CVN-78 TOOLS
MODIFICATION NOTICE:Quotes are being solicited under solicitation number N62793-14-R-A135A. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. The solicitation is issued as a Request for Quote (RFQ), unless otherwise indicated herein.If your company can provide the product/services listed on the solicitation and comply with all of the solicitation instructions, please respond to this notice. To view the specifications, please go to www.FedBid.com and reference Buy No. 626332_04.
GSA Schedule Bids Only: Sellers bidding on this opportunity MUST have the items requested on an existing GSA Schedule. The Schedule must either be in the Seller's name or the Seller must be able to document its ability to act as an agent of a partner's Schedule. Sellers must not bid more than their applicable contract ceiling price, excluding the FedBid Fee, for contract-specific items. If FedBid receives notice that, due to inclusion of the FedBid Fee, the Selected Bid's line item pricing is higher than the Selected Seller's applicable published government contract pricing, the FedBid Fee will be reduced to ensure the Selected Bid's line item pricing does not exceed the Selected Seller's applicable contract pricing. Sellers may offer Open Market items only in accordance with the approved Terms and Conditions of their respective GSA Schedule AND upon approval from the soliciting Contracting Officer. Information regarding GSA Schedules can be found at www.GSA.gov. This requirement is a [ Service-Disabled Veteran Owned ] set-aside and only qualified sellers may submit quotes.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-07-16 11:30:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be SUFFOLK, VA 23435 The NAVSEA SUPSHIP - Newport News requires the following items, Exact Match Only, to the following: LI 001: 13G974 SCREWDRIVER Screwdriver,Keystone,1/4 x 24 In,Chrome NIIN 00-010-7915, 1, EA; LI 002: 10Z822 PLIERS, SLIP Tongue/Groove Pliers,Smooth,10 ln,Blue NIIN 00-059-6711, 3, EA; LI 003: 3R484 HAMMER, HAND Ball Pein Hammer,12 Oz NIIN 00-061-8542, 23, EA; LI 004: 1FX40 ?KEY SET,SOCKET HEAD SCREW Hex Key Set,1.5 - 10mm,L-Shaped,Short NIIN 00-112-9599, 4, EA; LI 005: 4TDE9 SOCKET,SOCKET WRENCH Flex Socket,3/8 In Dr,7/16 In,12 Pt,Std NIIN 00-142-5154, 2, EA; LI 006: 3R095 SCREWDRIVER,OFFSET Offset Screwdriver,Phillips #1,#2 NIIN 00-180-0798, 3, EA; LI 007: 2AJK9 (SET) PUNCH,CUTTING,DOUBLE BOW, 1/2 SET Arch Punch Set,1/4 To 1 In,7 Pc NIIN 00-180-0923, 10, EA; LI 008: 2AJK9 (SET) PUNCH,CUTTING,DOUBLE BOW, 5/8 SET Arch Punch Set,1/4 To 1 In,7 Pc NIIN 00-180-0924, 10, EA; LI 009: 2AJK9 (SET) PUNCH,CUTTING,DOUBLE BOW, 3/4 SET Arch Punch Set,1/4 To 1 In,7 Pc NIIN 00-180-0925, 10, EA; LI 010: 2AJK9 (SET) PUNCH,CUTTING,DOUBLE BOW, 7/8 SET Arch Punch Set,1/4 To 1 In,7 Pc NIIN 00-180-0926, 10, EA; LI 011: 2AJK9 (SET) PUNCH,CUTTING,DOUBLE BOW, 1 in SET Arch Punch Set,1/4 To 1 In,7 Pc NIIN 00-180-0927, 10, EA; LI 012: 1Q740 PUNCH,CUTTING,SINGLE BOW Punch,Drive Pin,1/8 In NIIN 00-180-0939, 6, EA; LI 013: 1Q738 PUNCH,CUTTING,SINGLE BOW Drive Pin Punch,1/4 x 5 3/4 In NIIN 00-180-0943, 11, EA; LI 014: 1Q746 PUNCH,CUTTING,SINGLE BOW Drive Pin Punch,5/16 x 6 3/8 In NIIN 00-180-0945, 11, EA; LI 015: 49L978 FINGER,MECHANICAL Mechanical Fngr Rtrvr,Flxbl Jaw,23-1/2In NIIN 00-180-2951, 1, EA; LI 016: 24N405 CHISEL,PARING Socket Chisel,1 In. x 9 In. NIIN 00-186-8170, 1, EA; LI 017: 633048 SWAGE,TOP,BLACKSMITH'S NIIN 00-188-1840, 1, EA; LI 018: 3R213 PLIERS Duckbill Plier NIIN 00-188-3239, 3, EA; LI 019: 20X666 DIE, RETHREADING Hex Rethreading Bolt Die,Steel,1/4-28 NIIN 00189-3120, 8, EA; LI 020: 1FX51 CROWFOOT ATTACHMENT,SOCKET WRENCH Crowfoot Wrench,Flare,3/8Dr,11/16 In NIIN 00-189-7896, 4, EA; LI 021: 1AM79 SOCKET,SOCKET WRENCH Socket,1/2 In Dr,1-1/8 In,12 Pt,Std NIIN 00189-7914, 3, EA; LI 022: 1AH07 SOCKET,SOCKET WRENCH Socket,1/4 In Dr,5/16 In,6 Pt,Deep NIIN 00-189-7920, 3, EA; LI 023: 1AM63 SOCKET,SOCKET WRENCH Socket,1/2 In Dr,7/16 In,12 Pt,Std NIIN 00-189-7924, 4, EA; LI 024: 1AM65 SOCKET,SOCKET WRENCH Socket,1/2 In Dr,9/16 In,12 Pt,Std NIIN 00-189-7932, 4, EA; LI 025: 1AM75 SOCKET,SOCKET WRENCH Socket,1/2 In Dr,15/16 In,12 Pt,Std NIIN 00189-7935, 1, EA; LI 026: 1AF76 SOCKET,SOCKET WRENCH Socket,1/4 In Dr,1/2 In,12 Pt,Std NIIN 00-189-8610, 18, EA; LI 027: 1N684 DRILL TWIST Taper Shank Drill,5/32,#1MT,Blk Oxide NIIN 00-189-9186, 5, EA; LI 028: 1F579 DRILL TWIST Jobber Bit,#5,High Speed Steel NIIN 00-189-9250, 1, EA; LI 029: 1F589 DRILL TWIST Jobber