This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is KNOXUSARECG4-SJM0024 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2019-03. The associated North American Industrial Classification System (NAICS) code for this procurement is 337215 with a small business size standard of 500.00 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted and will end on 2019-07-22 11:00:00.0 Eastern Time or as otherwise displayed at www.UnisonMarketplace.com. FOB Destination shall be in the Special Shipping Instructions.The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: ****Pre-Production Sample ********
Provide a pre-production sample for the Requiring Activity to approve the quality of the artwork and printing prior to producing to remaining devices. (low resolution concept artwork attached) High resolution final copy will be provided after contract award.
Requirement for Double Sided Banner-Up Display Stands are as follows;
Brand name or equal to SilverWing Double Sided, (no MFR SKU.
Retractable Aluminum Base must be 36b long and 9b wide.
The color of the base must be Silver with Chrome ends.
The material for the banner has to be or equal to curl, tear and water resistant 13oz Vinyl and measures 33.5b to fit the display system that is being requested and 81b tall to allow an 80b message area for printing. The same message will go on both sides of the banner and the sample artwork is attached. (Final high resolution artwork will be provided at contract award)
The display stand must allow for the banner material to be changed with about a 1b border inside the base to where the current banner can be removed and a new banner be attached to where it retracts back into the base.
The banner stand, pole and any other items that come with the banner stand must fit inside of a travel padded carrying case.
The travel bag must be gray in color and have the following;
*An adjustable shoulder strap from end to end of the case.
*Must have a metal zipper about 64b and has two metal zipper ends so that you can zip from
each end and meet in the middle so as a lock can be used to secure the items inside the bag.
The carrying case must have Velco straps that are approximately 2" wide that will hold in the display stand from shifting around inside the case. *There will be 3 pockets inside the lid of the bag and run the length of the bag to store items such as the pole and any other items that are need to carry. Each pocket will have a Velcro closure to secure the items as not to shift.
*There will be 4 rounded rubber feet 1/2" diameter so the case can be placed on the side without falling over.
Each Stand/travel case must be packaged separately in a corrugated box of a minimum of 200 lb test and both ends are to be secured with tape so that during shipping the box is not damaged.
Transportation Company must coordinate with POC 48 hours before delivery is to be made. (delivery address list with POC information will be provided after contract award)
Provide inside delivery to:
HQ USAREC
Bldg 1307 3d Ave
ATTN: Ernie Bagley
G7/9 Room 2043-A
Fort Knox, KY 40121, 1, EA;LI 002: Requirement for Double Sided Banner-Up Display Stands are as follows;
Brand name or equal to SilverWing Double Sided, (no MFR SKU.
Retractable Aluminum Base must be 36b long and 9b wide.
The color of the base must be Silver with Chrome ends.
The material for the banner has to be or equal to curl, tear and water resistant 13oz Vinyl and measures 33.5b to fit the display system that is being requested and 81b tall to allow an 80b message area for printing. The same message will go on both sides of the banner and the sample artwork is attached. (Final high resolution artwork will be provided at contract award)
The display stand must allow for the banner material to be changed with about a 1b border inside the base to where the current banner can be removed and a new banner be attached to where it retracts back into the base.
The banner stand, pole and any other items that come with the banner stand must fit inside of a travel padded carrying case.
The travel bag must be gray in color and have the following;
*An adjustable shoulder strap from end to end of the case.
*Must have a metal zipper about 64b and has two metal zipper ends so that you can zip from
each end and meet in the middle so as a lock can be used to secure the items inside the bag.
The carrying case must have Velco straps that are approximately 2" wide that will hold in the display stand from shifting around inside the case. *There will be 3 pockets inside the lid of the bag and run the length of the bag to store items such as the pole and any other items that are need to carry. Each pocket will have a Velcro closure to secure the items as not to shift.
*There will be 4 rounded rubber feet 1/2" diameter so the case can be placed on the side without falling over.
Each Stand/travel case must be packaged separately in a corrugated box of a minimum of 200 lb test and both ends are to be secured with tape so that during shipping the box is not damaged.
Transportation Company must coordinate with POC 48 hours before delivery is to be made. (delivery address list with POC information will be provided after contract award)
Provide inside delivery to:
US Army Albany Recruiting BN
1 Buffington St, Bldg 25
Watervliet, NY 12189, 40, EA;LI 003: Requirement for Double Sided Banner-Up Display Stands are as follows;
Brand name or equal to SilverWing Double Sided, (no MFR SKU.
Retractable Aluminum Base must be 36b long and 9b wide.
The color of the base must be Silver with Chrome ends.
The material for the banner has to be or equal to curl, tear and water resistant 13oz Vinyl and measures 33.5b to fit the display system that is being requested and 81b tall to allow an 80b message area for printing. The same message will go on both sides of the banner and the sample artwork is attached. (Final high resolution artwork will be provided at contract award)
The display stand must allow for the banner material to be changed with about a 1b border inside the base to where the current banner can be removed and a new banner be attached to where it retracts back into the base.
The banner stand, pole and any other items that come with the banner stand must fit inside of a travel padded carrying case.
The travel bag must be gray in color and have the following;
*An adjustable shoulder strap from end to end of the case.
*Must have a metal zipper about 64b and has two metal zipper ends so that you can zip from
each end and meet in the middle so as a lock can be used to secure the items inside the bag.
The carrying case must have Velco straps that are approximately 2" wide that will hold in the display stand from shifting around inside the case. *There will be 3 pockets inside the lid of the bag and run the length of the bag to store items such as the pole and any other items that are need to carry. Each pocket will have a Velcro closure to secure the items as not to shift.
*There will be 4 rounded rubber feet 1/2" diameter so the case can be placed on the side without falling over.
Each Stand/travel case must be packaged separately in a corrugated box of a minimum of 200 lb test and both ends are to be secured with tape so that during shipping the box is not damaged.
Transportation Company must coordinate with POC 48 hours before delivery is to be made. (delivery address list with POC information will be provided after contract award)
Provide inside delivery to:
Europe Recruiting Detachment 1A8
US ARMY RECRUITING DET
BLDG 3213, RM 205/206
KLEBER KASERNE
KAISERSLAUTERN, GE 67663
(Army Recruiting
CMR 469
APO AE 09227), 4, EA;LI 004: Requirement for Double Sided Banner-Up Display Stands are as follows;
Brand name or equal to SilverWing Double Sided, (no MFR SKU.
