The RFP Database
New business relationships start here

Ergostat Prep/Pack Workstation Brandname or equal


Wisconsin, United States
Government : Federal
RFP
Go to the link
This document has expired, therefore the above link may no longer work.

This Sources Sought Notice is for informational and planning purposes only and shall not be construed as a solicitation or as an obligation or commitment by the Government at this time. This notice is intended strictly for market research. The purpose of this Sources Sought notice is to determine interest and capability of large businesses and small businesses, to include VIP-Verified Veteran-Owned Small Business (VOSB) and Service-Disabled Veteran-Owned Small Business (SDVOSB) prospective contractors relative to the North American Industry Classification System (NAICS) Code 337214 (Office Furniture Manufacturer (Non-Wood)).

The Prep/Pack Electronic Workstation, Ergostat, Deluxe Electric is known to meet the Government s needs.

The Government is requesting that responsible Large and Small Businesses, including SDVOSB and VOSB sources respond if it can provide the following items on a brand name or equal basis:
Line
Item No.
Description

Qty
Unit
0001
CG55
PREP/PACK WORKSTATION, ERGOSTAT, DELUXE ELECTRIC
1
EA
0002
CG00043
MAGNIFICATON LIGHT
1
EA
0003
PREP00033
SURFACE MOUNTED FLAT SCREEN ARM
1
EA
0004
PREP00045
FLAT SCREEN KEYBOARD MOUNT
1
EA
0005
CG00039
BLACK RUBBERMAID WASTE BASKET

1
EA
0006

CG00025
ERGO STAT 6 FOOT REST
1
EA
0007
CG00035
SPOOL HOLDER 36 INCH
7
EA
0008

CG00047
ERGO STAT 18in x 72in LOWER SHELF
7
EA
0009
SE115072
INSTALLATION OF CG63 DELUXE ERGOSTAT TABLE
1
EA


Salient Characteristics (DELUXE ELECTRIC ERGOSTAT WORKSTATION or EQUAL):

1. Height Adjustable worktable with a surface height range from 26 B= to 42 1/2
minimum.
2. Electric Adjustable-height workstation equipped with a 120 Volt, 50/60 Hz., 3.0/2.2
Amp motor.
3. Height control box with rocker switch or push button and 8 1/2' to 10' power cord.
4. Cantilevered frame design; Heavy-gauge steel or Aluminum frames with durable powder-coat paint surfaces
5. Stainless steel workstation top with seamwelded corners and vibration-damping solid
core; required to be stainless steel to provide protection to instruments and to prevent any flaking from applied covering getting onto the instruments.
6. 500 lb. minimum lift capacity
7. Outlet power bar that provides 6 to 8. single circuit, 15 Amp, 120 Volt outlets to include
a lighted on/off switch with circuit breaker protection surrounded by a built in safety
guard and an 8' power cord.
8. Casters with lockable wheels
9. Single 6 lockable Task Pull out Drawer, Suspended under table under work table
10. Each strip Light: Two - T8 lamps, 120 Volt, with batwing lens, and a 9' cord with rear
right hand exit.
11. Stainless steel table surface is 36 D x 72 L. Base is 39.69D x 72.98L.
12. Ref# CG55 Ergo stat Prep/Pack Workstation Deluxe Electric
13. Riser Frame
14. Riser Frame End Covers
15. Riser Spine
16. Cantilever Light Bracket
17. High Performance Task Light, 2 bulbs
18. Top shelf that runs the length of the workstation.
19. Spool holder.
20. Single (1) Bin Rail that runs half the length of the workstation and Five (5) Bins
21. Vertical CPU holder mounted under main work table surface
22. Magnetic White Board
23. Mounted Magnification Light
24. Sybiote Flat Screen Keyboard Mount
25. Waste Basket
26. Attached Foot Rest
27. Purchase to include assembly and Installation workstation table.

Interested vendors are required to submit an e-mail delineating:
Qualifications, capabilities, and experience for providing this product;
Business size/Socioeconomic status;
If the product is on the Federal Supply Schedule or the Open Market; and
Memo or correspondence which authorizes distributor to distribute the manufacturer s products.
This is not a Request for Quote/Proposal or an announcement of a solicitation and no solicitation package exists at this time. Your responses will be used solely for market research purposes of the Government. The Government will not pay for any materials provided in response to this notice and submissions will not be returned to the sender. VOSBs and SDVOSBs must be registered and verified in VIP for consideration.

The applicable North American Industry Classification System (NAICS) Code for this requirement is 337214 and the small business size standard is 500 employees. Responses due are to be submitted by e-mail to Jamila Nicholas at jamila.nicholas2@va.gov. The information requested must be received no later than 4:00pm Central Standard Time on Friday, September 22 , 2017.

Jamila D Nicholas
Contracting Officer
414-844-4830

jamila.nicholas2@va.gov

    1. Home
    2. Articles
    3. Login or Register

    4. Search

    5. Add/Announce your RFP