CVN-78 TOOLS
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is N62793-14-R-A135 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-74. The associated North American Industrial Classification System (NAICS) code for this procurement is 332216 with a small business size standard of 0.00 employees.This requirement is a [ Service-Disabled Veteran Owned ] set-aside and only qualified offerors may submit quotes.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-07-11 11:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be SUFFOLK, VA 23435 The NAVSEA SUPSHIP - Newport News requires the following items, Exact Match Only, to the following: LI 001: 13G974 SCREWDRIVER Screwdriver,Keystone,1/4 x 24 In,Chrome, 1, EA; LI 002: 10Z822 PLIERS, SLIP Tongue/Groove Pliers,Smooth,10 ln,Blue, 3, EA; LI 003: 3R484 HAMMER, HAND Ball Pein Hammer,12 Oz, 23, EA; LI 004: 1FX40 ?KEY SET,SOCKET HEAD SCREW Hex Key Set,1.5 - 10mm,L-Shaped,Short, 4, EA; LI 005: 4TDE9 SOCKET,SOCKET WRENCH Flex Socket,3/8 In Dr,7/16 In,12 Pt,Std, 2, EA; LI 006: 3R095 SCREWDRIVER,OFFSET Offset Screwdriver,Phillips #1,#2, 3, EA; LI 007: 2AJK9 (SET) PUNCH,CUTTING,DOUBLE BOW, 1/2 SET Arch Punch Set,1/4 To 1 In,7 Pc, 10, EA; LI 008: 2AJK9 (SET) PUNCH,CUTTING,DOUBLE BOW, 5/8 SET Arch Punch Set,1/4 To 1 In,7 Pc, 10, EA; LI 009: 2AJK9 (SET) PUNCH,CUTTING,DOUBLE BOW, 3/4 SET Arch Punch Set,1/4 To 1 In,7 Pc, 10, EA; LI 010: 2AJK9 (SET) PUNCH,CUTTING,DOUBLE BOW, 7/8 SET Arch Punch Set,1/4 To 1 In,7 Pc, 10, EA; LI 011: 2AJK9 (SET) PUNCH,CUTTING,DOUBLE BOW, 1 in SET Arch Punch Set,1/4 To 1 In,7 Pc, 10, EA; LI 012: 1Q740 PUNCH,CUTTING,SINGLE BOW Punch,Drive Pin,1/8 In, 6, EA; LI 013: 1Q738 PUNCH,CUTTING,SINGLE BOW Drive Pin Punch,1/4 x 5 3/4 In, 11, EA; LI 014: 1Q746 PUNCH,CUTTING,SINGLE BOW Drive Pin Punch,5/16 x 6 3/8 In, 11, EA; LI 015: 49L978 FINGER,MECHANICAL Mechanical Fngr Rtrvr,Flxbl Jaw,23-1/2In, 1, EA; LI 016: 24N405 CHISEL,PARING Socket Chisel,1 In. x 9 In., 1, EA; LI 017: 633048 SWAGE,TOP,BLACKSMITH'S, 1, EA; LI 018: 3R213 PLIERS Duckbill Plier, 3, EA; LI 019: 20X666 DIE, RETHREADING Hex Rethreading Bolt Die,Steel,1/4-28, 8, EA; LI 020: 1FX51 CROWFOOT ATTACHMENT,SOCKET WRENCH Crowfoot Wrench,Flare,3/8Dr,11/16 In, 4, EA; LI 021: 1AM79 SOCKET,SOCKET WRENCH Socket,1/2 In Dr,1-1/8 In,12 Pt,Std, 3, EA; LI 022: 1AH07 SOCKET,SOCKET WRENCH Socket,1/4 In Dr,5/16 In,6 Pt,Deep, 3, EA; LI 023: 1AM63 SOCKET,SOCKET WRENCH Socket,1/2 In Dr,7/16 In,12 Pt,Std, 4, EA; LI 024: 1AM65 SOCKET,SOCKET WRENCH Socket,1/2 In Dr,9/16 In,12 Pt,Std, 4, EA; LI 025: 1AM75 SOCKET,SOCKET WRENCH Socket,1/2 In Dr,15/16 In,12 Pt,Std, 1, EA; LI 026: 1AF76 