Retractable Aluminum Base must be 36b long and 9b wide.
The color of the base must be Silver with Chrome ends.
The material for the banner has to be or equal to curl, tear and water resistant 13oz Vinyl and measures 33.5b to fit the display system that is being requested and 81b tall to allow an 80b message area for printing. The same message will go on both sides of the banner and the sample artwork is attached. (Final high resolution artwork will be provided at contract award)
The display stand must allow for the banner material to be changed with about a 1b border inside the base to where the current banner can be removed and a new banner be attached to where it retracts back into the base.
The banner stand, pole and any other items that come with the banner stand must fit inside of a travel padded carrying case.
The travel bag must be gray in color and have the following;
*An adjustable shoulder strap from end to end of the case.
*Must have a metal zipper about 64b and has two metal zipper ends so that you can zip from
each end and meet in the middle so as a lock can be used to secure the items inside the bag.
The carrying case must have Velco straps that are approximately 2" wide that will hold in the display stand from shifting around inside the case. *There will be 3 pockets inside the lid of the bag and run the length of the bag to store items such as the pole and any other items that are need to carry. Each pocket will have a Velcro closure to secure the items as not to shift.
*There will be 4 rounded rubber feet 1/2" diameter so the case can be placed on the side without falling over.
Each Stand/travel case must be packaged separately in a corrugated box of a minimum of 200 lb test and both ends are to be secured with tape so that during shipping the box is not damaged.
Transportation Company must coordinate with POC 48 hours before delivery is to be made. (delivery address list with POC information will be provided after contract award)
Provide inside delivery to:
US Army Baltimore Recruiting BN
4550 Parade Field Lane
Fort George G. Meade, MD 20755-7810, 36, EA;LI 005: Requirement for Double Sided Banner-Up Display Stands are as follows;
Brand name or equal to SilverWing Double Sided, (no MFR SKU.
Retractable Aluminum Base must be 36b long and 9b wide.
The color of the base must be Silver with Chrome ends.
The material for the banner has to be or equal to curl, tear and water resistant 13oz Vinyl and measures 33.5b to fit the display system that is being requested and 81b tall to allow an 80b message area for printing. The same message will go on both sides of the banner and the sample artwork is attached. (Final high resolution artwork will be provided at contract award)
The display stand must allow for the banner material to be changed with about a 1b border inside the base to where the current banner can be removed and a new banner be attached to where it retracts back into the base.
The banner stand, pole and any other items that come with the banner stand must fit inside of a travel padded carrying case.
The travel bag must be gray in color and have the following;
*An adjustable shoulder strap from end to end of the case.
*Must have a metal zipper about 64b and has two metal zipper ends so that you can zip from
each end and meet in the middle so as a lock can be used to secure the items inside the bag.
The carrying case must have Velco straps that are approximately 2" wide that will hold in the display stand from shifting around inside the case. *There will be 3 pockets inside the lid of the bag and run the length of the bag to store items such as the pole and any other items that are need to carry. Each pocket will have a Velcro closure to secure the items as not to shift.
*There will be 4 rounded rubber feet 1/2" diameter so the case can be placed on the side without falling over.
Each Stand/travel case must be packaged separately in a corrugated box of a minimum of 200 lb test and both ends are to be secured with tape so that during shipping the box is not damaged.
Transportation Company must coordinate with POC 48 hours before delivery is to be made. (delivery address list with POC information will be provided after contract award)
Provide inside delivery to:
US Army Beckley Recruiting BN
21 Mallard Court
Beckley, WV 25801-3615, 36, EA;LI 006: Requirement for Double Sided Banner-Up Display Stands are as follows;
Brand name or equal to SilverWing Double Sided, (no MFR SKU.
Retractable Aluminum Base must be 36b long and 9b wide.
The color of the base must be Silver with Chrome ends.
The material for the banner has to be or equal to curl, tear and water resistant 13oz Vinyl and measures 33.5b to fit the display system that is being requested and 81b tall to allow an 80b message area for printing. The same message will go on both sides of the banner and the sample artwork is attached. (Final high resolution artwork will be provided at contract award)
The display stand must allow for the banner material to be changed with about a 1b border inside the base to where the current banner can be removed and a new banner be attached to where it retracts back into the base.
The banner stand, pole and any other items that come with the banner stand must fit inside of a travel padded carrying case.
The travel bag must be gray in color and have the following;
*An adjustable shoulder strap from end to end of the case.
*Must have a metal zipper about 64b and has two metal zipper ends so that you can zip from
each end and meet in the middle so as a lock can be used to secure the items inside the bag.
The carrying case must have Velco straps that are approximately 2" wide that will hold in the display stand from shifting around inside the case. *There will be 3 pockets inside the lid of the bag and run the length of the bag to store items such as the pole and any other items that are need to carry. Each pocket will have a Velcro closure to secure the items as not to shift.
*There will be 4 rounded rubber feet 1/2" diameter so the case can be placed on the side without falling over.
Each Stand/travel case must be packaged separately in a corrugated box of a minimum of 200 lb test and both ends are to be secured with tape so that during shipping the box is not damaged.
Transportation Company must coordinate with POC 48 hours before delivery is to be made. (delivery address list with POC information will be provided after contract award)
Provide inside delivery to:
US Army Harrisburg Recruiting BN
Bldg 54 M Street, STE 11
New Cumberland, PA 17070, 36, EA;LI 007: Requirement for Double Sided Banner-Up Display Stands are as follows;
Brand name or equal to SilverWing Double Sided, (no MFR SKU.
Retractable Aluminum Base must be 36b long and 9b wide.
The color of the base must be Silver with Chrome ends.
The material for the banner has to be or equal to curl, tear and water resistant 13oz Vinyl and measures 33.5b to fit the display system that is being requested and 81b tall to allow an 80b message area for printing. The same message will go on both sides of the banner and the sample artwork is attached. (Final high resolution artwork will be provided at contract award)
The display stand must allow for the banner material to be changed with about a 1b border inside the base to where the current banner can be removed and a new banner be attached to where it retracts back into the base.
The banner stand, pole and any other items that come with the banner stand must fit inside of a travel padded carrying case.
The travel bag must be gray in color and have the following;
*An adjustable shoulder strap from end to end of the case.
*Must have a metal zipper about 64b and has two metal zipper ends so that you can zip from
each end and meet in the middle so as a lock can be used to secure the items inside the bag.
