HANDSET
NSN: 010967825
HANDSET
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO,OR COME IN DIRECT
CONTACT WITH,ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
IF THE APPLICABLE (OEM OR MILITARY) DRAWING,
SPECIFICATION, STANDARD, OR QUALITY ASSURANCE
PROVISION (QAP) SPECIFIES AN ACCEPTABLE QUALITY
LEVEL (AQL), THE SAMPLING ACCEPTANCE NUMBER
SHALL BE REDUCED TO ZERO (0). FOR EXAMPLE, IF
THE ACCEPT REJECT CRITERIA IS ACCEPT ON (3)
DEFECTS AND REJECT ON (4) DEFECTS, THE NEW
ACCEPT REJECT CRITERIA IS ACCEPT ON (0) DEFECTS
AND REJECT THE ENTIRE LOT ON (1) DEFECT. EVEN
THOUGH THE ACCEPTANCE LEVEL IS ELIMINATED, THE
SAMPLE SIZE REMAINS THE SAME.
NOTE: HANDSET SHALL BE PERMANENTLY MARKED IAW PARA. 3.1.3
OF DWG 76E3N125-1 (28687) AND SHALL INCLUDE THE CONTRACT NUMBER.
ADEQUATE DATA FOR THE EVALUATION OF ALTERNATE
OFFERS IS NOT AVAILABLE AT THE PROCUREMENT
AGENCY. THE OFFEROR MUST PROVIDE A COMPLETE
DATA PACKAGE INCLUDING DATA FOR THE APPROVED
AND ALTERNATE PART FOR EVALUATION.
THE TECHNICAL DATA CITED IN THIS SOLICITATION IS
NOT COMPLETE, HOWEVER, THE ITEM PROVIDED MUST
MEET THE REQUIREMENTS OF THE CITED TECHNICAL
DATA IN ADDITION TO THE REQUIREMENTS OF THE
PART NUMBERED ITEM LISTED ON THIS SOLICITATION.
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED-
ONLY ITEMS.
THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO
EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA
AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED
THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE
DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO
INTERNATIONAL AGREEMENTS.
TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, "MILITARY
CRITICAL TECHNICAL DATA AGREEMENT," FORM IS AVAILABLE AT THE WORLD WIDE
WEB ADDRESS HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO:
DLA LOGISTICS INFORMATION SERVICE
FEDERAL CENTER
74 WASHINGTON AVE., NORTH
BATTLE CREEK, MI 49037-3084
TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A
CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT,
DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY
THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN
EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 "EXEMPTIONS OF
GENERAL APPLICABILITY," AND/OR EAR PART 740 ARE APPLICABLE.
NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL
DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN
APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO
RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA.
NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO
THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA
UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY
PERMITTED BY DODD 5230.25."
ROANWELL CORPORATION DBA PARAMOUNT 82872 P/N 502-228-002-653
JOYCE TELECTRONICS CORP DBA 22861 P/N 76E3N125-1
IAW REFERENCE DRAWING NR 28687 76E3N125
REVISION NR V DTD 10/07/1986
PART PIECE NUMBER: 76E3N125-1
REFERENCE NUMBER:ZD025
REFERENCE NUMBER:E0096
REFERENCE NUMBER:E0116
REFERENCE NUMBER:E0165
REFERENCE NUMBER:E0114
REFERENCE NUMBER:CS001
PREP FOR DELIVERY
LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS
-
** Packaging Text
-
SHALL BE PACKAGED STANDARD COMMERCIAL IN ACCORDANCE WITH ASTM D 3951.
Markings Paragraph
When ASTM D3951, Commercial Packaging is specified, the following apply:
,,All Section "D" Packaging and Marking Clauses take precedence over
ASTM D3951.
,,In addition to requirements in MIL-STD-129, when Commercial Packaging
is used, the Method of Preservation for all MIL-STD-129 marking and labeling shall be "CP" Commercial Pack.
,,The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified
in the contract take precedence over QUP in ASTM D3951.
*** LTC PID Packaging Header Text ***
-
************************************************************************************************************
-
GLOSSARY
-
************************************************************************************************************
PACKAGING TEXT
-
THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:
Markings Paragraph
When ASTM D3951, Commercial Packaging is specified, the following apply:
,,All Section "D" Packaging and Marking Clauses take precedence over
ASTM D3951.
,,In addition to requirements in MIL-STD-129, when Commercial Packaging
is used, the Method of Preservation for all MIL-STD-129 marking and labeling shall be "CP" Commercial Pack.
,,The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified
in the contract take precedence over QUP in ASTM D3951.
-
ITEM DESCRIPTION TEXT
-
-
REFERENCE NUMBER ZD025
-
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO,OR COME IN DIRECT
CONTACT WITH,ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
-
-
REFERENCE NUMBER E0096
-
IF THE APPLICABLE (OEM OR MILITARY) DRAWING,
SPECIFICATION, STANDARD, OR QUALITY ASSURANCE
PROVISION (QAP) SPECIFIES AN ACCEPTABLE QUALITY
LEVEL (AQL), THE SAMPLING ACCEPTANCE NUMBER
SHALL BE REDUCED TO ZERO (0). FOR EXAMPLE, IF
THE ACCEPT REJECT CRITERIA IS ACCEPT ON (3)
DEFECTS AND REJECT ON (4) DEFECTS, THE NEW
ACCEPT REJECT CRITERIA IS ACCEPT ON (0) DEFECTS
AND REJECT THE ENTIRE LOT ON (1) DEFECT. EVEN
THOUGH THE ACCEPTANCE LEVEL IS ELIMINATED, THE
SAMPLE SIZE REMAINS THE SAME.
-
-
REFERENCE NUMBER E0116
-
ADEQUATE DATA FOR THE EVALUATION OF ALTERNATE
OFFERS IS NOT AVAILABLE AT THE PROCUREMENT
AGENCY. THE OFFEROR MUST PROVIDE A COMPLETE
DATA PACKAGE INCLUDING DATA FOR THE APPROVED
AND ALTERNATE PART FOR EVALUATION.
-
-
REFERENCE NUMBER E0165
-
THE TECHNICAL DATA CITED IN THIS SOLICITATION IS
NOT COMPLETE, HOWEVER, THE ITEM PROVIDED MUST
MEET THE REQUIREMENTS OF THE CITED TECHNICAL
DATA IN ADDITION TO THE REQUIREMENTS OF THE
PART NUMBERED ITEM LISTED ON THIS SOLICITATION.
-
-
REFERENCE NUMBER E0114
-
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED-
ONLY ITEMS.
-
-
REFERENCE NUMBER CS001
-
THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO
EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA
AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED
THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE
DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO
INTERNATIONAL AGREEMENTS.
-
TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, "MILITARY
CRITICAL TECHNICAL DATA AGREEMENT," FORM IS AVAILABLE AT THE WORLD WIDE
WEB ADDRESS HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO:
-
DLA LOGISTICS INFORMATION SERVICE
FEDERAL CENTER
74 WASHINGTON AVE., NORTH
BATTLE CREEK, MI 49037-3084
-
TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A
CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT,
DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY
THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN
EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 "EXEMPTIONS OF
GENERAL APPLICABILITY," AND/OR EAR PART 740 ARE APPLICABLE.
-
NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL
DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN
APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO
RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA.
-
NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO
THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA
UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY
PERMITTED BY DODD 5230.25."
Pamela R. Baker, Contract Specialist, Phone 6146926629, Email [email protected] - Russell C. Edwards, Acquisition Specialist, Phone 614-692-8245, Email [email protected]
