The RFP Database
New business relationships start here

One new Mil-Spec Cat D7R-II Dozer for the Dredge Goetz Fleet.


Minnesota, United States
Government : Military
RFP
Go to the link
This document has expired, therefore the above link may no longer work.

Supply to the Government One (1) Track- type low speed crawler tractor (bull dozer). Dozer shall be equipped with an enclosed sound suppression pressurized operators cab to include heat and air conditioning. The dozer shall be equipped with all industry standard safety items to include but not limited to Seat belt, back-up alarm, FOPS AND ROPS, wind shield wipers, horn, front and rear lighting. This machine operates on a 24 hour a day schedule so the maximum amount of outside lighting shall be installed. Due to operational conditions, including work in dredge slurry, the offered dozer shall be equipped with high final drives. We are offering a D7R II Caterpillar Dozer on trade.
Machine specifications:
Gross Horse power rating 258
Flywheel horse power (net) 240
Fuel tank capacity not less than 126 gallons
Minimum Operating weight 63,000 lbs
Minimum track shoe width 26 quote mark
Track rails shall have rotating pin and bushing
Semi u blade with a minimum capacity of 8.90 cubic yards
Minimum blade width 12'1 quote mark
Winch Equipped with drum capacity of 175' of 1 quote mark wire rope
ROPS shall meet or exceed standards defined in SAE J1040 May94, ISO 3471:1994
FOPS shall meet or exceed standards defined in SAE J/ISO Apr 98 Level II and ISO 3449:1992 Level II
Overall length of track on ground shall be a minimum of 114 quote mark
The offered tractor shall be a new zero hour machine
Delivery shall be included in the overall cost, FOB Fountain City WI
Dozer shall be delivered in a fully operational condition with all installed safety equipment fully operational
2 sets of manuals (operators manual, parts manual, service manual)
Freshwater fordable to a Minimum of 30 quote mark
Integrated MIL-STD-209K lifts and tie down provisions on machine, cab, ROPS, push arms and blade


Trade-in D7R
Serial Number CAT00D7RPAGN00632
Arrangement # 1625795
Operating hours 10,390
Purchased new Nov 2003
Bidders are encouraged to conduct their own inspection of the trade-in Dozer. Inspections can be setup through Joe Kupietz, 651-290-5985 or Jake Bernhardt, 651-249-6068.
Location:
Fountain City Service Base
431 North Shore DR
Fountain City WI 54629




Jesse Onkka, 6512905444

USACE District, St. Paul

    1. Home
    2. Articles
    3. Login or Register

    4. Search

    5. Add/Announce your RFP