The carrying case must have Velco straps that are approximately 2" wide that will hold in the display stand from shifting around inside the case. *There will be 3 pockets inside the lid of the bag and run the length of the bag to store items such as the pole and any other items that are need to carry. Each pocket will have a Velcro closure to secure the items as not to shift.
*There will be 4 rounded rubber feet 1/2" diameter so the case can be placed on the side without falling over.
Each Stand/travel case must be packaged separately in a corrugated box of a minimum of 200 lb test and both ends are to be secured with tape so that during shipping the box is not damaged.
Transportation Company must coordinate with POC 48 hours before delivery is to be made. (delivery address list with POC information will be provided after contract award)
Provide inside delivery to:
US Army Mid-Atlantic Recruiting BN
Naval Air Engineering Station
Highway 547, Building 688
Lakehurst, NJ 08733, 36, EA;LI 008: Requirement for Double Sided Banner-Up Display Stands are as follows;
Brand name or equal to SilverWing Double Sided, (no MFR SKU.
Retractable Aluminum Base must be 36b long and 9b wide.
The color of the base must be Silver with Chrome ends.
The material for the banner has to be or equal to curl, tear and water resistant 13oz Vinyl and measures 33.5b to fit the display system that is being requested and 81b tall to allow an 80b message area for printing. The same message will go on both sides of the banner and the sample artwork is attached. (Final high resolution artwork will be provided at contract award)
The display stand must allow for the banner material to be changed with about a 1b border inside the base to where the current banner can be removed and a new banner be attached to where it retracts back into the base.
The banner stand, pole and any other items that come with the banner stand must fit inside of a travel padded carrying case.
The travel bag must be gray in color and have the following;
*An adjustable shoulder strap from end to end of the case.
*Must have a metal zipper about 64b and has two metal zipper ends so that you can zip from
each end and meet in the middle so as a lock can be used to secure the items inside the bag.
The carrying case must have Velco straps that are approximately 2" wide that will hold in the display stand from shifting around inside the case. *There will be 3 pockets inside the lid of the bag and run the length of the bag to store items such as the pole and any other items that are need to carry. Each pocket will have a Velcro closure to secure the items as not to shift.
*There will be 4 rounded rubber feet 1/2" diameter so the case can be placed on the side without falling over.
Each Stand/travel case must be packaged separately in a corrugated box of a minimum of 200 lb test and both ends are to be secured with tape so that during shipping the box is not damaged.
Transportation Company must coordinate with POC 48 hours before delivery is to be made. (delivery address list with POC information will be provided after contract award)
Provide inside delivery to:
US Army New England Recruiting BN
33 Canam Drive
Topsham, ME 04086-1117, 36, EA;LI 009: Requirement for Double Sided Banner-Up Display Stands are as follows;
Brand name or equal to SilverWing Double Sided, (no MFR SKU.
Retractable Aluminum Base must be 36b long and 9b wide.
The color of the base must be Silver with Chrome ends.
The material for the banner has to be or equal to curl, tear and water resistant 13oz Vinyl and measures 33.5b to fit the display system that is being requested and 81b tall to allow an 80b message area for printing. The same message will go on both sides of the banner and the sample artwork is attached. (Final high resolution artwork will be provided at contract award)
The display stand must allow for the banner material to be changed with about a 1b border inside the base to where the current banner can be removed and a new banner be attached to where it retracts back into the base.
The banner stand, pole and any other items that come with the banner stand must fit inside of a travel padded carrying case.
The travel bag must be gray in color and have the following;
*An adjustable shoulder strap from end to end of the case.
*Must have a metal zipper about 64b and has two metal zipper ends so that you can zip from
each end and meet in the middle so as a lock can be used to secure the items inside the bag.
The carrying case must have Velco straps that are approximately 2" wide that will hold in the display stand from shifting around inside the case. *There will be 3 pockets inside the lid of the bag and run the length of the bag to store items such as the pole and any other items that are need to carry. Each pocket will have a Velcro closure to secure the items as not to shift.
*There will be 4 rounded rubber feet 1/2" diameter so the case can be placed on the side without falling over.
Each Stand/travel case must be packaged separately in a corrugated box of a minimum of 200 lb test and both ends are to be secured with tape so that during shipping the box is not damaged.
Transportation Company must coordinate with POC 48 hours before delivery is to be made. (delivery address list with POC information will be provided after contract award)
Provide inside delivery to:
US Army New York City Recruiting BN
NYAC & Fort Hamilton
Building 111 Battery Avenue, Room 105
Brooklyn, NY 11252-7000, 36, EA;LI 010: Requirement for Double Sided Banner-Up Display Stands are as follows;
Brand name or equal to SilverWing Double Sided, (no MFR SKU.
Retractable Aluminum Base must be 36b long and 9b wide.
The color of the base must be Silver with Chrome ends.
The material for the banner has to be or equal to curl, tear and water resistant 13oz Vinyl and measures 33.5b to fit the display system that is being requested and 81b tall to allow an 80b message area for printing. The same message will go on both sides of the banner and the sample artwork is attached. (Final high resolution artwork will be provided at contract award)
The display stand must allow for the banner material to be changed with about a 1b border inside the base to where the current banner can be removed and a new banner be attached to where it retracts back into the base.
The banner stand, pole and any other items that come with the banner stand must fit inside of a travel padded carrying case.
The travel bag must be gray in color and have the following;
*An adjustable shoulder strap from end to end of the case.
*Must have a metal zipper about 64b and has two metal zipper ends so that you can zip from
each end and meet in the middle so as a lock can be used to secure the items inside the bag.
The carrying case must have Velco straps that are approximately 2" wide that will hold in the display stand from shifting around inside the case. *There will be 3 pockets inside the lid of the bag and run the length of the bag to store items such as the pole and any other items that are need to carry. Each pocket will have a Velcro closure to secure the items as not to shift.
*There will be 4 rounded rubber feet 1/2" diameter so the case can be placed on the side without falling over.
Each Stand/travel case must be packaged separately in a corrugated box of a minimum of 200 lb test and both ends are to be secured with tape so that during shipping the box is not damaged.
Transportation Company must coordinate with POC 48 hours before delivery is to be made. (delivery address list with POC information will be provided after contract award)
Provide inside delivery to:
US Army Syracuse Recruiting BN
2 Clinton SQ STE 230
Syracuse, NY 13202-1042, 36, EA;LI 011: Requirement for Double Sided Banner-Up Display Stands are as follows;
Brand name or equal to SilverWing Double Sided, (no MFR SKU.