SOCKET,SOCKET WRENCH Socket,1/4 In Dr,1/2 In,12 Pt,Std, 18, EA; LI 027: 1N684 DRILL TWIST Taper Shank Drill,5/32,#1MT,Blk Oxide, 5, EA; LI 028: 1F579 DRILL TWIST Jobber Bit,#5,High Speed Steel, 1, EA; LI 029: 1F589 DRILL TWIST Jobber Bit,#10,High Speed Steel, 1, EA; LI 030: 1F599 DRILL TWIST Jobber Bit,#15,High Speed Steel, 1, EA; LI 031: 1F601 DRILL TWIST Jobber Bit,#16,High Speed Steel, 1, EA; LI 032: 1F611 DRILL TWIST Jobber Bit,#21,High Speed Steel, 1, EA; LI 033: 1F615 DRILL TWIST Jobber Bit,#23,High Speed Steel, 1, EA; LI 034: 1F617 DRILL TWIST Jobber Bit,#24,High Speed Steel, 1, EA; LI 035: 1F619 DRILL TWIST Jobber Bit,#25,High Speed Steel, 1, EA; LI 036: 1F625 DRILL TWIST Jobber Bit,#28,High Speed Steel, 1, EA; LI 037: 1F629 DRILL TWIST Jobber Bit,#30,High Speed Steel, 1, EA; LI 038: 1F637 DRILL TWIST Jobber Bit,#34,High Speed Steel, 1, EA; LI 039: 1F673 DRILL TWIST Jobber Bit,#52,High Speed Steel, 1, EA; LI 040: 1F675 DRILL TWIST Jobber Bit,#53,High Speed Steel, 1, EA; LI 041: 1F681 DRILL TWIST Jobber Bit,#56,High Speed Steel, 1, EA; LI 042: 1F689 DRILL TWIST Jobber Bit,#60,High Speed Steel, 1, EA; LI 043: 4HAP1 DRILL TWIST Taper Shank Drill,19/64,#1MT,Black Oxide, 5, EA; LI 044: 1N712 DRILL TWIST Taper Shank Drill,11/32,#1MT,Blk Oxide, 9, EA; LI 045: 1N716 DRILL TWIST Taper Shank Drill,3/8,#1MT,Blk Oxide, 9, EA; LI 046: 4HAP4 DRILL TWIST Taper Shank Drill,25/64,#1MT,Black Oxide, 5, EA; LI 047: 1N720 DRILL TWIST Taper Shank Drill,13/32,#1MT,Blk Oxide, 9, EA; LI 048: 4HAP5 DRILL TWIST Taper Shank Drill,27/64,#1MT,Black Oxide, 5, EA; LI 049: 1N725 DRILL TWIST Taper Shank Drill,7/16,#1MT,Blk Oxide, 9, EA; LI 050: 4HAP6 DRILL TWIST Taper Shank Drill,29/64,#1MT,Black Oxide, 3, EA; LI 051: 4HAR1 DRILL TWIST Taper Shank Drill,37/64,#2MT,Black Oxide, 5, EA; LI 052: 3R106 PUNCH, CENTER Center Punch,6 1/4 L x 19/32 In Hex, 1, EA; LI 053: 20X671 DIE, RETHREADING Hex Rethreading Bolt Die,Steel,7/16-14, 9, EA; LI 054: 20X675 DIE, RETHREADING Hex Rethreading Bolt Die,Steel,9/16-12, 3, EA; LI 055: 20X679 DIE, RETHREADING, 3, EA; LI 056: 20X681 DIE, RETHREADING Hex Rethreading Bolt Die,Steel,7/8-9, 3, EA; LI 057: 20X678 DIE, RETHREADING Hex Rethreading Bolt Die,Steel,5/8-18, 2, EA; LI 058: 20X682 DIE, RETHREADING Hex Rethreading Bolt Die,Steel,7/8-14, 2, EA; LI 059: 20X684 DIE, RETHREADING, 2, EA; LI 060: 4RE22 KEY,SOCKET HEAD SCREW Hex Key,L,3/8 In,4-1/4 in. L,PK5, 20, EA; LI 061: 4RE24 KEY,SOCKET HEAD SCREW Hex Key,L,1/2 In,5-1/4 in. L, 9, EA; LI 062: 4RE10 KEY,SOCKET HEAD SCREW Hex Key,L,3/64 In,1-43/64 in. L,PK10, 19, EA; LI 063: 4RE60 KEY,SOCKET HEAD SCREW Hex Key,L,3/8 In,6-3/4 in. L,PK5, 