Case skid steCase skid steer loader maintenance
SOURCES SOUGHT NOTICE FOR NAVAL SURFACE WARFARE CENTER PHILADELPHIA DIVISION (NSWCPD)
SUBJECT: Preventive maintenance services for Case skid steer loaders.
THIS SOURCES SOUGHT IS NOT A REQUEST FOR PROPOSAL. It is a market research tool being used to determine potential and eligible firms capable of providing the service described herein prior to determining the method of acquisition.
SOURCES SOUGHT DATE: 17 July 2019
CONTRACTING OFFICE ADDRESS: N64498 5001 S. Broad Street Philadelphia, PA 19112
NAICS CODE: 911310/ $7.5 Size Standard
CLASSIFICATION CODE (PSC/FSC): J099
INCUBMENT: New procurement
PREVIOUS STRATEGY: No history
TECHNICAL CODE: Code 1440
ANTICIPATED AWARD DATE: Q4 FY19
RESPONSE DATE: 17 July 2019
ANTICIPATED SET-ASIDE: Small Business
CONTACT POINTS: Thomas Coletti
Contract Type - Firm Fixed Price award is anticipated.
Period of Performance - The performance period will be 12-months.
Personnel Security Clearance - Escorted visits
Work Location Requirements -Philadelphia, PA;
Scope - Dealer certified technicians who use NIST traceable standards and procedures shall perform the service, repair and maintenance.
Preventive dealer maintenance services are defined as the following:
• The contractor shall ensure all safety equipment works. This includes, but not limited to, seat-belt switch, lap-bar switch, safety decals, and parking brake.
• The contractor shall ensure all hardware is secure and undamaged.
• The contractor shall ensure the batteries and battery cables are in an operable manner.
• The contractor shall ensure the charging system and starting system is working.
• The contractor shall check for oil leaks and test the cooling system. Any damage to these systems shall be repaired.
• The contractor shall check fluid levels to ensure they are in an operable level.
• The contractor shall perform oil changes as applicable.
• The contractor shall change oil filters as applicable.
• The contractor shall change the fuel filter as applicable.
• The contractor shall change the inner and outer air filters as applicable.
• The contractor shall inspect the drive belt for wear and cracks.
• The contractor shall adjust engine valves.
• The contractor shall ensure the transmission is in an operable manner.
Thomas C Coletti, Contract Specialist, Email thomas.coletti@navy.mil
