The RFP Database
New business relationships start here

Cemline Semi-instantaneous water heater


Iowa, United States
Government : Federal
RFP
Go to the link
This document has expired, therefore the above link may no longer work.

THIS IS A SOURCES SOUGHT NOTICE ONLY ,22019-SS14,and a SOLICITATION IS NOT CURRENTLY AVAILABLE. This notice is for information and planning purposes only and shall not be construed as a solicitation or an obligation on the part of the Government. This request for capability information does not constitute a request for quotes. Submission of any information in response to this market survey is purely voluntary. The government assumes no financial responsibility for any costs incurred associated to this request for capability information.

USDA, APHIS, is seeking a contractor to provide the Cemline Semi-instantaneous water heater, model number V45SWH836, Size 20x36, coil 936 DW. This requirement is brand name or equal per FAR 52.211-6.
Salient characteristics:


Storage heater shall be factory assembled and packaged.
Water heater shall be constructed in accordance with ASME Code for a working pressure of 125 psig.
The packaged water heater shall be constructed with a (vertical) steel tank, cement lined with an 11" x 15" manhole, with stainless threaded opening, 3/4" O.D. copper tubes, copper lined tube sheet, and steel or cast iron coil head.
Heater shall be mounted on a steel support skid and shall have concealed lifting lugs.
Heater shall be insulated with 3" Fiberglass protected by an enameled metal jacket, 20 gauge minimum thickness, with access panel to the manhole.
Heater shall be factory assembled and piped including incoming steam strainer, (pilot) operated temperature regulator, main and auxiliary float and thermostatic steam traps, and condensate strainer.
Coil shall have copper wrapper, shall be baffled and shall have an integral valved circulator to circulate the water across the coil into the bottom of the tank.
Heater shall be provided with a field programmable digital electronic limit control with LCD readout and digital thermometer.
Heater shall be furnished with a water pressure gauge and an A.S.M.E. pressure-temperature relief valve of sufficient size to relieve total BTU input of the coil.
Heater shall be provided with a vacuum breaker.
Manufacturer shall assume responsibility for correct sizing of components to assure performance designated in design criteria.
Storage Gallon Capacity 45
This sources sought request is being used as a means of conducting market research to identify parties having an interest in and the resources to provide the product(s) required. The result of this market research will contribute to determining whether there are adequate sources available from which to receive competitive proposals.


The NAICS code is 333318, with a small business size of 1000 employees.


Submission Instructions: Interested Businesses, with active SAM records (www.sam.gov), who consider themselves qualified to provide the listed service(s) are invited to submit a response to this Sources Sought notice by 9:00 AM (Central Time) December 21st, 2018. If your organization has the appropriate qualifications and capacity to provide a qualifying service(s), please provide a complete and current record of your Single Award Management (SAM) listing including DUNS number, Organization name, address, contact name, email address, Web site address, telephone number, type of organization, small business type (if any), etc. to the point of contact below.


All questions or responses under this Sources Sought notice shall be sent to Sarah Schauf, Contracting Specialist via email Sarah.c.schauf@usda.gov.


THIS IS A NOTICE FOR SOURCES SOUGHT. No feedback or evaluations will be provided to companies regarding their submissions. However, sources may be contacted to gather additional information as required.
Place of Performance:
USDA-APHIS
1920 Dayton Ave
Ames, Iowa 50010
United States


Sarah C Schauf, Contracting Officer, Phone 5153377572, Email sarah.c.schauf@aphis.usda.gov

    1. Home
    2. Articles
    3. Login or Register

    4. Search

    5. Add/Announce your RFP