1, EA; LI 064: 4RE58 KEY,SOCKET HEAD SCREW Hex Key,L,5/16 In,6 in. L,PK5, 3, EA; LI 065: 4RE55 KEY,SOCKET HEAD SCREW Hex Key,L,3/16 In,4-1/2 in. L,PK10, 31, EA; LI 066: 4RE50 KEY,SOCKET HEAD SCREW Hex Key,L,3/32 In,3-3/8 in. L,PK10, 7, EA; LI 067: 6C956 FILE, HAND Flat File,6 In,Smooth/Double,American, 1, EA; LI 068: 5XKE9 FILE, HAND Knife File, Smooth, American, 10 In, 1, EA; LI 069: 6C951 FILE, HAND Mill File,10In,Sq Edge,Second/Single, 2, EA; LI 070: 6A634 FILE, HAND Flat File,12 In,Smooth/Double,American, 1, EA; LI 071: 1G710 FILE, HAND Knife File,8 In,Second,American, 4, EA; LI 072: 6C954 FILE, HAND Flat File,14 In Length, 1, EA; LI 073: 1AKB3 FILE, HAND Hand File,10 In,0.375 In Sq,Bastard Cut, 4, EA; LI 074: 1TTW9 BRUSH, PAINT Paint Brush,#8,10-1/2in., 10, EA; LI 075: 3R296 SHEARS, METAL Straight Snips 8 In, 3, EA; LI 076: 20X630 DIESTOCK Round Die Stock, 1, EA; LI 077: 3LY74 NIPPERS, END End Cutting Nippers,7-1/2 In, 2, EA; LI 078: 6R587 AWL, SCRATCH Scratch Awl,7 1/4 In L, 17, EA; LI 079: 6NAY2 GAGE, SURFACE Surface Gage,3x2-9/16 In,5/16 Dia,9 In L, 15, EA; LI 080: 4CEN5 GAGE,DEPTH,RULE Rule Depth Gage,6 In,32nds/64ths, 4, EA; LI 081: 6NAZ8 GAGE,SCREW PITCH Screw Pitch Gage,27 Leaves,2.75-28 TPI, 2, EA; LI 082: 1AM33 HANDLE,SOCKET WRENCH Handle,Hinge,10 7/8 In, 4, EA; LI 083: 1AF43 HANDLE,SOCKET WRENCH Handle,Hinge,5 3/4 In, 10, EA; LI 084: 1AF44 HANDLE,SOCKET WRENCH Handle,T,4 1/2 In, 3, EA; LI 085: 1C054 WRENCH,RATCHET Ratcheting Wrench,Square/Hex, 4, EA; LI 086: 4RE50 HANDLE,SOCKET WRENCH Hex Key,L,3/32 In,3-3/8 in. L,PK10, 5, EA; LI 087: 3R144 CHISEL, COLD Cold Chisel,5/8 In. x 6-3/4 In., 5, EA; LI 088: 48Z983 CHISEL,SIDE CUTTING,HAND Side Strike Chisel,1 In. x 10-3/4 In., 3, EA; LI 089: 4RE27 KEY,SOCKET HEAD SCREW Hex Key,L,3/4 In,7-1/4 in. L, 3, EA; LI 090: 5c730 GAGE,CENTER Center Gage, 1, EA; LI 091: 1Q740 PUNCH, DRIVE Punch,Drive Pin,1/8 In, 3, EA; LI 092: 3R012 GAGE, THICKNESS Feeler Gauge Set,12 Blades,12 In, 1, EA; LI 093: 5ln36 TROWEL Brick Trowel,London,11 In,Softgrip, 4, EA; LI 094: 4VLV4 EXTRACTOR,STUFFING BOX AND PUMP PACKING Packing Extractor ,Removable,7 1/2 In. L, 8, EA; LI 095: 4VLV8 EXTRACTOR,STUFFING BOX AND PUMP PACKING Packing Extractor,Non-Removable,19 In. L, 4, EA; LI 096: 5C735 GAGE,SHEET AND PLATE Gage,Wire,#0-36 Range, 1, EA; LI 097: 3R549 BAR, PINCH Pry Bar,Aligning,24 In,23/32 In Flat End, 13, EA; LI 098: 3R186 PLIERS, SLIP Thin Nose Plier, 6, EA; LI 099: 4RE26 KEY,SOCKET HEAD SCREW Hex Key,L,5/8 In,6-1/4 in. L, 3, EA; LI 100: 1AMH8 WRENCH, BOX Box End Wrench,9/16 x 5/8 In,8-3/8 L, 3, EA; LI 101: 1AMN8 WRENCH, BOX Box End Wrench,3/4 X 7/8 in.,12-3/4 