TM has fewer parts to repair and faster troubleshooting,
for reduced downtime
• Impact-resistant cover allows easy access to the drive tire and
other components
• Hydraulic mast staging reduces wear and provides a smoother ride


MAINTAINABILITY
• Enhanced diagnostics, including on-board, self-checking
capabilities for regulating motor performance
• ACR System TM has fewer parts to repair and faster troubleshooting,
for reduced downtime
• Impact-resistant cover allows easy access to the drive tire and
other components
• Hydraulic mast staging reduces wear and provides a smoother ride
• Electronic disc brake with plugged braking minimizes wear


PRODUCTIVITY
• Simultaneous function handle integrates lift/lower control
• Electronic power steering with auto-steer centering reduces risk of
damage to the trucks, product and racks
• Infinitely variable lift/lower controls provide smooth, precise lift and
lower motion for the platform
• Precise feathering of the platform takes the operator closer to the
pick
• Optional intelliguide TM digital wire guidance system offers excellent
tracking and stability


VERSATILITY
• Easily programmable performance that allows custom configuration
• Auto-locking pallet clamp adjusts automatically to handle 1.25 to 2
inch stringer boards. Optional pallet clamp handles string boards to
5 in.
• A variety of harness and tether options are available
• Optional LED light packages improve operator visibility
• Optional intelliguide TM locks the truck on a set path in very narrow
Aisles


Please email all quotes to Lynda at Colelj@cc.nih.gov by 9/20/19 2:00 pm est


Lynda Cole, Contract Specialist, Phone 301-594-3111, Fax 301-594-5920, Email Colelj@cc.nih.gov

    1. Home
    2. Articles
    3. Login or Register

    4. Search

    5. Add/Announce your RFP