Bit,#10,High Speed Steel NIIN 00-189-9255, 1, EA; LI 030: 1F599 DRILL TWIST Jobber Bit,#15,High Speed Steel NIIN 00-189-9260, 1, EA; LI 031: 1F601 DRILL TWIST Jobber Bit,#16,High Speed Steel NIIN 00-189-9261, 1, EA; LI 032: 1F611 DRILL TWIST Jobber Bit,#21,High Speed Steel NIIN 00-189-9266, 1, EA; LI 033: 1F615 DRILL TWIST Jobber Bit,#23,High Speed Steel NIIN 00-189-9268, 1, EA; LI 034: 1F617 DRILL TWIST Jobber Bit,#24,High Speed Steel NIIN 00-189-9269, 1, EA; LI 035: 1F619 DRILL TWIST Jobber Bit,#25,High Speed Steel NIIN 00-189-9270, 1, EA; LI 036: 1F625 DRILL TWIST Jobber Bit,#28,High Speed Steel NIIN 00-189-9273, 1, EA; LI 037: 1F629 DRILL TWIST Jobber Bit,#30,High Speed Steel NIIN 00-189-9275, 1, EA; LI 038: 1F637 DRILL TWIST Jobber Bit,#34,High Speed Steel NIIN 00-189-9279, 1, EA; LI 039: 1F673 DRILL TWIST Jobber Bit,#52,High Speed Steel NIIN 00-189-9297, 1, EA; LI 040: 1F675 DRILL TWIST Jobber Bit,#53,High Speed Steel NIIN 00-189-9298, 1, EA; LI 041: 1F681 DRILL TWIST Jobber Bit,#56,High Speed Steel NIIN 00-189-9301, 1, EA; LI 042: 1F689 DRILL TWIST Jobber Bit,#60,High Speed Steel NIIN 00-189-9305, 1, EA; LI 043: 4HAP1 DRILL TWIST Taper Shank Drill,19/64,#1MT,Black Oxide NIIN 00-189-9309, 5, EA; LI 044: 1N712 DRILL TWIST Taper Shank Drill,11/32,#1MT,Blk Oxide NIIN 00-189-9312, 9, EA; LI 045: 1N716 DRILL TWIST Taper Shank Drill,3/8,#1MT,Blk Oxide NIIN 00-189-9314, 9, EA; LI 046: 4HAP4 DRILL TWIST Taper Shank Drill,25/64,#1MT,Black Oxide NIIN 00-189-9315, 5, EA; LI 047: 1N720 DRILL TWIST Taper Shank Drill,13/32,#1MT,Blk Oxide NIIN 00-189-9316, 9, EA; LI 048: 4HAP5 DRILL TWIST Taper Shank Drill,27/64,#1MT,Black Oxide NIIN 00-189-9317, 5, EA; LI 049: 1N725 DRILL TWIST Taper Shank Drill,7/16,#1MT,Blk Oxide NIIN 00-189-9318, 9, EA; LI 050: 4HAP6 DRILL TWIST Taper Shank Drill,29/64,#1MT,Black Oxide NIIN 00-189-9319, 3, EA; LI 051: 4HAR1 DRILL TWIST Taper Shank Drill,37/64,#2MT,Black Oxide NIIN 00-189-9327, 5, EA; LI 052: 3R106 PUNCH, CENTER Center Punch,6 1/4 L x 19/32 In Hex NIIN 00-197-9490, 1, EA; LI 053: 20X671 DIE, RETHREADING Hex Rethreading Bolt Die,Steel,7/16-14 NIIN 00-197-9553, 9, EA; LI 054: 20X675 DIE, RETHREADING Hex Rethreading Bolt Die,Steel,9/16-12 NIIN 00-197-9555, 3, EA; LI 055: 20X679 DIE, RETHREADING NIIN 00197-9557, 3, EA; LI 056: 20X681 DIE, RETHREADING Hex Rethreading Bolt Die,Steel,7/8-9 NIIN 00-197-9558, 3, EA; LI 057: 20X678 DIE, RETHREADING Hex Rethreading Bolt Die,Steel,5/8-18 NIIN 00-197-9567, 2, EA; LI 058: 20X682 DIE, RETHREADING Hex Rethreading Bolt Die,Steel,7/8-14 NIIN 00-197-9569, 2, EA; LI 059: 20X684 DIE, RETHREADING NIIN 00-197-9571, 2, EA; LI 060: 4RE22 KEY,SOCKET HEAD SCREW Hex Key,L,3/8 In,4-1/4 in. L,PK5 NIIN 00-198-5390, 20, EA; LI 061: 4RE24 KEY,SOCKET HEAD SCREW Hex Key,L,1/2 In,5-1/4 in. L NIIN 00-198-5391, 9, EA; LI 062: 4RE10 KEY,SOCKET HEAD SCREW Hex Key,L,3/64 In,1-43/64 in. L,PK10 NIIN 00-198-5401, 19, EA; LI 063: 4RE60 KEY,SOCKET HEAD SCREW Hex Key,L,3/8 In,6-3/4 in. L,PK5 NIIN 00-198-5406, 1, EA; LI 064: 4RE58 KEY,SOCKET HEAD SCREW Hex Key,L,5/16 In,6 in. L,PK5 NIIN 00-198-5409, 3, EA; LI 065: 4RE55 KEY,SOCKET HEAD SCREW Hex Key,L,3/16 In,4-1/2 in. L,PK10 NIIN 00-198-5410, 31, EA; LI 066: 4RE50 KEY,SOCKET HEAD SCREW Hex Key,L,3/32 In,3-3/8 in. L,PK10 NIIN 00-198-5413, 7, EA; LI 067: 6C956 FILE, HAND Flat File,6 In,Smooth/Double,American NIIN 00-203-4552, 1, EA; LI 068: 5XKE9 FILE, HAND Knife File, Smooth, American, 10 In NIIN 00-203-4554, 1, EA; LI 069: 6C951 FILE, HAND Mill File,10In,Sq Edge,Second/Single NIIN 00-203-4556, 2, EA; LI 070: 6A634 FILE, HAND Flat File,12 In,Smooth/Double,American NIIN 00-203-4936, 1, EA; LI 071: 1G710 FILE, HAND Knife File,8 In,Second,American NIIN 00-203-4948, 4, EA; LI 072: 6C954 FILE, HAND Flat File,14 In Length NIIN 00-203-5486, 1, EA; LI 073: 1AKB3 FILE, HAND Hand File,10 In,0.375 In Sq,Bastard Cut NIIN 00-203-9774, 4, EA; LI 074: 1TTW9 BRUSH, PAINT Paint Brush,#8,10-1/2in. NIIN 00-205-6511, 10, EA; LI 075: 3R296 SHEARS, METAL Straight Snips 8 In NIIN 00-221-1085, 3, EA; LI 076: 20X630 DIESTOCK Round Die Stock NIIN 00-221-1236, 1, EA; LI 077: 3LY74 NIPPERS, END End Cutting Nippers,7-1/2 In NIIN 00-221-1499, 2, EA; LI 078: 6R587 AWL, SCRATCH Scratch Awl,7 1/4 In L NIIN 00-221-1542, 17, EA; LI 079: 6NAY2 GAGE, SURFACE Surface Gage,3x2-9/16 In,5/16 Dia,9 In L NIIN 00-221-1842, 15, EA; LI 080: 4CEN5 GAGE,DEPTH,RULE Rule Depth Gage,6 In,32nds/64ths NIIN 00-221-1902, 4, EA; LI 081: 6NAZ8 GAGE,SCREW PITCH Screw Pitch Gage,27 Leaves,2.75-28 TPI