L, 1, EA; LI 102: 1amn9 WRENCH, BOX Box End Wrench,15/16 x 1 in.,14 in. L, 5, EA; LI 103: 4a098 HAMMER, HAND Riveting Hammer,16 Oz,Fiberglass, 2, EA; LI 104: 3ny48 HAMMER, HAND Hammer,Claw,16 Oz, 1, EA; LI 105: 4re20 KEY,SOCKET HEAD SCREW Hex Key,L,1/4 In,3-1/4 in. L,PK10, 10, EA; LI 106: 6C238 SCREWDRIVER Screwdriver,Phillips,#1 x 3,Plastic, 15, EA; LI 107: 3p281 CUTTER, HOLE Drill/Countersink Bit,60 Deg,#2,HSS,BRGT, 10, EA; LI 108: 2XUU6 DRIFT, DRILL Morse Taper Drift Tool,#2, #3, #4 & #5, 2, EA; LI 109: 2XUU6 DRIFT, DRILL Morse Taper Drift Tool,#2, #3, #4 & #6, 5, EA; LI 110: 4dc05 WEDGE, JOINT Flange Wedge,Nonsparking,4 x 3/4 In, 6, EA; LI 111: 1ak07 SOCKET,SOCKET WRENCH Socket,3/8 In Dr,3/8 In,12 Pt,Std, 5, EA; LI 112: 1ak13 SOCKET,SOCKET WRENCH Socket,3/8 In Dr,3/4 In,12 Pt,Std, 3, EA; LI 113: 5hm34 SCREWDRIVER,FLAT TIP Cabinet Screwdriver,3/16 x 6 In, 3, EA; LI 114: 1af67 ADAPTER,SOCKET WRENCH Socket Adapter,3/8 F x 1/4 In M, 8, EA; LI 115: 1ah75 EXTENSION,SOCKET WRENCH Socket Extension,3/8 x 6 In,Chrome, 10, EA; LI 116: 1F545 DRILL, TWIST Jobber Bit,1/2 In.,High Speed Steel, 1, EA; LI 117: 15J469 TAP,THREAD CUTTING Hand Tap,#4-40UNC,Bright, 2, EA; LI 118: 4HAT3 DRILL, TWIST Taper Shank Drill,59/64,#3MT,Black Oxide, 1, EA; LI 119: 1N777 DRILL, TWIST Taper Shank Drill,5/8,#2MT,Blk Oxide, 7, EA; LI 120: 1N799 DRILL, TWIST Taper Shank Drill,11/16,#2MT,Blk Oxide, 9, EA; LI 121: 1N807 DRILL, TWIST Taper Shank Drill,3/4,#2MT,Blk Oxide, 3, EA; LI 122: 4HAR7 DRILL, TWIST Taper Shank Drill,49/64,#2MT,Black Oxide, 3, EA; LI 123: 1N811 DRILL, TWIST Taper Shank Drill,25/32,#2MT,Blk Oxide, 5, EA; LI 124: 4HAR9 DRILL, TWIST Taper Shank Drill,53/64,#3MT,Black Oxide, 3, EA; LI 125: 1N823 DRILL, TWIST Taper Shank Drill,7/8,#3MT,Blk Oxide, 3, EA; LI 126: 4HAT2 DRILL, TWIST Taper Shank Drill,57/64,#3MT,Black Oxide, 3, EA; LI 127: 1N831 DRILL, TWIST Taper Shank Drill,15/16,#3MT,Blk Oxide, 3, EA; LI 128: 1N835 DRILL, TWIST Taper Shank Drill,31/32,#3MT,Blk Oxide, 5, EA; LI 129: 1N839 DRILL, TWIST Taper Shank Drill,1 In,#3MT,Blk Oxide, 3, EA; LI 130: 4HAT6 DRILL, TWIST Taper Shank Drill,1 1/64,#3MT,Blk Oxide, 3, EA; LI 131: 1N843 DRILL, TWIST Taper Shank Drill,1 1/32,#3MT,Blk Oxide, 3, EA; LI 132: 1N847 DRILL, TWIST Taper Shank Drill,1 1/16,#3MT,Blk Oxide, 4, EA; LI 133: 1N855 DRILL, TWIST Taper Shank Drill,1 1/8,#4MT,Blk Oxide, 4, EA; LI 134: 1N863 DRILL, TWIST Taper Shank Drill,1 3/16,#4MT,Blk Oxide, 5, EA; LI 135: 1AKW2 WRENCH,BOX AND OPEN END,COMBINATION Combination Wrench,5/16In.,5-3/8In. OAL, 9, EA; LI 136: 1AKW4 WRENCH,BOX AND OPEN END,COMBINATION Combination Wrench,3/8In.,6In. OAL, 11, EA; LI 