Retractable Aluminum Base must be 36b long and 9b wide.
The color of the base must be Silver with Chrome ends.
The material for the banner has to be or equal to curl, tear and water resistant 13oz Vinyl and measures 33.5b to fit the display system that is being requested and 81b tall to allow an 80b message area for printing. The same message will go on both sides of the banner and the sample artwork is attached. (Final high resolution artwork will be provided at contract award)
The display stand must allow for the banner material to be changed with about a 1b border inside the base to where the current banner can be removed and a new banner be attached to where it retracts back into the base.
The banner stand, pole and any other items that come with the banner stand must fit inside of a travel padded carrying case.
The travel bag must be gray in color and have the following;
*An adjustable shoulder strap from end to end of the case.
*Must have a metal zipper about 64b and has two metal zipper ends so that you can zip from
each end and meet in the middle so as a lock can be used to secure the items inside the bag.
The carrying case must have Velco straps that are approximately 2" wide that will hold in the display stand from shifting around inside the case. *There will be 3 pockets inside the lid of the bag and run the length of the bag to store items such as the pole and any other items that are need to carry. Each pocket will have a Velcro closure to secure the items as not to shift.
*There will be 4 rounded rubber feet 1/2" diameter so the case can be placed on the side without falling over.
Each Stand/travel case must be packaged separately in a corrugated box of a minimum of 200 lb test and both ends are to be secured with tape so that during shipping the box is not damaged.
Transportation Company must coordinate with POC 48 hours before delivery is to be made. (delivery address list with POC information will be provided after contract award)
Provide inside delivery to:
US Army Atlanta Recruiting Bn
2400 Herodian Way
The Atrium, Suite 490
Smyrna, GA 30080-8500, 35, EA;LI 012: Requirement for Double Sided Banner-Up Display Stands are as follows;
Brand name or equal to SilverWing Double Sided, (no MFR SKU.
Retractable Aluminum Base must be 36b long and 9b wide.
The color of the base must be Silver with Chrome ends.
The material for the banner has to be or equal to curl, tear and water resistant 13oz Vinyl and measures 33.5b to fit the display system that is being requested and 81b tall to allow an 80b message area for printing. The same message will go on both sides of the banner and the sample artwork is attached. (Final high resolution artwork will be provided at contract award)
The display stand must allow for the banner material to be changed with about a 1b border inside the base to where the current banner can be removed and a new banner be attached to where it retracts back into the base.
The banner stand, pole and any other items that come with the banner stand must fit inside of a travel padded carrying case.
The travel bag must be gray in color and have the following;
*An adjustable shoulder strap from end to end of the case.
*Must have a metal zipper about 64b and has two metal zipper ends so that you can zip from
each end and meet in the middle so as a lock can be used to secure the items inside the bag.
The carrying case must have Velco straps that are approximately 2" wide that will hold in the display stand from shifting around inside the case. *There will be 3 pockets inside the lid of the bag and run the length of the bag to store items such as the pole and any other items that are need to carry. Each pocket will have a Velcro closure to secure the items as not to shift.
*There will be 4 rounded rubber feet 1/2" diameter so the case can be placed on the side without falling over.
Each Stand/travel case must be packaged separately in a corrugated box of a minimum of 200 lb test and both ends are to be secured with tape so that during shipping the box is not damaged.
Transportation Company must coordinate with POC 48 hours before delivery is to be made. (delivery address list with POC information will be provided after contract award)
Provide inside delivery to:
US Army Baton Rouge Recruting BN
10101 Park Rowe Ave., STE 575
Baton Rouge, LA 70810, 39, EA;LI 013: Requirement for Double Sided Banner-Up Display Stands are as follows;
Brand name or equal to SilverWing Double Sided, (no MFR SKU.
Retractable Aluminum Base must be 36b long and 9b wide.
The color of the base must be Silver with Chrome ends.
The material for the banner has to be or equal to curl, tear and water resistant 13oz Vinyl and measures 33.5b to fit the display system that is being requested and 81b tall to allow an 80b message area for printing. The same message will go on both sides of the banner and the sample artwork is attached. (Final high resolution artwork will be provided at contract award)
The display stand must allow for the banner material to be changed with about a 1b border inside the base to where the current banner can be removed and a new banner be attached to where it retracts back into the base.
The banner stand, pole and any other items that come with the banner stand must fit inside of a travel padded carrying case.
The travel bag must be gray in color and have the following;
*An adjustable shoulder strap from end to end of the case.
*Must have a metal zipper about 64b and has two metal zipper ends so that you can zip from
each end and meet in the middle so as a lock can be used to secure the items inside the bag.
The carrying case must have Velco straps that are approximately 2" wide that will hold in the display stand from shifting around inside the case. *There will be 3 pockets inside the lid of the bag and run the length of the bag to store items such as the pole and any other items that are need to carry. Each pocket will have a Velcro closure to secure the items as not to shift.
*There will be 4 rounded rubber feet 1/2" diameter so the case can be placed on the side without falling over.
Each Stand/travel case must be packaged separately in a corrugated box of a minimum of 200 lb test and both ends are to be secured with tape so that during shipping the box is not damaged.
Transportation Company must coordinate with POC 48 hours before delivery is to be made. (delivery address list with POC information will be provided after contract award)
Provide inside delivery to:
US Army Columbia Recruiting Bn
Strom Thurman Federal Building
1835 Assembly Street
Columbia, SC 29201-2430, 30, EA;LI 014: Requirement for Double Sided Banner-Up Display Stands are as follows;
Brand name or equal to SilverWing Double Sided, (no MFR SKU.
Retractable Aluminum Base must be 36b long and 9b wide.
The color of the base must be Silver with Chrome ends.
The material for the banner has to be or equal to curl, tear and water resistant 13oz Vinyl and measures 33.5b to fit the display system that is being requested and 81b tall to allow an 80b message area for printing. The same message will go on both sides of the banner and the sample artwork is attached. (Final high resolution artwork will be provided at contract award)
The display stand must allow for the banner material to be changed with about a 1b border inside the base to where the current banner can be removed and a new banner be attached to where it retracts back into the base.
The banner stand, pole and any other items that come with the banner stand must fit inside of a travel padded carrying case.