NIIN 00-221-1992, 2, EA; LI 082: 1AM33 HANDLE,SOCKET WRENCH Handle,Hinge,10 7/8 In NIIN 00-221-7958, 4, EA; LI 083: 1AF43 HANDLE,SOCKET WRENCH Handle,Hinge,5 3/4 In NIIN 00-221-7960, 10, EA; LI 084: 1AF44 HANDLE,SOCKET WRENCH Handle,T,4 1/2 In NIIN 00-221-7966, 3, EA; LI 085: 1C054 WRENCH,RATCHET Ratcheting Wrench,Square/Hex NIIN 00-221-7980, 4, EA; LI 086: 4RE50 HANDLE,SOCKET WRENCH Hex Key,L,3/32 In,3-3/8 in. L,PK10 NIIN 00-221-8036, 5, EA; LI 087: 3R144 CHISEL, COLD Cold Chisel,5/8 In. x 6-3/4 In. NIIN 00-221-8132, 5, EA; LI 088: 48Z983 CHISEL,SIDE CUTTING,HAND Side Strike Chisel,1 In. x 10-3/4 In. NIIN 00-221-8133, 3, EA; LI 089: 4RE27 KEY,SOCKET HEAD SCREW Hex Key,L,3/4 In,7-1/4 in. L NIIN 00-222-1489, 3, EA; LI 090: 5c730 GAGE,CENTER Center Gage NIIN 00-222-4000, 1, EA; LI 091: 1Q740 PUNCH, DRIVE Punch,Drive Pin,1/8 In NIIN 00-223-1014, 3, EA; LI 092: 3R012 GAGE, THICKNESS Feeler Gauge Set,12 Blades,12 In NIIN 00-223-9194, 1, EA; LI 093: 5ln36 TROWEL Brick Trowel,London,11 In,Softgrip NIIN 00-223-9482, 4, EA; LI 094: 4VLV4 EXTRACTOR,STUFFING BOX AND PUMP PACKING Packing Extractor ,Removable,7 1/2 In. L NIIN 00-223-9556, 8, EA; LI 095: 4VLV8 EXTRACTOR,STUFFING BOX AND PUMP PACKING Packing Extractor,Non-Removable,19 In. L NIIN 00-223-9559, 4, EA; LI 096: 5C735 GAGE,SHEET AND PLATE Gage,Wire,#0-36 Range NIIN 00-223-9572, 1, EA; LI 097: 3R549 BAR, PINCH Pry Bar,Aligning,24 In,23/32 In Flat End NIIN 00-224-1372, 13, EA; LI 098: 3R186 PLIERS, SLIP Thin Nose Plier NIIN 00-224-1567, 6, EA; LI 099: 4RE26 KEY,SOCKET HEAD SCREW Hex Key,L,5/8 In,6-1/4 in. L NIIN 00-224-2510, 3, EA; LI 100: 1AMH8 WRENCH, BOX Box End Wrench,9/16 x 5/8 In,8-3/8 L NIIN 00-224-3140, 3, EA; LI 101: 1AMN8 WRENCH, BOX Box End Wrench,3/4 X 7/8 in.,12-3/4 L NIIN 00-224-3142, 1, EA; LI 102: 1amn9 WRENCH, BOX Box End Wrench,15/16 x 1 in.,14 in. L NIIN 00-224-3143, 5, EA; LI 103: 4a098 HAMMER, HAND Riveting Hammer,16 Oz,Fiberglass NIIN 00-224-4113, 2, EA; LI 104: 3ny48 HAMMER, HAND Hammer,Claw,16 Oz NIIN 00-224-4121, 1, EA; LI 105: 4re20 KEY,SOCKET HEAD SCREW Hex Key,L,1/4 In,3-1/4 in. L,PK10 NIIN 00-224-4659, 10, EA; LI 106: 6C238 SCREWDRIVER Screwdriver,Phillips,#1 x 3,Plastic NIIN 00-224-7370, 15, EA; LI 107: 3p281 CUTTER, HOLE Drill/Countersink Bit,60 Deg,#2,HSS,BRGT NIIN 00-224-8624, 10, EA; LI 108: 2XUU6 DRIFT, DRILL Morse Taper Drift Tool,#2, #3, #4 & #5 NIIN 00-224-8949, 2, EA; LI 109: 2XUU6 DRIFT, DRILL Morse Taper Drift Tool,#2, #3, #4 & #6 NIIN 00-224-8950, 5, EA; LI 110: 4dc05 WEDGE, JOINT Flange Wedge,Nonsparking,4 x 3/4 In NIIN 00-224-9485, 6, EA; LI 111: 1ak07 SOCKET,SOCKET WRENCH Socket,3/8 In Dr,3/8 In,12 Pt,Std NIIN 00-227-6702, 5, EA; LI 112: 1ak13 SOCKET,SOCKET WRENCH Socket,3/8 In Dr,3/4 In,12 Pt,Std NIIN 00-227-6705, 3, EA; LI 113: 5hm34 SCREWDRIVER,FLAT TIP Cabinet Screwdriver,3/16 x 6 In NIIN 00-227-7334, 3, EA; LI 114: 1af67 ADAPTER,SOCKET WRENCH Socket Adapter,3/8 F x 1/4 In M NIIN 00-227-8095, 8, EA; LI 115: 1ah75 EXTENSION,SOCKET WRENCH Socket Extension,3/8 x 6 In,Chrome NIIN 00-227-8107, 10, EA; LI 116: 1F545 DRILL, TWIST Jobber Bit,1/2 In.,High Speed Steel NIIN 00-227-9672, 1, EA; LI 117: 15J469 TAP,THREAD CUTTING Hand Tap,#4-40UNC,Bright NIIN 00-228-1040, 2, EA; LI 118: 4HAT3 DRILL, TWIST Taper Shank Drill,59/64,#3MT,Black Oxide NIIN 00-228-1322, 1, EA; LI 119: 1N777 DRILL, TWIST Taper Shank Drill,5/8,#2MT,Blk Oxide NIIN 00-228-1331, 7, EA; LI 120: 1N799 DRILL, TWIST Taper Shank Drill,11/16,#2MT,Blk Oxide NIIN 00-228-1334, 9, EA; LI 121: 1N807 DRILL, TWIST Taper Shank Drill,3/4,#2MT,Blk Oxide NIIN 00-228-1335, 3, EA; LI 122: 4HAR7 DRILL, TWIST Taper Shank Drill,49/64,#2MT,Black Oxide NIIN 00-228-1336, 3, EA; LI 123: 1N811 DRILL, TWIST Taper Shank Drill,25/32,#2MT,Blk Oxide NIIN 00-228-1337, 5, EA; LI 124: 4HAR9 DRILL, TWIST Taper Shank Drill,53/64,#3MT,Black Oxide NIIN 00-228-1340, 3, EA; LI 125: 1N823 DRILL, TWIST Taper Shank Drill,7/8,#3MT,Blk Oxide NIIN 00-228-1343, 3, EA; LI 126: 4HAT2 DRILL, TWIST Taper Shank Drill,57/64,#3MT,Black Oxide NIIN 00-228-1344, 3, EA; LI 127: 1N831 DRILL, TWIST Taper Shank Drill,15/16,#3MT,Blk Oxide NIIN 00-228-1345, 3, EA; LI 128: 1N835 DRILL, TWIST Taper Shank Drill,31/32,#3MT,Blk Oxide NIIN 00-228-1347, 5, EA; LI 129: 1N839 DRILL, TWIST Taper Shank Drill,1 In,#3MT,Blk Oxide NIIN 00-228-1349, 3, EA; LI 130: 4HAT6 DRILL, TWIST Taper Shank Drill,1 1/64,#3MT,Blk Oxide NIIN 00-228-1350, 3, EA; LI 131: 1N843 DRILL, TWIST Taper Shank Drill,1 1/32,#3MT,Blk Oxide NIIN 00-228-1351, 3, EA; LI 132: 1N847 