137: 1AKW5 WRENCH,BOX AND OPEN END,COMBINATION Combination Wrench,7/16In.,7In. OAL, 9, EA; LI 138: 1AKW6 WRENCH,BOX AND OPEN END,COMBINATION Combination Wrench,1/2In.,8In. OAL, 9, EA; LI 139: 1AKW8 WRENCH,BOX AND OPEN END,COMBINATION Combination Wrench,5/8In.,9-1/2In. OAL, 9, EA; LI 140: 1AKW9 WRENCH,BOX AND OPEN END,COMBINATION Combination Wrench,11/16In,10-1/4In OAL, 4, EA; LI 141: 1AKX0 WRENCH,BOX AND OPEN END,COMBINATION Combination Wrench,3/4In.,11In. OAL, 6, EA; LI 142: 1AKX1 WRENCH,BOX AND OPEN END,COMBINATION Combination Wrench,13/16In,11-3/8In OAL, 6, EA; LI 143: 1AKX2 WRENCH,BOX AND OPEN END,COMBINATION Combination Wrench,7/8In.,12-1/2In. OAL, 7, EA; LI 144: 1AKX4 WRENCH,BOX AND OPEN END,COMBINATION Combination Wrench,1In.,14In. OAL, 3, EA; LI 145: 1AKX5 WRENCH,BOX AND OPEN END,COMBINATION Combination Wrench,1-1/16In,15-1/4In OAL, 7, EA; LI 146: 1AKX8 WRENCH,BOX AND OPEN END,COMBINATION Combination Wrench,1-5/16In.,17In. OAL, 8, EA; LI 147: 1ALC0 WRENCH,BOX AND OPEN END,COMBINATION Combination Wrench,1-7/16In,18-1/2In OAL, 1, EA; LI 148: 15J639 TAP,THREAD CUTTING Hand Tap,#8-32UNC,Bright, 2, EA; LI 149: 1AK06 SOCKET,SOCKET WRENCH Socket,3/8 In Dr,5/16 In,12 Pt,Std, 7, EA; LI 150: 6C962 RASP, HAND Half Round File,14 In,Second,Pipeliner, 2, EA; LI 151: 10Z722 RASP, HAND Cabinet Rasp File,Second,Half Rnd,10 In, 3, EA; LI 152: 3R139 CHISEL,COLD,HAND Cold Chisel,1/4 In. x 4-7/8 In., 28, EA; LI 153: 4HAN9 DRILL, TWIST Taper Shank Drill,17/64,#1MT,Black Oxide, 5, EA; LI 154: 1G596 FILE, HAND Three Square File,6 In,Smooth,American, 6, EA; LI 155: 1G590 FILE, HAND Three Square File,8 In,Smooth,American, 2, EA; LI 156: 1AKA6 FILE, HAND Hand File,10 In,0.375 In Dia,Second Cut, 2, EA; LI 157: 1AKA9 FILE, HAND Hand File,12 In,0.500 In Dia,Smooth Cut, 1, EA; LI 158: 1G736 FILE, HAND Half Round File,10 In,Second,American, 4, EA; LI 159: 1AK14 SOCKET,SOCKET WRENCH Socket,3/8 In Dr,13/16 In,12 Pt,Std, 4, EA; LI 160: 1AF75 SOCKET,SOCKET WRENCH Socket,1/4 In Dr,7/16 In,12 Pt,Std, 16, EA; LI 161: 1AK36 SOCKET,SOCKET WRENCH Socket,3/8 In Dr,3/4 In,12 Pt,Deep, 3, EA; LI 162: 1AF70 SOCKET,SOCKET WRENCH Socket,1/4 In Dr,1/4 In,12 Pt,Std, 19, EA; LI 163: 3r146 CHISEL, COLD HAND Cold Chisel,7/8 In. x 8 In., 15, EA; LI 164: 2mrd2 HAMMER, HAND Brick Hammer,16 Oz,Wood Handle, 6, EA; LI 165: 4TDF2 SOCKET,SOCKET WRENCH Flex Socket,3/8 In Dr,9/16 In,12 Pt,Std, 2, EA; LI 166: 4TDF4 SOCKET,SOCKET WRENCH Flex Socket,3/8 In Dr,11/16 In,12 Pt,Std, 2, EA; LI 167: 4TDF5 SOCKET,SOCKET WRENCH Flex Socket,3/8 In Dr,3/4 In,12 Pt,Std, 2, EA; LI 168: 10T712 DIE,THREAD CUTTING HSS Rd Adj Thread Die,13/16In,3,48 Pitch, 