Expansion Joint Repair
Mandatory pre-bid meeting 02/15/2010.
Work includes, but is not limited to, providing all labor, consumable materials (and other materials, as required), tools,
equipment, test equipment, and services required to perform expansion joint repair in Rich Computer at Georgia Tech.
Typically, the type of work to be performed is:
There are two expansion joints; 1) expansion joint at the structural slab. 2) expansion joint at the patio level. Each is about 95
lineal feet. Both needs to be removed and replaced per below scope of work. There is approximately 95 lineal feet of concrete
& joint at and along window to be removed and replaced as follows:
1. Remove concrete from control joints in to the expansion joint.
2. Remove existing leaking Jenne joint on both levels
3. Terminate the existing plaza expansion joint waterproofing.