DRILL, TWIST Taper Shank Drill,1 1/16,#3MT,Blk Oxide NIIN 00-228-1353, 4, EA; LI 133: 1N855 DRILL, TWIST Taper Shank Drill,1 1/8,#4MT,Blk Oxide NIIN 00-228-1357, 4, EA; LI 134: 1N863 DRILL, TWIST Taper Shank Drill,1 3/16,#4MT,Blk Oxide NIIN 00-228-1361, 5, EA; LI 135: 1AKW2 WRENCH,BOX AND OPEN END,COMBINATION Combination Wrench,5/16In.,5-3/8In. OAL NIIN 00-228-9503, 9, EA; LI 136: 1AKW4 WRENCH,BOX AND OPEN END,COMBINATION Combination Wrench,3/8In.,6In. OAL NIIN 00-228-9504, 11, EA; LI 137: 1AKW5 WRENCH,BOX AND OPEN END,COMBINATION Combination Wrench,7/16In.,7In. OAL NIIN 00-228-9505, 9, EA; LI 138: 1AKW6 WRENCH,BOX AND OPEN END,COMBINATION Combination Wrench,1/2In.,8In. OAL NIIN 00-228-9506, 9, EA; LI 139: 1AKW8 WRENCH,BOX AND OPEN END,COMBINATION Combination Wrench,5/8In.,9-1/2In. OAL NIIN 00-228-9508, 9, EA; LI 140: 1AKW9 WRENCH,BOX AND OPEN END,COMBINATION Combination Wrench,11/16In,10-1/4In OAL NIIN 00-228-9509, 4, EA; LI 141: 1AKX0 WRENCH,BOX AND OPEN END,COMBINATION Combination Wrench,3/4In.,11In. OAL NIIN 00-228-9510, 6, EA; LI 142: 1AKX1 WRENCH,BOX AND OPEN END,COMBINATION Combination Wrench,13/16In,11-3/8In OAL NIIN 00-228-9511, 6, EA; LI 143: 1AKX2 WRENCH,BOX AND OPEN END,COMBINATION Combination Wrench,7/8In.,12-1/2In. OAL NIIN 00-228-9512, 7, EA; LI 144: 1AKX4 WRENCH,BOX AND OPEN END,COMBINATION Combination Wrench,1In.,14In. OAL NIIN 00-228-9514, 3, EA; LI 145: 1AKX5 WRENCH,BOX AND OPEN END,COMBINATION Combination Wrench,1-1/16In,15-1/4In OAL NIIN 00-228-9515, 7, EA; LI 146: 1AKX8 WRENCH,BOX AND OPEN END,COMBINATION Combination Wrench,1-5/16In.,17In. OAL NIIN 00-228-9518, 8, EA; LI 147: 1ALC0 WRENCH,BOX AND OPEN END,COMBINATION Combination Wrench,1-7/16In,18-1/2In OAL NIIN 00-228-9519, 1, EA; LI 148: 15J639 TAP,THREAD CUTTING Hand Tap,#8-32UNC,Bright NIIN 00-232-1974, 2, EA; LI 149: 1AK06 SOCKET,SOCKET WRENCH Socket,3/8 In Dr,5/16 In,12 Pt,Std NIIN 00-232-5711, 7, EA; LI 150: 6C962 RASP, HAND Half Round File,14 In,Second,Pipeliner NIIN 00-233-9713, 2, EA; LI 151: 10Z722 RASP, HAND Cabinet Rasp File,Second,Half Rnd,10 In NIIN 00-233-9717, 3, EA; LI 152: 3R139 CHISEL,COLD,HAND Cold Chisel,1/4 In. x 4-7/8 In. NIIN 00234-1927, 28, EA; LI 153: 4HAN9 DRILL, TWIST Taper Shank Drill,17/64,#1MT,Black Oxide NIIN 00-234-5140, 5, EA; LI 154: 1G596 FILE, HAND Three Square File,6 In,Smooth,American NIIN 00-234-6522, 6, EA; LI 155: 1G590 FILE, HAND Three Square File,8 In,Smooth,American NIIN 00-234-6529, 2, EA; LI 156: 1AKA6 FILE, HAND Hand File,10 In,0.375 In Dia,Second Cut NIIN 00-234-6555, 2, EA; LI 157: 1AKA9 FILE, HAND Hand File,12 In,0.500 In Dia,Smooth Cut NIIN 00-234-6559, 1, EA; LI 158: 1G736 FILE, HAND Half Round File,10 In,Second,American NIIN 00-234-6570, 4, EA; LI 159: 1AK14 SOCKET,SOCKET WRENCH Socket,3/8 In Dr,13/16 In,12 Pt,Std NIIN 00-235-5807, 4, EA; LI 160: 1AF75 SOCKET,SOCKET WRENCH Socket,1/4 In Dr,7/16 In,12 Pt,Std NIIN 00-235-5869, 16, EA; LI 161: 1AK36 SOCKET,SOCKET WRENCH Socket,3/8 In Dr,3/4 In,12 Pt,Deep NIIN -00235-5879, 3, EA; LI 162: 1AF70 SOCKET,SOCKET WRENCH Socket,1/4 In Dr,1/4 In,12 Pt,Std NIIN 00-236-2264, 19, EA; LI 163: 3r146 CHISEL, COLD HAND Cold Chisel,7/8 In. x 8 In NIIN 00-236-3273, 15, EA; LI 164: 2mrd2 HAMMER, HAND Brick Hammer,16 Oz,Wood Handle NIIN 00-236-3730, 6, EA; LI 165: 4TDF2 SOCKET,SOCKET WRENCH Flex Socket,3/8 In Dr,9/16 In,12 Pt,Std NIIN 00-237-0978, 2, EA; LI 166: 4TDF4 SOCKET,SOCKET WRENCH Flex Socket,3/8 In Dr,11/16 In,12 Pt,Std NIIN 00-237-0979, 2, EA; LI 167: 4TDF5 SOCKET,SOCKET WRENCH Flex Socket,3/8 In Dr,3/4 In,12 Pt,Std NIIN 00-237-0980, 2, EA; LI 168: 10T712 DIE,THREAD CUTTING HSS Rd Adj Thread Die,13/16In,3,48 Pitch NIIN 00-239-2774, 1, EA; LI 169: 10T714 DIE,THREAD CUTTING HSS Rd Adj Thread Die,13/16In,4,40 Pitch NIIN 00-239-2775, 1, EA; LI 170: 20X632 DIE,THREAD CUTTING Rd Adjustable Die,Steel,5-40 NIIN 00-239-2776, 1, EA; LI 171: 20X633 DIE,THREAD CUTTING Rd Adjustable Die,Steel,6-32 NIIN 00-239-2777, 1, EA; LI 172: 20X635 DIE,THREAD CUTTING Rd Adjustable Die,Steel,8-32 NIIN 00-239-2778, 1, EA; LI 173: 20X701 DIE,THREAD CUTTING Rd Adjustable Die,HSS,#12-24 NIIN 00-239-2780, 1, EA; LI 174: 20K388 HANDLE,SOCKET WRENCH Speeder Handle,3/8 Dr x 16-3/4 In,Chrome NIIN 00-237-4969, 8, EA; LI 175: 4a848 SCREWDRIVER,CROSS TIP Screwdriver,Phillips,#2 x 4,Cushion NIIN 00-237-8173, 5, EA; LI 176: 5ll56 SCREWDRIVER,CROSS TIP Screwdriver,Phillips,#2 x 7 NIIN 00-237-8174, 8, EA; LI 177: 20X670 DIE,RETHREADING Hex Rethreading Bolt Die,Steel,3/8,24 NIIN 00-237-8272, 8, EA; LI 