1, EA; LI 169: 10T714 DIE,THREAD CUTTING HSS Rd Adj Thread Die,13/16In,4,40 Pitch, 1, EA; LI 170: 20X632 DIE,THREAD CUTTING Rd Adjustable Die,Steel,5-40, 1, EA; LI 171: 20X633 DIE,THREAD CUTTING Rd Adjustable Die,Steel,6-32, 1, EA; LI 172: 20X635 DIE,THREAD CUTTING Rd Adjustable Die,Steel,8-32, 1, EA; LI 173: 20X701 DIE,THREAD CUTTING Rd Adjustable Die,HSS,#12-24, 1, EA; LI 174: 20K388 HANDLE,SOCKET WRENCH Speeder Handle,3/8 Dr x 16-3/4 In,Chrome, 8, EA; LI 175: 4a848 SCREWDRIVER,CROSS TIP Screwdriver,Phillips,#2 x 4,Cushion, 5, EA; LI 176: 5ll56 SCREWDRIVER,CROSS TIP Screwdriver,Phillips,#2 x 7, 8, EA; LI 177: 20X670 DIE,RETHREADING Hex Rethreading Bolt Die,Steel,3/8,24, 8, EA; LI 178: 20X672 DIE,RETHREADING Hex Rethreading Bolt Die,Steel,7/16-20, 8, EA; LI 179: 20X674 DIE,RETHREADING Hex Rethreading Bolt Die,Steel,1/2-20, 8, EA; LI 180: 5NAF8 SCRAPER,BEARING Machinists Scraper,4 In,Hollow Ground, 8, EA; LI 181: 13H073 FLE, HAND Square File,American,Bastard,12 In, 4, EA; LI 182: 13H075 FLE, HAND Square File,American,Smooth,12 In, 4, EA; LI 183: 1AF99 SOCKET,SOCKET WRENCH Socket,1/4 In Dr,7/16 In,6 Pt,Std, 3, EA; LI 184: 1Q802 DRIFTPIN Brass Drift Punch, 4, EA; LI 185: 2MPX8 SEAL STRAPPING Strapping Seal,3/4In,Snap-On Grit,PK1000, 2, EA; LI 186: 5ZV47 SEAL STRAPPING Strapping Seal,1-1/4 In.,Push,PK700, 2, EA; LI 187: 5XJT7 FILE, HAND Pillar File,Swiss,6 In,2 Cut, 4, EA; LI 188: 5ZV47 DIE,RETHREADING Strapping Seal,1-1/4 In.,Push,PK700, 8, EA; LI 189: 2WDR2 HAMMER-BRUSH,WELDER'S Chipping Hammer w/Brush,Vertical,4.4 Oz, 2, EA; LI 190: 1u228 EXTRACTOR,SCREW Extractor,Screw,#7, 3, EA; LI 191: 1u226 EXTRACTOR,SCREW Extractor,Screw,#6, 3, EA; LI 192: 1u220 EXTRACTOR,SCREW Extractor,Screw,#3, 4, EA; LI 193: 1u216 EXTRACTOR,SCREW Extractor,Screw,#1, 4, EA; LI 194: 3R100 SCREWDRIVER,OFFSET Offset Screwdriver,Slotted,3/8x6 1/8 In, 16, EA; LI 195: 4RE25 KEY,SOCKET HEAD SCREW Hex Key,L,9/16 In,5-3/4 in. L, 6, EA; LI 196: 4RE21 KEY,SOCKET HEAD SCREW Hex Key,L,5/16 In,3-3/4 in. L,PK5, 12, EA; LI 197: 3R357 WRENCH,ADJUSTABLE Adjustable Wrench,4 in.,Chrome,Plain, 4, EA; LI 198: 6ATY6 WRENCH,ADJUSTABLE Spud Pipe Wrench,Cast Iron,12 in., 34, EA; LI 199: 1ANK1 WRENCH,OPEN END Open End Wrench,3/4 X 7/8,15 Deg,9-1/2L, 2, EA; LI 200: 6DPV6 BAR, CHISEL Pinch Chisel Pry Bar,24 In, 3, EA; LI 201: 6DKE4 BAR, PINCH Pinch Point Bar,14 In, 4, EA; LI 202: 1Q742 ?PUNCH,DRIVE PIN Drive Pin Punch,1/16 x 4 1/8 In, 4, EA; LI 203: 1Q738 ?PUNCH,DRIVE PIN Drive Pin Punch,1/4 x 5 3/4 In, 4, EA; LI 204: 15X785 KNIFE,CRAFTSMAN'S Folding Knife,Hawk Bill,4 In,Brown/Rose, 8, EA; LI 205: 1AH99 ADAPTER,SOCKET WRENCH Socket Adapter,1/2 