The RFP Database
New business relationships start here

Chest Compression System


Texas, United States
Government : Federal
RFP
Go to the link
This document has expired, therefore the above link may no longer work.

(Medical Equipment)



1

The Department of Veterans Affairs North Texas Veterans Health Care System in Dallas, TX is posting this combined Synopsis/Solicitation through the Contracting Officer in San Antonio, Texas. The government intends to make a contract award to the Lowest Price Technically Acceptable vendor that can provide the required items in accordance to the attached documents.


SCOPE OF WORK: Delivery and set up of Mechanical Chest Compression System for the Dallas VA Emergency Department, Medicine Service, 4500 South Lancaster Rd. Dallas, TX 75216-9982. Delivery activities shall consist of the following:

Set-up.
All preparation necessarily required to ready the Mechanical Chest Compression System for operation (set-up, assembly and training).

Post installation inspection.
COTR will verify that required specifications are met and testing will be performed as necessary to meet VA and vendor requirements.

Upon receiving a maintenance and repair call from VANTHCS, the Contractor shall make a return telephone call for within 2 hours. The Contractor will restore the equipment to FULL PERFORMANCE within forty-eight (48) hours of the original call. The Contractor shall notify the COTR of the existence or development of any defects in the equipment covered under this contract which the Contractor considers he/she is not responsible for under the terms of the contract (such as operator misuse). Training and support and preventative maintenance and educational courses to be provided on-site as indicated.


Mechanical Chest Compression System:

Equipment features: Lucas 3.1 (99576-000063) or Equal
Battery Powered Mechanical Device that provides 45 minutes or more per charge of continuous chest compressions during CPR utilizing a single piston aligned over the patient s sternum. Able to be connected to external 120/240 VAC power for prolonged operation. Item is secured directly to the patient utilizing a strapping system that relieves staff from having to constantly hold/stabilize the device during operation.
Compression Depth 1.8 & 2.1 +/- .1 IN
Compression Frequency, 102, 111, or 120 compressions/minute
Patient Size Sternum Height 6.7 11.9 IN, Chest Width 17.7 IN
Able to store and transmit post-event performance reports via WiFi
Rechargeable Battery Pack
Charge Time < 4 Hrs
Capacity 3300 mAh



EXCLUSIONS (unless otherwise quoted) :

Modifications or corrections to the work scope dictated by concealed conditions encountered in the performance of the work and not indicated by the drawings, or specifications.
Modification or corrections to installation room or supplied power.

PERSONNEL CLEARANCES AND PRIVACY CONSIDERATIONS: The Contractor will ensure that their personnel and subcontractor personnel meet the privacy standards as set forth by HIPAA (Health Insurance Portability and Accountability Act of 1996) with respect personal and confidential information that they may come upon, while servicing medical equipment.

PATIENT HEALTH INFORMATION (PHI) AND INDIVIDUALLY IDENTIFIABLE INFORMATION (III):
This system does contain Patient Health Information (PHI) but does not contain Individually Identifiable Information (III).B B No VA data will leave the VA Facility.B If a hard drive or any other electronic storage device needs to be replaced, the device will be given to the ISO.B After destruction of the data by degaussing, the device may be returned to the vendor for inventory control if so requested.B The repair of this system will be supervised by a VA employee in BioMed to assure data does not leave the facility.B The COTR is responsible to assure that no VA data leaves the facility and an employee supervises repair.B No Security & privacy training is needed by the vendor because the repair will be supervised.B No other security statement is needed.B

DOCUMENTATION: Contractor will provide the COTR with individual written reports which describe the maintenance and repair service performed on the equipment under warranty in sufficient detail so as to be acceptable by field inspectors of the Joint Commission and other inspecting bodies. This shall include a list of all parts replaced, all service performed as well as a statement that the equipment is operating per manufacturer s specifications after repair. The service report will be signed by the contractor s service technician, and by designated VANTHCS personnel.