The travel bag must be gray in color and have the following;
*An adjustable shoulder strap from end to end of the case.
*Must have a metal zipper about 64b and has two metal zipper ends so that you can zip from
each end and meet in the middle so as a lock can be used to secure the items inside the bag.
The carrying case must have Velco straps that are approximately 2" wide that will hold in the display stand from shifting around inside the case. *There will be 3 pockets inside the lid of the bag and run the length of the bag to store items such as the pole and any other items that are need to carry. Each pocket will have a Velcro closure to secure the items as not to shift.
*There will be 4 rounded rubber feet 1/2" diameter so the case can be placed on the side without falling over.
Each Stand/travel case must be packaged separately in a corrugated box of a minimum of 200 lb test and both ends are to be secured with tape so that during shipping the box is not damaged.
Transportation Company must coordinate with POC 48 hours before delivery is to be made. (delivery address list with POC information will be provided after contract award)
Provide inside delivery to:
US Army Jacksonville Recruiting Bn
1851 Executive Center
Suite 130 Ribault Building
Jacksonville, FL 32207-2350, 24, EA;LI 015: Requirement for Double Sided Banner-Up Display Stands are as follows;
Brand name or equal to SilverWing Double Sided, (no MFR SKU.
Retractable Aluminum Base must be 36b long and 9b wide.
The color of the base must be Silver with Chrome ends.
The material for the banner has to be or equal to curl, tear and water resistant 13oz Vinyl and measures 33.5b to fit the display system that is being requested and 81b tall to allow an 80b message area for printing. The same message will go on both sides of the banner and the sample artwork is attached. (Final high resolution artwork will be provided at contract award)
The display stand must allow for the banner material to be changed with about a 1b border inside the base to where the current banner can be removed and a new banner be attached to where it retracts back into the base.
The banner stand, pole and any other items that come with the banner stand must fit inside of a travel padded carrying case.
The travel bag must be gray in color and have the following;
*An adjustable shoulder strap from end to end of the case.
*Must have a metal zipper about 64b and has two metal zipper ends so that you can zip from
each end and meet in the middle so as a lock can be used to secure the items inside the bag.
The carrying case must have Velco straps that are approximately 2" wide that will hold in the display stand from shifting around inside the case. *There will be 3 pockets inside the lid of the bag and run the length of the bag to store items such as the pole and any other items that are need to carry. Each pocket will have a Velcro closure to secure the items as not to shift.
*There will be 4 rounded rubber feet 1/2" diameter so the case can be placed on the side without falling over.
Each Stand/travel case must be packaged separately in a corrugated box of a minimum of 200 lb test and both ends are to be secured with tape so that during shipping the box is not damaged.
Transportation Company must coordinate with POC 48 hours before delivery is to be made. (delivery address list with POC information will be provided after contract award)
Provide inside delivery to:
US Army Miami Recruiting Bn
8685 NW 53rd Terrace
Augusta Bldg, Suite 200
Miami, FL 33166-4611, 32, EA;LI 016: Requirement for Double Sided Banner-Up Display Stands are as follows;
Brand name or equal to SilverWing Double Sided, (no MFR SKU.
Retractable Aluminum Base must be 36b long and 9b wide.
The color of the base must be Silver with Chrome ends.
The material for the banner has to be or equal to curl, tear and water resistant 13oz Vinyl and measures 33.5b to fit the display system that is being requested and 81b tall to allow an 80b message area for printing. The same message will go on both sides of the banner and the sample artwork is attached. (Final high resolution artwork will be provided at contract award)
The display stand must allow for the banner material to be changed with about a 1b border inside the base to where the current banner can be removed and a new banner be attached to where it retracts back into the base.
The banner stand, pole and any other items that come with the banner stand must fit inside of a travel padded carrying case.
The travel bag must be gray in color and have the following;
*An adjustable shoulder strap from end to end of the case.
*Must have a metal zipper about 64b and has two metal zipper ends so that you can zip from
each end and meet in the middle so as a lock can be used to secure the items inside the bag.
The carrying case must have Velco straps that are approximately 2" wide that will hold in the display stand from shifting around inside the case. *There will be 3 pockets inside the lid of the bag and run the length of the bag to store items such as the pole and any other items that are need to carry. Each pocket will have a Velcro closure to secure the items as not to shift.
*There will be 4 rounded rubber feet 1/2" diameter so the case can be placed on the side without falling over.
Each Stand/travel case must be packaged separately in a corrugated box of a minimum of 200 lb test and both ends are to be secured with tape so that during shipping the box is not damaged.
Transportation Company must coordinate with POC 48 hours before delivery is to be made. (delivery address list with POC information will be provided after contract award)
Provide inside delivery to:
US Army San Juan Recruiting Company
Buchananan Office Center, STE 110
Guaynabo, PR 00968, 4, EA;LI 017: Requirement for Double Sided Banner-Up Display Stands are as follows;
Brand name or equal to SilverWing Double Sided, (no MFR SKU.
Retractable Aluminum Base must be 36b long and 9b wide.
The color of the base must be Silver with Chrome ends.
The material for the banner has to be or equal to curl, tear and water resistant 13oz Vinyl and measures 33.5b to fit the display system that is being requested and 81b tall to allow an 80b message area for printing. The same message will go on both sides of the banner and the sample artwork is attached. (Final high resolution artwork will be provided at contract award)
The display stand must allow for the banner material to be changed with about a 1b border inside the base to where the current banner can be removed and a new banner be attached to where it retracts back into the base.
The banner stand, pole and any other items that come with the banner stand must fit inside of a travel padded carrying case.
The travel bag must be gray in color and have the following;
*An adjustable shoulder strap from end to end of the case.
*Must have a metal zipper about 64b and has two metal zipper ends so that you can zip from
each end and meet in the middle so as a lock can be used to secure the items inside the bag.
The carrying case must have Velco straps that are approximately 2" wide that will hold in the display stand from shifting around inside the case. *There will be 3 pockets inside the lid of the bag and run the length of the bag to store items such as the pole and any other items that are need to carry. Each pocket will have a Velcro closure to secure the items as not to shift.
*There will be 4 rounded rubber feet 1/2" diameter so the case can be placed on the side without falling over.
Each Stand/travel case must be packaged separately in a corrugated box of a minimum of 200 lb test and both ends are to be secured with tape so that during shipping the box is not damaged.