F x 3/8 In M, 5, EA; LI 206: 1AH97 ADAPTER,SOCKET WRENCH Socket Adapter,3/8 F x 1/2 In M, 8, EA; LI 207: 3R158 PUNCH,ALIGNING Punch,Drift,5/16 In, 2, EA; LI 208: 3R156 PUNCH,ALIGNING Punch,Drift,7/32 In, 2, EA; LI 209: 3R154 PUNCH,ALIGNING Punch,Drift,1/8 In, 1, EA; LI 210: 1AM37 HANDLE,SOCKET WRENCH Handle,T,13 In, 3, EA; LI 211: 4RE56 KEY,SOCKET HEAD SCREW Hex Key,L,7/32 In,4-7/8 in. L,PK10, 3, EA; LI 212: 4RE57 KEY,SOCKET HEAD SCREW Hex Key,L,1/4 In,5-1/4 in. L,PK10, 3, EA; LI 213: 4RE57 KEY,SOCKET HEAD SCREW Hex Key,L,1/4 In,5-1/4 in. L,PK10 1AF98 SOCKET,SOCKET WRENCH Socket,1/4 In Dr,3/8 In,6 Pt,Std, 19, EA; LI 214: 4JA36 NUTDRIVER Nut Driver,Hollow,Magnetic,1/4 In,3 In, 18, EA; LI 215: 1g600 FILE, HAND Three Square File,6 In,Bastard/Double, 4, EA; LI 216: 6a628 FILE, HAND Mill File,8 In,Smooth/Single,American, 6, EA; LI 217: 6a626 FILE, HAND Half Round File,6 In,Bastard,American, 6, EA; LI 218: 2a499 FILE, HAND Half Round File,8 In,Bastard,American, 4, EA; LI 219: 1g738 FILE, HAND Half Round File,8 In,Second,American, 2, EA; LI 220: 1G732 FILE, HAND Half Round File,12 In,Smooth,American, 4, EA; LI 221: 13H035 FILE, HAND Mill File,American,Smooth,Rect,14 In, 4, EA; LI 222: 3R157 PUNCH, ALIGNING Punch,Drift,1/4 In, 2, EA; LI 223: 1AF55 HANDLE,SOCKET WRENCH Driver,Socket,6 3/4 In, 16, EA; LI 224: 1AK15 SOCKET,SOCKET WRENCH Socket,3/8 In Dr,7/8 In,12 Pt,Std, 8, EA; LI 225: 6RCC0 SOCKET,SOCKET WRENCH Socket,1/4 In Dr,9/32 In,12 Pt,Std, 19, EA; LI 226: 1AN15 SOCKET,SOCKET WRENCH Socket,1/2 In Dr,3/4 In,12 Pt,Deep, 3, EA; LI 227: 6RCC1 SOCKET,SOCKET WRENCH Socket,1/4 In Dr,11/32 In,12 Pt,Std, 16, EA; LI 228: 1Q745 PUNCH, DRIVE Drive Pin Punch,3/32 x 4 1/2 In, 1, EA; LI 229: 6GRT4 HAMMER, HAND Blacksmith Hammer,3 Lb,15 In,Hickory, 4, EA; LI 230: 4RE13 KEY,SOCKET HEAD SCREW Hex Key,L,3/32 In,2 in. L,PK10, 28, EA; LI 231: 4RE19 KEY,SOCKET HEAD SCREW, 9, EA; LI 232: 1AH74 EXTENSION,SOCKET WRENCH Socket Extension,3/8 x 3 In,Chrome, 3, EA; LI 233: 1AH77 EXTENSION,SOCKET WRENCH Socket Extension,3/8 x 12 In,Chrome, 6, EA; LI 234: 1AM39 EXTENSION,SOCKET WRENCH Socket Extension,1/2 x 2-1/2 In,Chrome, 2, EA; LI 235: 3ZUN5 COUNTERSINK Countersink,6 Fl,82 Deg,3/8,Cobalt, 1, EA; LI 236: 2ZUW3 RULE,MACHINIST'S Steel Rule,Spring Tempered,18 In,4R Grad, 3, EA; LI 237: 1AM40 EXTENSION,SOCKET WRENCH Socket Extension,1/2 x 5 In,Chrome, 10, EA; LI 238: 1AH90 SCREWDRIVER Socket Bit,3/8 Dr,1/4 In,Slotted, 10, EA; LI 239: 1AN19 SOCKET,SOCKET WRENCH Socket,1/2 In Dr,1 In,12 Pt,Deep, 4, EA; LI 240: 1AN20 SOCKET,SOCKET WRENCH Socket,1/2 In Dr,1-1/16 In,12 Pt,Deep, 4, EA; LI 241: 1AN11 SOCKET,SOCKET WRENCH Socket,1/2 