178: 20X672 DIE,RETHREADING Hex Rethreading Bolt Die,Steel,7/16-20 NIIN 00-237-8273, 8, EA; LI 179: 20X674 DIE,RETHREADING Hex Rethreading Bolt Die,Steel,1/2-20 NIIN 00-237-8274, 8, EA; LI 180: 5NAF8 SCRAPER,BEARING Machinists Scraper,4 In,Hollow Ground NIIN 00-237-8702, 8, EA; LI 181: 13H073 FLE, HAND Square File,American,Bastard,12 In NIIN 00-238-9664, 4, EA; LI 182: 13H075 FLE, HAND Square File,American,Smooth,12 In NIIN 00-238-9666, 4, EA; LI 183: 1AF99 SOCKET,SOCKET WRENCH Socket,1/4 In Dr,7/16 In,6 Pt,Std NIIN 00-239-0016, 3, EA; LI 184: 1Q802 DRIFTPIN Brass Drift Punch NIIN 00-239-0037, 4, EA; LI 185: 2MPX8 SEAL STRAPPING Strapping Seal,3/4In,Snap-On Grit,PK1000 NIIN 00-239-5293, 2, EA; LI 186: 5ZV47 SEAL STRAPPING Strapping Seal,1-1/4 In.,Push,PK700 NIIN 00-239-5294, 2, EA; LI 187: 5XJT7 FILE, HAND Pillar File,Swiss,6 In,2 Cut NIIN 00-239-7626, 4, EA; LI 188: 5ZV47 DIE,RETHREADING Strapping Seal,1-1/4 In.,Push,PK700 NIIN 00-239-8240, 8, EA; LI 189: 2WDR2 HAMMER-BRUSH,WELDER'S Chipping Hammer w/Brush,Vertical,4.4 Oz NIIN 00-240-3096, 2, EA; LI 190: 1u228 EXTRACTOR,SCREW Extractor,Screw,#7 NIIN 00-240-5217, 3, EA; LI 191: 1u226 EXTRACTOR,SCREW Extractor,Screw,#6 NIIN 00-240-5220, 3, EA; LI 192: 1u220 EXTRACTOR,SCREW Extractor,Screw,#3 NIIN 00-240-5221, 4, EA; LI 193: 1u216 EXTRACTOR,SCREW Extractor,Screw,#1 NIIN 00-240-5223, 4, EA; LI 194: 3R100 SCREWDRIVER,OFFSET Offset Screwdriver,Slotted,3/8x6 1/8 In NIIN 00-240-5232, 16, EA; LI 195: 4RE25 KEY,SOCKET HEAD SCREW Hex Key,L,9/16 In,5-3/4 in. L NIIN 00-240-5268, 6, EA; LI 196: 4RE21 KEY,SOCKET HEAD SCREW Hex Key,L,5/16 In,3-3/4 in. L,PK5 NIIN 00-240-5274, 12, EA; LI 197: 3R357 WRENCH,ADJUSTABLE Adjustable Wrench,4 in.,Chrome,Plain NIIN 00-240-5330, 4, EA; LI 198: 6ATY6 WRENCH,ADJUSTABLE Spud Pipe Wrench,Cast Iron,12 in. NIIN 00-240-5336, 34, EA; LI 199: 1ANK1 WRENCH,OPEN END Open End Wrench,3/4 X 7/8,15 Deg,9-1/2L NIIN 00-240-5609, 2, EA; LI 200: 6DPV6 BAR, CHISEL Pinch Chisel Pry Bar,24 In NIIN 00-240-6031, 3, EA; LI 201: 6DKE4 BAR, PINCH Pinch Point Bar,14 In NIIN 00-240-6051, 4, EA; LI 202: 1Q742 ?PUNCH,DRIVE PIN Drive Pin Punch,1/16 x 4 1/8 In NIIN 00-240-6082, 4, EA; LI 203: 1Q738 ?PUNCH,DRIVE PIN Drive Pin Punch,1/4 x 5 3/4 In NIIN 00-240-6083, 4, EA; LI 204: 15X785 KNIFE,CRAFTSMAN'S Folding Knife,Hawk Bill,4 In,Brown/Rose NIIN 00-240-7070, 8, EA; LI 205: 1AH99 ADAPTER,SOCKET WRENCH Socket Adapter,1/2 F x 3/8 In M NIIN 00-240-8702, 5, EA; LI 206: 1AH97 ADAPTER,SOCKET WRENCH Socket Adapter,3/8 F x 1/2 In M NIIN 00-240-8703, 8, EA; LI 207: 3R158 PUNCH,ALIGNING Punch,Drift,5/16 In NIIN 00-240-8894, 2, EA; LI 208: 3R156 PUNCH,ALIGNING Punch,Drift,7/32 In NIIN 00-240-8896, 2, EA; LI 209: 3R154 PUNCH,ALIGNING Punch,Drift,1/8 In NIIN 00-240-8898, 1, EA; LI 210: 1AM37 HANDLE,SOCKET WRENCH Handle,T,13 In NIIN 00-241-3142, 3, EA; LI 211: 4RE56 KEY,SOCKET HEAD SCREW Hex Key,L,7/32 In,4-7/8 in. L,PK10 NIIN 00-241-3179, 3, EA; LI 212: 4RE57 KEY,SOCKET HEAD SCREW Hex Key,L,1/4 In,5-1/4 in. L,PK10 NIIN 00-241-3180, 3, EA; LI 213: 4RE57 KEY,SOCKET HEAD SCREW Hex Key,L,1/4 In,5-1/4 in. L,PK10 1AF98 SOCKET,SOCKET WRENCH Socket,1/4 In Dr,3/8 In,6 Pt,Std NIIN 00-241-3186, 19, EA; LI 214: 4JA36 NUTDRIVER Nut Driver,Hollow,Magnetic,1/4 In,3 In NIIN 00-241-3188, 18, EA; LI 215: 1g600 FILE, HAND Three Square File,6 In,Bastard/Double NIIN 00-241-7675, 4, EA; LI 216: 6a628 FILE, HAND Mill File,8 In,Smooth/Single,American NIIN 00-241-9135, 6, EA; LI 217: 6a626 FILE, HAND Half Round File,6 In,Bastard,American NIIN 00-9147, 6, EA; LI 218: 2a499 FILE, HAND Half Round File,8 In,Bastard,American NIIN 00-241-9150, 4, EA; LI 219: 1g738 FILE, HAND Half Round File,8 In,Second,American NIIN 00-241-9151, 2, EA; LI 220: 1G732 FILE, HAND Half Round File,12 In,Smooth,American NIIN 00-241-9156, 4, EA; LI 221: 13H035 FILE, HAND Mill File,American,Smooth,Rect,14 In NIIN 00-241-9166, 4, EA; LI 222: 3R157 PUNCH, ALIGNING Punch,Drift,1/4 In NIIN 00-242-0763, 2, EA; LI 223: 1AF55 HANDLE,SOCKET WRENCH Driver,Socket,6 3/4 In NIIN 00-242-3256, 16, EA; LI 224: 1AK15 SOCKET,SOCKET WRENCH Socket,3/8 In Dr,7/8 In,12 Pt,Std NIINJ 00-242-3330, 8, EA; LI 225: 6RCC0 SOCKET,SOCKET WRENCH Socket,1/4 In Dr,9/32 In,12 Pt,Std NIIN 00-242-3345, 19, EA; LI 226: 1AN15 SOCKET,SOCKET WRENCH Socket,1/2 In Dr,3/4 In,12 Pt,Deep NIIN 00-242-3349, 3, EA; LI 227: 6RCC1 SOCKET,SOCKET WRENCH Socket,1/4 In Dr,11/32 In,12 Pt,Std NIIN 00-242-3351, 16, EA; LI 228: 1Q745 PUNCH, DRIVE Drive Pin Punch,3/32 x 4 1/2 In NIIN 00-242-3435, 1, EA; LI 