IDPO SOLICITATION 2610-00-142-5160
This solicitation is for aN Indefinite Delivery Purchase Order (IDPO) for the acquisition of the following: 2610-00-142-5160 (TIRE,PNEUMATIC) not to exceed 6 months or $150,000.00, whichever occurs first. This solicitation will be available for download on the DLA Internet Bid Board System (DIBBS) at https://www.dibbs.bsm.dla.mil/RFP/ on or about 05/28/2014; however, **DIBBS quotations are not acceptable for this solicitation.** Quotes must be submitted on hard copy of the RFQ and either faxed to the attention of Coleen Ross at 614 693 1619 or scanned and emailed to [email protected]
Note - Though this is an RFQ, the solicitation can only be found by searching RFP/IFB Database in DIBBS.
All responsible sources may submit an offer/quote which shall be considered.
The Small Business size standard is 1,000 employees.
Drawings/specifications are not available.
This proposed procurement includes an item within the Federal Supply Class 2610.
This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data; therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 2304(c)(1). Approved sources are: MANUFACTURER'S CAGE CODE (08SN2),PART NUMBER PCT182F
While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation.
NAICS Code - 326211
NSN: 2610-00-142-5160
TIRE,PNEUMATIC,VEHICLE
** EXCEPTION: This shelf life item is
Non-Extendable, Code S, with a total shelf
life of sixty months. Material furnished
under this contract/order shall have at least
42 months of shelf life remaining at time of delivery. **
** EXCEPTION: Vendor must include a flap
with each tire. **
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
MIL-STD-130N(1) DATED 16 NOV 2012.
IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
TIRE CHARACTERISTICS
MANUFACTURER'S CAGE CODE (08SN2),PART NUMBER PCT182F
TIRE SIZE DESIGNATION: 23X8.50-12
TIRE STRENGTH: LOAD RANGE F
TIRE LOAD MAX. CAPACITY: 2170 LBS
MAX. INFLATION PRESSURE: 68 PSI
MATERIAL: RUBBER, NATURAL
TIRE CONSTRUCTION: BIAS
TIRE AIR RETENTION METHOD: TUBE TYPE
FLAP: YES
SERVICE TYPE: MATERIAL HANDELING EQUIPMENT TRAILER
TREAD DESIGN: HIGHWAY REGULAR
APPLICATION: AIR FORCE MHU83/MJ40 BOMB LOADER (REAR AXLE)
MIL-DTL-4M
10 January 1997
3.3.2.1.4 Tires with flaps.
Flaps shall be rolled and placed inside the tire. When the size of the rolled flap and normal distance between beads assure that flap will remain in place during normal handling and transportation, no tying is required. When the size of the rolled flap is such that it will not be securely held within the tire, it shall be secured within the tire using twine conforming to A-A-228 or A-A-145 1, or nonmetallic strapping conforming to ASTM D3950, in such a manner as to assure safe delivery. When it is too difficult to insert the rolied flap within the tire, it shall be secured within the tire in the normal installed position. Safe transportation shall be ensured by securing flaps within the tire using twine conforming to A-A-228 or A-A-145 1, or nonmetallic strapping conforming to ASTM D3950.
Packaging and Marking: Commercial
Coleen M. Ross, ACQUISITION SPECIALIST, Phone 6146926815, Fax 614-693-1619, Email [email protected]