Transportation Company must coordinate with POC 48 hours before delivery is to be made. (delivery address list with POC information will be provided after contract award)
Provide inside delivery to:
US Army Montgomery Recruiting Bn
775 McDonald Street
Building 1510
Gunter AFB, AL 36114, 32, EA;LI 018: Requirement for Double Sided Banner-Up Display Stands are as follows;
Brand name or equal to SilverWing Double Sided, (no MFR SKU.
Retractable Aluminum Base must be 36b long and 9b wide.
The color of the base must be Silver with Chrome ends.
The material for the banner has to be or equal to curl, tear and water resistant 13oz Vinyl and measures 33.5b to fit the display system that is being requested and 81b tall to allow an 80b message area for printing. The same message will go on both sides of the banner and the sample artwork is attached. (Final high resolution artwork will be provided at contract award)
The display stand must allow for the banner material to be changed with about a 1b border inside the base to where the current banner can be removed and a new banner be attached to where it retracts back into the base.
The banner stand, pole and any other items that come with the banner stand must fit inside of a travel padded carrying case.
The travel bag must be gray in color and have the following;
*An adjustable shoulder strap from end to end of the case.
*Must have a metal zipper about 64b and has two metal zipper ends so that you can zip from
each end and meet in the middle so as a lock can be used to secure the items inside the bag.
The carrying case must have Velco straps that are approximately 2" wide that will hold in the display stand from shifting around inside the case. *There will be 3 pockets inside the lid of the bag and run the length of the bag to store items such as the pole and any other items that are need to carry. Each pocket will have a Velcro closure to secure the items as not to shift.
*There will be 4 rounded rubber feet 1/2" diameter so the case can be placed on the side without falling over.
Each Stand/travel case must be packaged separately in a corrugated box of a minimum of 200 lb test and both ends are to be secured with tape so that during shipping the box is not damaged.
Transportation Company must coordinate with POC 48 hours before delivery is to be made. (delivery address list with POC information will be provided after contract award)
Provide inside delivery to:
US Army Raleigh Recruiting Bn
3117 Poplarwood Court
Cypress Bldg, Suite 218
Raleigh, NC 27604-1041, 39, EA;LI 019: Requirement for Double Sided Banner-Up Display Stands are as follows;
Brand name or equal to SilverWing Double Sided, (no MFR SKU.
Retractable Aluminum Base must be 36b long and 9b wide.
The color of the base must be Silver with Chrome ends.
The material for the banner has to be or equal to curl, tear and water resistant 13oz Vinyl and measures 33.5b to fit the display system that is being requested and 81b tall to allow an 80b message area for printing. The same message will go on both sides of the banner and the sample artwork is attached. (Final high resolution artwork will be provided at contract award)
The display stand must allow for the banner material to be changed with about a 1b border inside the base to where the current banner can be removed and a new banner be attached to where it retracts back into the base.
The banner stand, pole and any other items that come with the banner stand must fit inside of a travel padded carrying case.
The travel bag must be gray in color and have the following;
*An adjustable shoulder strap from end to end of the case.
*Must have a metal zipper about 64b and has two metal zipper ends so that you can zip from
each end and meet in the middle so as a lock can be used to secure the items inside the bag.
The carrying case must have Velco straps that are approximately 2" wide that will hold in the display stand from shifting around inside the case. *There will be 3 pockets inside the lid of the bag and run the length of the bag to store items such as the pole and any other items that are need to carry. Each pocket will have a Velcro closure to secure the items as not to shift.
*There will be 4 rounded rubber feet 1/2" diameter so the case can be placed on the side without falling over.
Each Stand/travel case must be packaged separately in a corrugated box of a minimum of 200 lb test and both ends are to be secured with tape so that during shipping the box is not damaged.
Transportation Company must coordinate with POC 48 hours before delivery is to be made. (delivery address list with POC information will be provided after contract award)
Provide inside delivery to:
US Army Tampa Recruiting Bn
3350 Buschwood Park Drive
Suite 140
Tampa, FL 33618-4312, 28, EA;LI 020: Requirement for Double Sided Banner-Up Display Stands are as follows;
Brand name or equal to SilverWing Double Sided, (no MFR SKU.
Retractable Aluminum Base must be 36b long and 9b wide.
The color of the base must be Silver with Chrome ends.
The material for the banner has to be or equal to curl, tear and water resistant 13oz Vinyl and measures 33.5b to fit the display system that is being requested and 81b tall to allow an 80b message area for printing. The same message will go on both sides of the banner and the sample artwork is attached. (Final high resolution artwork will be provided at contract award)
The display stand must allow for the banner material to be changed with about a 1b border inside the base to where the current banner can be removed and a new banner be attached to where it retracts back into the base.
The banner stand, pole and any other items that come with the banner stand must fit inside of a travel padded carrying case.
The travel bag must be gray in color and have the following;
*An adjustable shoulder strap from end to end of the case.
*Must have a metal zipper about 64b and has two metal zipper ends so that you can zip from
each end and meet in the middle so as a lock can be used to secure the items inside the bag.
The carrying case must have Velco straps that are approximately 2" wide that will hold in the display stand from shifting around inside the case. *There will be 3 pockets inside the lid of the bag and run the length of the bag to store items such as the pole and any other items that are need to carry. Each pocket will have a Velcro closure to secure the items as not to shift.
*There will be 4 rounded rubber feet 1/2" diameter so the case can be placed on the side without falling over.
Each Stand/travel case must be packaged separately in a corrugated box of a minimum of 200 lb test and both ends are to be secured with tape so that during shipping the box is not damaged.
Transportation Company must coordinate with POC 48 hours before delivery is to be made. (delivery address list with POC information will be provided after contract award)
Provide inside delivery to:
US Army Chicago Recruiting Bn
3202 Mississippi Street
Building 3215, Room 123
Great Lakes Naval Station, IL 60088, 36, EA;LI 021: Requirement for Double Sided Banner-Up Display Stands are as follows;
Brand name or equal to SilverWing Double Sided, (no MFR SKU.
Retractable Aluminum Base must be 36b long and 9b wide.
The color of the base must be Silver with Chrome ends.
The material for the banner has to be or equal to curl, tear and water resistant 13oz Vinyl and measures 33.5b to fit the display system that is being requested and 81b tall to allow an 80b message area for printing. The same message will go on both sides of the banner and the sample artwork is attached. (Final high resolution artwork will be provided at contract award)
The display stand must allow for the banner material to be changed with about a 1b border inside the base to where the current banner can be removed and a new banner be attached to where it retracts back into the base.