229: 6GRT4 HAMMER, HAND Blacksmith Hammer,3 Lb,15 In,Hickory NIIN 00-242-3915, 4, EA; LI 230: 4RE13 KEY,SOCKET HEAD SCREW Hex Key,L,3/32 In,2 in. L,PK10 NIIN 00-242-7410, 28, EA; LI 231: 4RE19 KEY,SOCKET HEAD SCREW NIIN 00-242-7411, 9, EA; LI 232: 1AH74 EXTENSION,SOCKET WRENCH Socket Extension,3/8 x 3 In,Chrome NIIN 00-243-1689, 3, EA; LI 233: 1AH77 EXTENSION,SOCKET WRENCH Socket Extension,3/8 x 12 In,Chrome NIIN 00-243-1691, 6, EA; LI 234: 1AM39 EXTENSION,SOCKET WRENCH Socket Extension,1/2 x 2-1/2 In,Chrome NIIN 00-243-1697, 2, EA; LI 235: 3ZUN5 COUNTERSINK Countersink,6 Fl,82 Deg,3/8,Cobalt NIIN 00-243-2308, 1, EA; LI 236: 2ZUW3 RULE,MACHINIST'S Steel Rule,Spring Tempered,18 In,4R Grad NIIN 00-243-3367, 3, EA; LI 237: 1AM40 EXTENSION,SOCKET WRENCH Socket Extension,1/2 x 5 In,Chrome NIIN 00-243-7326, 10, EA; LI 238: 1AH90 SCREWDRIVER Socket Bit,3/8 Dr,1/4 In,Slotted NIIN 00-243-7337, 10, EA; LI 239: 1AN19 SOCKET,SOCKET WRENCH Socket,1/2 In Dr,1 In,12 Pt,Deep NIIN 00-243-7340, 4, EA; LI 240: 1AN20 SOCKET,SOCKET WRENCH Socket,1/2 In Dr,1-1/16 In,12 Pt,Deep NIIN 00-243-7341, 4, EA; LI 241: 1AN11 SOCKET,SOCKET WRENCH Socket,1/2 In Dr,1/2 In,12 Pt,Deep NIIN 00-243-7351, 3, EA; LI 242: 3UW33 BRUSH, PAINT Paint Brush,1in.,8-3/4in. NIIN 00-245-4509, 20, EA; LI 243: 2zve1 GAGE, THICJNESS Thickness Gage,13 Straight Leaves NIIN 00-246-2303, 1, EA; LI 244: 2AJR1 BRUST, ARTIST Artist Brush,Water Colors,1/8in.,7-1/2in NIIN 00-246-8503, 4, EA; LI 245: 2AJR2 BRUST, ARTIST Artist Brush,Water Colors,1/4in.,7-1/2in NIIN 00-246-8505, 4, EA; LI 246: 3G965 TWEEZERS,CRAFTSMAN'S Tweezer,4.25 In L,Sharp,Narrow NIIN 00-247-0867, 2, EA; LI 247: 20K386 HANDLE,SOCKET WRENCH Speeder Handle,1/2 Dr x 21 In,Chrome NIIN 00-249-1071, 5, EA; LI 248: 5XJY1 FILE, HAND Flat File,Bastard,American,8 In NIIN 00-249-2848, 2, EA; LI 249: 6A627 FILE, HAND Half Round File,12 In,Bastard,American NIIN 00-252-4015, 10, EA; LI 250: 6NRD1 GAGE, FILLET Radius Gage Set,1/32 to 1/4,30 Leaves NIIN 00-273-9867, 9, EA; LI 251: 4ahp7 TAP,THREAD CUTTING Hand Tap,5/16-18UNC,Uncoated NIIN 00-276-1031, 2, EA; LI 252: 4aht5 TAP,THREAD CUTTING Hand Tap,3/8-16UNC,Uncoated NIIN 00-276-1032, 1, EA; LI 253: 1ANP6 RATCHET ATTACHMENT,SOCKET WRENCH Ignition Wrench,7/32 x 1/4 in.,15/60 Deg NIIN 00-277-1207, 2, EA; LI 254: 1ez16 WRENCH,PIPE Offset Pipe Wrench,Aluminum,24 in. L NIIN 00-277-1462, 1, EA; LI 255: 5LL66 NUTDRIVER Nut Driver,7/16 In,3 In Shank,Cushion NIIN 00-277-1801, 10, EA; LI 256: 3R932 NUTDRIVER Nut Driver 9/32 In NIIN 00-277-1802, 14, EA; LI 257: 1ANF8 WRENCH, OPEN Open End Wrench,3/16x1/4,15 Deg,3-7/8 L NIIN 00-277-2311, 2, EA; LI 258: 1ANH1 WRENCH, OPEN Open End Wrench,3/8x7/16,15 Deg,5-3/4 L NIIN 00-277-2342, 19, EA; LI 259: 1AK35 SOCKET,SOCKET WRENCH Socket,3/8 In Dr,11/16 In,12 Pt,Deep NIIN 00-277-4252, 3, EA; LI 260: 2R536 BLADE,HAND HACKSAW Hs Hacksaw Blade Pk10 NIIN 00-277-4587, 32, EA; LI 261: 5R850 BLADE,HAND HACKSAW Hacksaw Blade,10 In,24 TPI,Bi-metal NIIN 00-277-4588, 14, EA; LI 262: 24C980 BLADE,HAND HACKSAW Hack Saw Blade,Bi-Metal,10x1/2 In,32 TPI NIIN 00-277-4589, 25, EA; LI 263: 5R854 BLADE,HAND HACKSAW Hacksaw Blade,12 In,32 TPI,Bi-metal NIIN 00-277-4592, 43, EA; LI 264: 1ANH8 WRENCH, OPEN Open End Wrench,5/8x11/16,15 Deg,8-1/4 L NIIN 00-277-8301, 3, EA; LI 265: 18DU58 CASE,TWIST DRILL Drill Bit Case,Jobber Length,Steel NIIN 00-277-8836, 14, EA; LI 266: 3R219 PLIERS, SLIP Angle Nose Plier,5 1/4 In NIIN 00-278-0350, 12, EA; LI 267: 3R236 PLIERS, SLIP Plier,Tongue/Groove NIIN 00-278-0351, 11, EA; LI 268: 6C231 BEVEL,SLIDING T Sliding T Bevel NIIN 00-278-0645, 2, EA; LI 269: 6CMD2 SCREWDRIVER,FLAT TIP Slotted Screwdriver,7/32 x 12 In NIIN 00-278-1268, 2, EA; LI 270: 3EJU2 SCREWDRIVER,FLAT TIP Slotted Screwdriver,SS,9/64 In Tip NIIN 00-278-1269, 18, EA; LI 271: 6C260 SCREWDRIVER,FLAT TIP Screwdriver,Slotted,3/8x12 In NIIN 00-278-1276, 25, EA; LI 272: 3XG68 STRAPPING Steel Strapping,17 mil,2910 ft. L NIIN 00-286-8565, 2, EA; LI 273: 36A163 WRENCH, BOX Double Box End Wrench,12 Pt,7/16 x1/2 In NIIN 00-287-4527, 2, EA; LI 274: 1APC4 WRENCH, SPAN Adjustable Hook Spanner Wrench,11/32x1/8 NIIN 00-288-6468, 4, EA; LI 275: 23Z407 EXTRACTOR,LAMP Lamp Extractor,Plastic,1/2 x 4 In NIIN 00-288-7679, 16, EA; LI 276: 6C270 SCREWDRIVER,FLAT TIP Screwdriver,Slotted,1/4x1 1/2 In,Plastic NIIN 00-288-7803, 4, EA; LI 277: 1AK05 SOCKET,SOCKET WRENCH Socket,3/8 In Dr,1/4 In,12 Pt,Std NIIN 00-288-8155, 3, EA; LI 278: 1ED82 PUNCH AND DIE,KNOCKOUT Punch,Knockout,1/2in NIIN 00-288-8737, 2, EA; LI 