Case Cart-WI
Statement of Requirements
General Description of Performance Requirements and Features of the System:
The Case Cart System must be a closed body system constructed of Stainless steel, Type 300 Series, non-magnetic. Each cart must contain a pan shaped and stepped down bottom, sloped to facilitate draining. Resultant body shell should be bolted to the chassis, and protected by an encircling rubber bumper set in a stainless steel channel. It needs to be equipped with swivel plate casters with one swivel lock, constructed as such; Standard 6" stainless-steel casters with polyurethane wheels. Each caster should be weight rated at 300 pounds. A tubular push handle must be provided at one end of the cart for ease of handling. The Cart should be equipped with double hinged door(s) constructed with paddle latch pulls on leading edges and operate on offset hinges permitting full 270 degree swing. The cart will contain a positive spring acting clips at cart ends to capture doors in their full open positions for cart washing or operating room use. Each Cart will have 3 Custom removable, pull-out type, solid perforated stainless steel shelves. Shelves should slide on adjustable angle sliders, to facilitate draining. Lifetime Limited warranty on workmanship and material defects will be provided by Vendor.
Site Specific Requirements:
Larger Cart
" Overall width of 38 3/8"
" Overall depth of 27 3/8"
" Overall height of 55 B="
" Overall floor space not to exceed 8.46sq ft.
" Useable interior space of 22.50 cu ft.
" 3 pull out shelves, solid perforated stainless steel shelves
" should have the capability of holding multiple pans, case medical containers, in the open unlatched position when cart is properly loaded and closed for transport
" Standard body w/recessed handle
" 4-way tight bumper
Smaller Cart
" Overall width of 26"
" Overall depth of 27 3/8"
" Overall height of 55 1/2
" Overall floor space not to exceed 5.97sq ft.
" Useable interior space of14.78 cu ft.
" 3 pull out shelves, solid perforated stainless steel shelves
" should have the capability of holding multiple pans, case medical containers, in the open unlatched position when cart is properly loaded and closed for transport
" 4-way tight bumper
[email protected]
[email protected]