The banner stand, pole and any other items that come with the banner stand must fit inside of a travel padded carrying case.
The travel bag must be gray in color and have the following;
*An adjustable shoulder strap from end to end of the case.
*Must have a metal zipper about 64b and has two metal zipper ends so that you can zip from
each end and meet in the middle so as a lock can be used to secure the items inside the bag.
The carrying case must have Velco straps that are approximately 2" wide that will hold in the display stand from shifting around inside the case. *There will be 3 pockets inside the lid of the bag and run the length of the bag to store items such as the pole and any other items that are need to carry. Each pocket will have a Velcro closure to secure the items as not to shift.
*There will be 4 rounded rubber feet 1/2" diameter so the case can be placed on the side without falling over.
Each Stand/travel case must be packaged separately in a corrugated box of a minimum of 200 lb test and both ends are to be secured with tape so that during shipping the box is not damaged.
Transportation Company must coordinate with POC 48 hours before delivery is to be made. (delivery address list with POC information will be provided after contract award)
Provide inside delivery to:
US Army Cleveland Recruiting Bn
1350 Euclid Avenue
Suite 1000
Cleveland, OH 44115, 36, EA;LI 022: Requirement for Double Sided Banner-Up Display Stands are as follows;
Brand name or equal to SilverWing Double Sided, (no MFR SKU.
Retractable Aluminum Base must be 36b long and 9b wide.
The color of the base must be Silver with Chrome ends.
The material for the banner has to be or equal to curl, tear and water resistant 13oz Vinyl and measures 33.5b to fit the display system that is being requested and 81b tall to allow an 80b message area for printing. The same message will go on both sides of the banner and the sample artwork is attached. (Final high resolution artwork will be provided at contract award)
The display stand must allow for the banner material to be changed with about a 1b border inside the base to where the current banner can be removed and a new banner be attached to where it retracts back into the base.
The banner stand, pole and any other items that come with the banner stand must fit inside of a travel padded carrying case.
The travel bag must be gray in color and have the following;
*An adjustable shoulder strap from end to end of the case.
*Must have a metal zipper about 64b and has two metal zipper ends so that you can zip from
each end and meet in the middle so as a lock can be used to secure the items inside the bag.
The carrying case must have Velco straps that are approximately 2" wide that will hold in the display stand from shifting around inside the case. *There will be 3 pockets inside the lid of the bag and run the length of the bag to store items such as the pole and any other items that are need to carry. Each pocket will have a Velcro closure to secure the items as not to shift.
*There will be 4 rounded rubber feet 1/2" diameter so the case can be placed on the side without falling over.
Each Stand/travel case must be packaged separately in a corrugated box of a minimum of 200 lb test and both ends are to be secured with tape so that during shipping the box is not damaged.
Transportation Company must coordinate with POC 48 hours before delivery is to be made. (delivery address list with POC information will be provided after contract award)
Provide inside delivery to:
US Army Columbus Recruiting Bn
300 North James Road,
BLDG 11 Section 10
Whitehall, OH 43213, 33, EA;LI 023: Requirement for Double Sided Banner-Up Display Stands are as follows;
Brand name or equal to SilverWing Double Sided, (no MFR SKU.
Retractable Aluminum Base must be 36b long and 9b wide.
The color of the base must be Silver with Chrome ends.
The material for the banner has to be or equal to curl, tear and water resistant 13oz Vinyl and measures 33.5b to fit the display system that is being requested and 81b tall to allow an 80b message area for printing. The same message will go on both sides of the banner and the sample artwork is attached. (Final high resolution artwork will be provided at contract award)
The display stand must allow for the banner material to be changed with about a 1b border inside the base to where the current banner can be removed and a new banner be attached to where it retracts back into the base.
The banner stand, pole and any other items that come with the banner stand must fit inside of a travel padded carrying case.
The travel bag must be gray in color and have the following;
*An adjustable shoulder strap from end to end of the case.
*Must have a metal zipper about 64b and has two metal zipper ends so that you can zip from
each end and meet in the middle so as a lock can be used to secure the items inside the bag.
The carrying case must have Velco straps that are approximately 2" wide that will hold in the display stand from shifting around inside the case. *There will be 3 pockets inside the lid of the bag and run the length of the bag to store items such as the pole and any other items that are need to carry. Each pocket will have a Velcro closure to secure the items as not to shift.
*There will be 4 rounded rubber feet 1/2" diameter so the case can be placed on the side without falling over.
Each Stand/travel case must be packaged separately in a corrugated box of a minimum of 200 lb test and both ends are to be secured with tape so that during shipping the box is not damaged.
Transportation Company must coordinate with POC 48 hours before delivery is to be made. (delivery address list with POC information will be provided after contract award)
Provide inside delivery to:
US Army Great Lakes Recruiting Bn
Holiday Office Park N
6500 Mercantile Way
Lansing, MI 48911, 36, EA;LI 024: Requirement for Double Sided Banner-Up Display Stands are as follows;
Brand name or equal to SilverWing Double Sided, (no MFR SKU.
Retractable Aluminum Base must be 36b long and 9b wide.
The color of the base must be Silver with Chrome ends.
The material for the banner has to be or equal to curl, tear and water resistant 13oz Vinyl and measures 33.5b to fit the display system that is being requested and 81b tall to allow an 80b message area for printing. The same message will go on both sides of the banner and the sample artwork is attached. (Final high resolution artwork will be provided at contract award)
The display stand must allow for the banner material to be changed with about a 1b border inside the base to where the current banner can be removed and a new banner be attached to where it retracts back into the base.
The banner stand, pole and any other items that come with the banner stand must fit inside of a travel padded carrying case.
The travel bag must be gray in color and have the following;
*An adjustable shoulder strap from end to end of the case.
*Must have a metal zipper about 64b and has two metal zipper ends so that you can zip from
each end and meet in the middle so as a lock can be used to secure the items inside the bag.
The carrying case must have Velco straps that are approximately 2" wide that will hold in the display stand from shifting around inside the case. *There will be 3 pockets inside the lid of the bag and run the length of the bag to store items such as the pole and any other items that are need to carry. Each pocket will have a Velcro closure to secure the items as not to shift.
*There will be 4 rounded rubber feet 1/2" diameter so the case can be placed on the side without falling over.