279: 1AMN3 WRENCH, BOX Box End Wrench,5/8 x 3/4 in.,6-1/8 in. L NIIN 00-288-9302, 1, EA; LI 280: 3R095 SCREWDRIVER,OFFSET Offset Screwdriver,Phillips #1,#2 NIIN 00-288-9710, 27, EA; LI 281: 1UDU3 WRENCH,BOX AND OPEN END,COMBINATION Combination Wrench,1/4In.,3-17/64In. OAL NIIN 00-288-9997, 6, EA; LI 282: 3w639 DIE SET,METAL STAMPING,HAND Number Set,1/4 In. H,Steel NIIN 00-289-0002, 3, EA; LI 283: 3w639 DIE SET,METAL STAMPING,HAND Number Set,1/4 In. H,Steel NIIN 00-289-0003, 3, EA; LI 284: 3w639 DIE SET,METAL STAMPING,HAND Number Set,1/4 In. H,Steel NIIN 00-289-0004, 2, EA; LI 285: 5C629 PLIERS,RETAINING RING Retaining Ring Plier,0.115 In,External NIIN 00-293-0047, 1, EA; LI 286: 5ZL59 JACK, HYDRAULIC Pump/Standard Cylinder Set,10 Ton Cap NIIN 00-293-0078, 2, EA; LI 287: 4RE48 KEY,SOCKET HEAD SCREW Hex Key,L,5/64 In,3-13/64 in. L,PK10 NIIN 00-293-0080, 5, EA; LI 288: 1AP52 SOCKET,SOCKET WRENCH Socket,3/4 In Dr,1-1/2 In,12 Pt,Std NIIN 00-293-0094, 2, EA; LI 289: 4A736 PUNCH AND DIE,KNOCKOUT Punch,Knockout,Round,7/8 In NIIN 00-293-0107, 2, EA; LI 290: 1AH93 SCREWDRIVER ATTACHMENT,SOCKET WRENCH Socket Bit,3/8 Dr,#2,#2 Phillips NIIN 00-293-0318, 14, EA; LI 291: 3R155 PUNCH,ALIGNING Punch,Drift,3/16 In NIIN 00-293-0448, 6, EA; LI 292: 4ahp8 TAP,THREAD CUTTING Hand Tap,5/16-18UNC,Uncoated NIIN 00-293-0712, 2, EA; LI 293: 1cll3 NUTDRIVER Nut Driver,Hex 11/32 In,Green,Steel NIIN -00-293-0796, 8, EA; LI 294: 1Q743 PUNCH,STARTER Drive Pin Punch,3/16 x 5 1/4 In NIIN 00-293-1408, 2, EA; LI 295: 4RE47 KEY,SOCKET HEAD SCREW Hex Key,L,1/16 In,3 in. L,PK10 NIIN 00-293-1476, 5, EA; LI 296: 6R303 BAR, WRECKING Ripping Bar 5/8 X 17 In NIIN 00-293-2384, 4, EA; LI 297: 6d054 FACE,HAMMER,INSERTED Hammer Tip,1 In Dia,Tough,Green NIIN 00-293-2999, 13, EA; LI 298: 6d053 FACE,HAMMER,INSERTED Hammer Tip,1 In Dia,Medium,Red NIIN 00-293-3007, 20, EA; LI 299: 6C261 SCREWDRIVER,FLAT TIP Screwdriver,Slotted,1/4x6 In NIIN 00-293-3171, 4, EA; LI 300: 6C256 SCREWDRIVER,FLAT TIP Screwdriver,Slotted,1/4x4 In,Plastic NIIN 00-293-3183, 4, EA; LI 301: 5C553 ?MALLET,RAWHIDE Rawhide Mallet,Hardwood,6 Oz NIIN0-00-293-3398, 1, EA; LI 302: 3R101 PUNCH, CENTER Center Punch,4-3/4 L x 1/4 In Hex NIIN 00-293-3509, 1, EA; LI 303: 2R480 PUNCH, CENTER Center Punch 1/4 In NIIN 00-293-3510, 4, EA; LI 304: 3R102 PUNCH, CENTER Center Punch,4 5/8 L x 5/16 In Hex NIIN 00-293-3512, 2, EA; LI 305: 3R950 NUTDRIVER Nut Driver 9/16 In NIIN 00-294-9514, 2, EA; LI 306: 2DGN8 KEY SET,SOCKET HEAD SCREW Hex Key Set,0.050 - 5/32 In.,Fold-Up NIIN 00-439-8988, 1, EA; LI 307: 2ZUC3 BALL ATTACHMENT,MIC Micrometer Ball Attachment,0.250 In Dia NIIN 00-494-1739, 1, EA; LI 308: 4EAC1 CLAMP, PLIER Locking Plier,Straight,7 In NIIN 00-494-1895, 1, EA; LI 309: 3MD30 FILE, THREAD Thread Restoring File,X-Fine/X-Course NIIN 00-516-3812, 9, EA; LI 310: 2R639 GAGE, THICKNESS Go-No-Go Feeler Gauge,22 Blades NIIN 00-517-8096, 10, EA; LI 311: 3ZG91 PUNCH,CUTTING,DOUBLE BOW NIIN 00-541-7697, 8, EA; LI 312: 1AM21 HANDLE,SOCKET WRENCH Quick Release Ratchet,1/2 In Dr,16 In L NIIN 00-541-8444, 2, EA; LI 313: 6C243 SCREWDRIVER,CROSS TIP Screwdriver,Phillips,#2 x 10,Plastic NIIN 00-542-3438, 7, EA; LI 314: 4a856 STRIPPER,WIRE,HAND Wire Stripper/Cutter,6 In,22-30AWG NIIN 00-542-4487, 1, EA; LI 315: 5ME50 PULLER,NAIL,HAND Nail Puller,12 In L NIIN 00-542-4828, 1, EA; LI 316: 1V717 DRILL SET,TWIST Jobber Drill Set,20 PC,Wire,HSS,118 Deg NIIN 00-555-1528, 10, EA; LI 317: 1AP34 SCREWDRIVER ATTACHMENT,SOCKET WRENCH Socket Extension,3/4 x 4 In,Chrome NIIN 00-555-2353, 1, EA; LI 318: 3WCR1 TWEEZERS,CRAFTSMAN'S Industrial Tweezers,Sharp Point,4 1/2 In NIIN 00-565-3000, 2, EA; LI 319: 1u218 EXTRACTOR,SCREW Extractor,Screw,#2 NIIN 00-580-2359, 4, EA; LI 320: 4ahm3 TAP,THREAD CUTTING Hand Tap,#6-32UNC,Uncoated NIIN 00-580-7316, 2, EA; LI 321: 4ahw2 TAP,THREAD CUTTING Hand Tap,7/16-14UNC,Uncoated NIIN 00-580-7335, 2, EA; LI 322: 4ahw4 TAP,THREAD CUTTING Hand Tap,7/16-14UNC,Uncoated NIIN 00-580-7353, 1, EA; LI 323: 4a099 HAMMER,HAND Hammer,Hickory Handle NIIN 00-585-2383, 1, EA; LI 324: 4ahn1 TAP,THREAD CUTTING Hand Tap,#10-24UNC,Uncoated NIIN 00-585-6760, 2, EA; LI 325: 13H905 KNIFE, CRAFTSMAN Precision Knife Set,Blk/Ylw,22 Pc NIIN 00-595-8400, 10, EA; LI 326: 1yug2 SCREWDRIVER,CROSS TIP Insulated Phillips Screwdriver,#1 NIIN 00-596-0863, 2, EA; LI 327: 4cz91 SCREWDRIVER,CROSS TIP Screwdriver,Phillips,Nonsparking#3x6 NIIN 00-596-0865, 2, EA; LI 328: 5HM40 SCREWDRIVER,CROSS TIP Screwdriver,#2 Phillips x 1 1/2 In NIIN 00-596-0866, 