Prior to award, bidder must have a facility to include personnel, test equipment, parts inventory, training certificates, licenses and technical documentation available for inspection by VA Medical Center personnel and be able to show written evidence to technical qualifications of personnel, test equipment (and calibration documentation) licenses and availability of parts. Parts availability must be written documentation from either the equipment manufacturer or authorized parts supplier. In either case, bidder must be able to show the availability of parts to him/her within 24 hours after initial call. For contracts for maintenance and repair services form other than the original manufacturer or a designated representative, the Contractor will be fully responsible for obtaining all technical documentation necessary to fulfill contractual obligations.

The Contractor warrants that the services to be performed under this contract will be performed in a good workmanship manner and shall conform to the standards of the industry. This warranty is given expressly and in place of all other warranties, expressed or implied, statutory or otherwise, and is the only warranty given by the Contractor.

Warranty items that expire during the contract period will be added to the contract as appropriate.

9. NEGLIGANCE CLAUSE: When services and parts are required as a result of accident, abuse, misuse or negligence by other than the Contractor or his representative, and are not included as a part of PM inspection or service calls, such needs will be reported to the Contracting Officer s representative along with estimates of charges. The Contracting Officer and Representative will evaluate these needs and authorize appropriate action. The parts will be installed under the terms of the contact and each invoice is to include a legible itemized list of labor charges and parts costs. The government will incur no charges for service and parts including glassware due to accident, abuse, misuse or negligence by the contractor or his representative.

Government for which the Government Agency shall have unlimited rights to use, dispose
of, or disclose such data contained therein as it determines to be in the public interest.
C. Contractor shall not create or maintain any records that are not specifically tied to or
authorized by the contract using Government IT equipment and/or Government records.
D. Contractor shall not retain, use, sell, or disseminate copies of any deliverable that contains
information covered by the Privacy Act of 1974 or that which is generally protected by the
Freedom of Information Act.
E. Contractor shall not create or maintain any records containing any Government Agency
records that are not specifically tied to or authorized by the contract or identified in the RCS 10-1.
F. The Government Agency owns the rights to all data/records produced as part of this
contract.
G. The Government Agency owns the rights to all electronic information (electronic data,
electronic information systems, electronic databases, etc.) and all supporting documentation created as part of this contract. Contractor must deliver sufficient technical documentation with all data deliverables to permit the agency to use the data.
H. Contractor agrees to comply with Federal and Agency records management policies,
including those policies associated with the safeguarding of records covered by the Privacy
Act of 1974. These policies include the preservation of all records created or received
regardless of format [paper, electronic, etc.] or mode of transmission [e-mail, fax, etc.] or
state of completion [draft, final, etc.].
I. No disposition of documents will be allowed without the prior written consent of the
Contracting Officer. The Agency and its contractors are responsible for preventing the
alienation or unauthorized destruction of records, including all forms of mutilation. Willful
and unlawful destruction, damage or alienation of Federal records is subject to the fines
and penalties imposed by 18 U.S.C. 2701. Records may not be removed from the legal
custody of the Agency or destroyed without regard to the provisions of the agency records
schedules.
J. Contractor is required to obtain the Contracting Officer's approval prior to engaging in any contractual relationship (sub-contractor) in support of this contract requiring the disclosure
of information, documentary material and/or records generated under or relating to this
contract. The Contractor (and any sub-contractor) is required to abide by Government and
Agency guidance for protecting sensitive and proprietary information.

11. HD Statement: Electronic storage devices (ESD) of all forms containing any VA data shall not be removed from VA control. If the ESD needs to be replaced, the failed ESD shall be given to the facility Information Security Officer (ISO) for sanitization. Following sanitization of the ESD and at the request of the vendor, the sanitized ESD may be returned to the vendor for inventory purposes. If the equipment/system must be taken off VA premises for service or at the end of a lease, the ESD shall be removed by the vendor without cost to the VA and left at the VA for reinstallation or sanitization. Questions can be referred to the ISO.

12. SECURITY STATEMENT: No remote access. Chaperoned on site!

13. END OF CONTRACT: Contractor guarantees that all equipment covered in this contract shall meet or exceed manufacturer s performance specifications at the contract expiration date.

Ognian Ivanov
ognian.ivanov@va.gov

ognian.ivanov@va.gov

    1. Home
    2. Articles
    3. Login or Register

    4. Search

    5. Add/Announce your RFP