The RFP Database
New business relationships start here

Milling Machine for the Cincinnati VA Medical Center


Ohio, United States
Government : Federal
RFQ
Go to the link
This document has expired, therefore the above link may no longer work.

Milling Machine for Cincinnati VAMC


This is a Sources Sought (SS) Notice only, not a solicitation announcement and should not be considered as such. There is not a solicitation available at this time. The Government will not pay for any information received in response to this SS, nor will the Government compensate any respondent for any cost incurred in developing the information provided to the Government. This SS does not constitute a commitment by the Government. Any information provided in response to this market survey will be used for informational purposes only and will not be released. Vendor participation is not a promise of future business with the Government. The purpose of this SS is to conduct Market Research to determine an acquisition strategy for a one-time firm fixed-priced contract action a milling machine that will be used by the Engineering Department at the Cincinnati VA Medical Center.

Please provide product information equivalent to:
Bridgeport Series I Standard Knee Mill:
SERIES I KNEE MILL-R8 SPIN-XPF, Part Number: BPKMR8PF

Installed Kneemill Options
DRO 200S SYS 48 X&YZ AX INSTL, Part Number: BP 11810526INS
POWER DRAW BAR 2J-R8 INSTALLED, Part Number: BP 12570955INS
NFPA CONTROL ENCLOSURE, Part Number: BPD11591400INS
WORKLIGHT W/NFPA TWISTLOCK, Part Number: BP 13062592
ACCU-LUBE MIST COOL SYS (ELEC), Part Number: BP 11560605INS
Y-AXIS TRAVEL STOP INSTALLED, Part Number: BP 13290001INS
Sandvik CoroMill 390: 1/2" Indexable end mill 5/8" shank (Most Popular), Part Number: 69826205025
(Set) of R-8 Collets (1/8" to 3/4" (in 1/16"increments) 11 pieces, Part Number: 09420019000011
R-8 Collets (1/16" to 3/4" in 1/16 increments) 12pieces, Part Number: 0956000000R812
6" Kurt Vise DX6 Manual Vise, 6" w/ 9" opening, Part Number: DX6 Vise Step Key Kit (11/19"x5/8")
Part Number: D50-33A, Additional Installation, Operation

The Department of Veterans Affairs, Network Contracting Office 10, is conducting market research to determine if there are other solutions equal to the referenced, responsible sources available to satisfy this requirement, identify the business size of available sources, and to determine if there are a sufficient number of Small Business concerns capable of performing the requirements to warrant a set-aside. The proposed solicitation is to furnish all materials, labor, equipment and transportation required to provide supplies to the Department of Veterans Affairs, Cincinnati VA Medical Center. Contractor shall also comply with any other federal, state, and local laws applicable to the industry.

Potential sources must demonstrate experience and knowledge of required services and capability to provide such services. Potential sources should submit:

business name and address;
point of contact;
business size, and any applicable business socio-economic category;
capability statement;
provide information for recent and relevant projects similar in nature;
DUNS number;
contract number if applicable; and
brochure of equipment.

The NAICS code for this procurement is 333517 and the small business size standard is 500 employees.

Responses to this notice shall be e-mailed to Ronetta Sweeney at Ronetta.Sweeney@va.gov. Enter RFQ No. 36C25019Q0811/ Milling Machine for Cincinnati VAMC in the email subject line. Telephone responses will not be accepted. Responses must be received in writing no later than 12:00 p.m. EST, Thursday May 24,2019. This notice is to assist the VA in determining sources only. A solicitation is not currently available.

THE VA IS NOT SEEKING PRICING OR OFFERS OF ANY KIND. There is no guarantee, expressed or implicit, that the market research for this acquisition will result in a particular set-aside or sole source award, or any other guarantee of award strategy. All information is to be provided on a voluntary basis at no charge to the Government.

Ronetta Sweeney

Contracting Officer

    1. Home
    2. Articles
    3. Login or Register

    4. Search

    5. Add/Announce your RFP