5, EA; LI 329: 1AL71 SCREWDRIVER ATTACHMENT,SOCKET WRENCH Socket Bit,3/8 Dr,3/8 In,Hex NIIN 00-596-1199, 1, EA; LI 330: 3R940 NUTDRIVER Nut Driver 3/8 In NIIN 00-596-1263, 18, EA; LI 331: 1AL67 SCREWDRIVER ATTACHMENT,SOCKET WRENCH Socket Bit,3/8 Dr,7/32 In,Hex NIIN 00-596-8511, 1, EA; LI 332: 2RDW8 SCREWDRIVER,FLAT TIP Slotted Screwdriver,1/4 In Tip,3 3/4 L NIIN 00-596-9364, 2, EA; LI 333: 23Z277 CHISEL,FIRMER High Impact Hand Chisel,1/2 x 3-5/8 In NIIN 00-640-5421, 4, EA; LI 334: 1AL65 SCREWDRIVER ATTACHMENT,SOCKET WRENCH Socket Bit,3/8 Dr,3/16 In,Hex NIIN 00-683-8597, 1, EA; LI 335: 1AL70 SCREWDRIVER ATTACHMENT,SOCKET WRENCH Socket Bit,3/8 Dr,5/16 In,Hex NIIN 00-683-8602, 1, EA; LI 336: 4hf61 TAP,THREAD CUTTING Hand Tap,#3-48UNC,Uncoated NIIN 00-729-5687, 2, EA; LI 337: 4ahl5 TAP,THREAD CUTTING Hand Tap,#4-40UNC,Uncoated NIIN 00-729-5689, 2, EA; LI 338: 4ahn8 TAP,THREAD CUTTING Hand Tap,1/4-20UNC,Uncoated NIIN 00-729-5693, 2, EA; LI 339: 4ahm6 TAP,THREAD CUTTING Hand Tap,#8-32UNC,Uncoated NIIN 00-729-5694, 2, EA; LI 340: 4ahm2 TAP,THREAD CUTTING Hand Tap,#6-32UNC,Uncoated NIIN 00-729-5695, 2, EA; LI 341: 3R244 PLIERS,SLIP JOINT Plier,Tongue/Groove NIIN 00-781-0819, 3, EA; LI 342: 2ZPF6 GAGE,THICKNESS Feeler Gauge,32 Blade,0.0015 to 0.035 In NIIN 00-804-2660, 1, EA; LI 343: 6R155 SQUARE,CARPENTER'S Carpenters Square,Alum,24 x 16 In NIIN 00-810-3490, 13, EA; LI 344: 6C237 SCREWDRIVER,CROSS TIP Screwdriver,Phillips,#0 x 2 3/4,Plastic NIIN 00-820-2995, 3, EA; LI 345: 4ahm1 TAP,THREAD CUTTING Hand Tap,#6-32UNC,Uncoated NIIN 00-821-1027, 2, EA; LI 346: 4gp98 TAP,THREAD CUTTING Hand Tap,#12-24UNC,Uncoated NIIN 00-821-1030, 2, EA; LI 347: 4ahm5 TAP,THREAD CUTTING Hand Tap,#8-32UNC,Uncoated NIIN 00-825-0332, 2, EA; LI 348: 6R271 HAMMER, HAND Ball Pein Hammer,Hickory,40 Oz NIIN 00-900-6111, 2, EA; LI 349: 4R447 HOLDER,INSERTED HAMMER FACE Soft Face Hammer W/O Tip,1.85Lb,2 1/2 In NIIN 00-903-8556, 2, EA; LI 350: 4R443 HOLDER,INSERTED HAMMER FACE Soft Face Hammer W/O Tip,1.05 Lb,2 In NIIN 00-903-9310, 2, EA; LI 351: 2cyx8 IGNITER,FRICTION Single Flint Lighter,w/ 5 Flint Renewals NIIN 00-965-0326, 9, EA; LI 352: 2cyx8 FLINT TIP,FRICTION IGNITER Single Flint Lighter,w/ 5 Flint Renewals NIIN 00-965-0603, 1, EA; LI 353: 4EAA7 WRENCH,PLIER Locking Plier,Straight,10 In NIIN 00-965-0604, 1, EA; LI 354: 4RE53 KEY,SOCKET HEAD SCREW Hex Key,L,9/64 In,4 in. L,PK10 NIIN 00-984-0247, 3, EA; LI 355: 4CHV6 WRENCH, PLIER Locking Plier,Straight,10 In NIIN 01-176-6931, 3, EA; LI 356: 3XA70 ETCHER, ELECTRIC Engraver,Electric NIIN 01-336-5533, 1, EA; LI 357: 2DGN4 WRENCH, RATCHET Ratcheting Wrench,3/16-3/8 in. sq. NIIN 01-419-4365, 1, EA; LI 358: 40L721 CALIPER, OUTSIDE Outside Spring Caliper,Range 4 In. NIIN 01-434-9758, 6, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, NAVSEA SUPSHIP - Newport News intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. A Seller may submit a series of pricing quotes, which descend in price during the specified period of time for the aforementioned reverse auction. NAVSEA SUPSHIP - Newport News is taking this action in an effort to improve both seller access and awareness of requests and the agency's ability to gather multiple, completed, real-time quotes.All responsible Sellers that respond to this solicitation MUST submit the pricing portion of their quote using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a quote on www.FedBid.com.Sellers that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Sellers that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at [email protected]. Sellers may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith quotes, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should Sellers require additional clarification, contact FedBid at 877-9FEDBID (877-933-3243) or [email protected]. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. No partial shipments are permitted unless specifically authorized at the time of award. Sellers must comply with the applicable FAR Clauses listed: 52.204-99, 52.212-3 Offeror Representations and Certifications ? commercial Items, 52.213-4 Full Text, 52.222-3, 52.232-33, 52.232.99, 52.246-16, 252.246-7000, 52.212-4, 52.212-5, 252.232-7003, 52.225-1. For labor only, NOT materials, the following FAR Clauses apply: 52.222-21, 52.222-26, 52.225-12, 52.233-3. For credit card 52.232-36, for purchases over 25,000, 52.204-10. https://www.acquisition.gov/far/
Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822, Email: [email protected];