Each Stand/travel case must be packaged separately in a corrugated box of a minimum of 200 lb test and both ends are to be secured with tape so that during shipping the box is not damaged.
Transportation Company must coordinate with POC 48 hours before delivery is to be made. (delivery address list with POC information will be provided after contract award)
Provide inside delivery to:
US Army Indianapolis Recruiting BN
9152 Kent Ave., Bldg 401C
Indianapolis, IN 46216-2064, 36, EA;LI 025: Requirement for Double Sided Banner-Up Display Stands are as follows;
Brand name or equal to SilverWing Double Sided, (no MFR SKU.
Retractable Aluminum Base must be 36b long and 9b wide.
The color of the base must be Silver with Chrome ends.
The material for the banner has to be or equal to curl, tear and water resistant 13oz Vinyl and measures 33.5b to fit the display system that is being requested and 81b tall to allow an 80b message area for printing. The same message will go on both sides of the banner and the sample artwork is attached. (Final high resolution artwork will be provided at contract award)
The display stand must allow for the banner material to be changed with about a 1b border inside the base to where the current banner can be removed and a new banner be attached to where it retracts back into the base.
The banner stand, pole and any other items that come with the banner stand must fit inside of a travel padded carrying case.
The travel bag must be gray in color and have the following;
*An adjustable shoulder strap from end to end of the case.
*Must have a metal zipper about 64b and has two metal zipper ends so that you can zip from
each end and meet in the middle so as a lock can be used to secure the items inside the bag.
The carrying case must have Velco straps that are approximately 2" wide that will hold in the display stand from shifting around inside the case. *There will be 3 pockets inside the lid of the bag and run the length of the bag to store items such as the pole and any other items that are need to carry. Each pocket will have a Velcro closure to secure the items as not to shift.
*There will be 4 rounded rubber feet 1/2" diameter so the case can be placed on the side without falling over.
Each Stand/travel case must be packaged separately in a corrugated box of a minimum of 200 lb test and both ends are to be secured with tape so that during shipping the box is not damaged.
Transportation Company must coordinate with POC 48 hours before delivery is to be made. (delivery address list with POC information will be provided after contract award)
Provide inside delivery to:
US Army Milwaukee Recruiting Bn
11425 W Lake Park Dr
Milwaukee, WI 53224, 36, EA;LI 026: Requirement for Double Sided Banner-Up Display Stands are as follows;
Brand name or equal to SilverWing Double Sided, (no MFR SKU.
Retractable Aluminum Base must be 36b long and 9b wide.
The color of the base must be Silver with Chrome ends.
The material for the banner has to be or equal to curl, tear and water resistant 13oz Vinyl and measures 33.5b to fit the display system that is being requested and 81b tall to allow an 80b message area for printing. The same message will go on both sides of the banner and the sample artwork is attached. (Final high resolution artwork will be provided at contract award)
The display stand must allow for the banner material to be changed with about a 1b border inside the base to where the current banner can be removed and a new banner be attached to where it retracts back into the base.
The banner stand, pole and any other items that come with the banner stand must fit inside of a travel padded carrying case.
The travel bag must be gray in color and have the following;
*An adjustable shoulder strap from end to end of the case.
*Must have a metal zipper about 64b and has two metal zipper ends so that you can zip from
each end and meet in the middle so as a lock can be used to secure the items inside the bag.
The carrying case must have Velco straps that are approximately 2" wide that will hold in the display stand from shifting around inside the case. *There will be 3 pockets inside the lid of the bag and run the length of the bag to store items such as the pole and any other items that are need to carry. Each pocket will have a Velcro closure to secure the items as not to shift.
*There will be 4 rounded rubber feet 1/2" diameter so the case can be placed on the side without falling over.
Each Stand/travel case must be packaged separately in a corrugated box of a minimum of 200 lb test and both ends are to be secured with tape so that during shipping the box is not damaged.
Transportation Company must coordinate with POC 48 hours before delivery is to be made. (delivery address list with POC information will be provided after contract award)
Provide inside delivery to:
US Army Minneapolis Recruiting Bn
1 Federal Drive
BHW BLDG, Suite 2916
St Paul, MN 55111, 36, EA;LI 027: Requirement for Double Sided Banner-Up Display Stands are as follows;
Brand name or equal to SilverWing Double Sided, (no MFR SKU.
Retractable Aluminum Base must be 36b long and 9b wide.
The color of the base must be Silver with Chrome ends.
The material for the banner has to be or equal to curl, tear and water resistant 13oz Vinyl and measures 33.5b to fit the display system that is being requested and 81b tall to allow an 80b message area for printing. The same message will go on both sides of the banner and the sample artwork is attached. (Final high resolution artwork will be provided at contract award)
The display stand must allow for the banner material to be changed with about a 1b border inside the base to where the current banner can be removed and a new banner be attached to where it retracts back into the base.
The banner stand, pole and any other items that come with the banner stand must fit inside of a travel padded carrying case.
The travel bag must be gray in color and have the following;
*An adjustable shoulder strap from end to end of the case.
*Must have a metal zipper about 64b and has two metal zipper ends so that you can zip from
each end and meet in the middle so as a lock can be used to secure the items inside the bag.
The carrying case must have Velco straps that are approximately 2" wide that will hold in the display stand from shifting around inside the case. *There will be 3 pockets inside the lid of the bag and run the length of the bag to store items such as the pole and any other items that are need to carry. Each pocket will have a Velcro closure to secure the items as not to shift.
*There will be 4 rounded rubber feet 1/2" diameter so the case can be placed on the side without falling over.
Each Stand/travel case must be packaged separately in a corrugated box of a minimum of 200 lb test and both ends are to be secured with tape so that during shipping the box is not damaged.
Transportation Company must coordinate with POC 48 hours before delivery is to be made. (delivery address list with POC information will be provided after contract award)
Provide inside delivery to:
US Army Nashville Recruiting Bn
2517 Perimeter Place Drive
Nashville, TN 37214-3671, 38, EA;LI 028: Requirement for Double Sided Banner-Up Display Stands are as follows;
Brand name or equal to SilverWing Double Sided, (no MFR SKU.
Retractable Aluminum Base must be 36b long and 9b wide.
The color of the base must be Silver with Chrome ends.
The material for the banner has to be or equal to curl, tear and water resistant 13oz Vinyl and measures 33.5b to fit the display s