In Dr,1/2 In,12 Pt,Deep, 3, EA; LI 242: 3UW33 BRUSH, PAINT Paint Brush,1in.,8-3/4in., 20, EA; LI 243: 2zve1 GAGE, THICJNESS Thickness Gage,13 Straight Leaves, 1, EA; LI 244: 2AJR1 BRUST, ARTIST Artist Brush,Water Colors,1/8in.,7-1/2in, 4, EA; LI 245: 2AJR2 BRUST, ARTIST Artist Brush,Water Colors,1/4in.,7-1/2in, 4, EA; LI 246: 3G965 TWEEZERS,CRAFTSMAN'S Tweezer,4.25 In L,Sharp,Narrow, 2, EA; LI 247: 20K386 HANDLE,SOCKET WRENCH Speeder Handle,1/2 Dr x 21 In,Chrome, 5, EA; LI 248: 5XJY1 FILE, HAND Flat File,Bastard,American,8 In, 2, EA; LI 249: 6A627 FILE, HAND Half Round File,12 In,Bastard,American, 10, EA; LI 250: 6NRD1 GAGE, FILLET Radius Gage Set,1/32 to 1/4,30 Leaves, 9, EA; LI 251: 4ahp7 TAP,THREAD CUTTING Hand Tap,5/16-18UNC,Uncoated, 2, EA; LI 252: 4aht5 TAP,THREAD CUTTING Hand Tap,3/8-16UNC,Uncoated, 1, EA; LI 253: 1ANP6 RATCHET ATTACHMENT,SOCKET WRENCH Ignition Wrench,7/32 x 1/4 in.,15/60 Deg, 2, EA; LI 254: 1ez16 WRENCH,PIPE Offset Pipe Wrench,Aluminum,24 in. L, 1, EA; LI 255: 5LL66 NUTDRIVER Nut Driver,7/16 In,3 In Shank,Cushion, 10, EA; LI 256: 3R932 NUTDRIVER Nut Driver 9/32 In, 14, EA; LI 257: 1ANF8 WRENCH, OPEN Open End Wrench,3/16x1/4,15 Deg,3-7/8 L, 2, EA; LI 258: 1ANH1 WRENCH, OPEN Open End Wrench,3/8x7/16,15 Deg,5-3/4 L, 19, EA; LI 259: 1AK35 SOCKET,SOCKET WRENCH Socket,3/8 In Dr,11/16 In,12 Pt,Deep, 3, EA; LI 260: 2R536 BLADE,HAND HACKSAW Hs Hacksaw Blade Pk10, 32, EA; LI 261: 5R850 BLADE,HAND HACKSAW Hacksaw Blade,10 In,24 TPI,Bi-metal, 14, EA; LI 262: 24C980 BLADE,HAND HACKSAW Hack Saw Blade,Bi-Metal,10x1/2 In,32 TPI, 25, EA; LI 263: 5R854 BLADE,HAND HACKSAW Hacksaw Blade,12 In,32 TPI,Bi-metal, 43, EA; LI 264: 1ANH8 WRENCH, OPEN Open End Wrench,5/8x11/16,15 Deg,8-1/4 L, 3, EA; LI 265: 18DU58 CASE,TWIST DRILL Drill Bit Case,Jobber Length,Steel, 14, EA; LI 266: 3R219 PLIERS, SLIP Angle Nose Plier,5 1/4 In, 12, EA; LI 267: 3R236 PLIERS, SLIP Plier,Tongue/Groove, 11, EA; LI 268: 6C231 BEVEL,SLIDING T Sliding T Bevel, 2, EA; LI 269: 6CMD2 SCREWDRIVER,FLAT TIP Slotted Screwdriver,7/32 x 12 In, 2, EA; LI 270: 3EJU2 SCREWDRIVER,FLAT TIP Slotted Screwdriver,SS,9/64 In Tip, 18, EA; LI 271: 6C260 SCREWDRIVER,FLAT TIP Screwdriver,Slotted,3/8x12 In, 25, EA; LI 272: 3XG68 STRAPPING Steel Strapping,17 mil,2910 ft. L, 2, EA; LI 273: 36A163 WRENCH, BOX Double Box End Wrench,12 Pt,7/16 x1/2 In, 2, EA; LI 274: 1APC4 WRENCH, SPAN Adjustable Hook Spanner Wrench,11/32x1/8, 4, EA; LI 275: 23Z407 EXTRACTOR,LAMP Lamp Extractor,Plastic,1/2 x 4 In, 16, EA; LI 276: 6C270 SCREWDRIVER,FLAT TIP Screwdriver,Slotted,1/4x1 1/2 In,Plastic, 4, EA; LI 277: 1AK05 SOCKET,SOCKET WRENCH Socket,3/8 In Dr,1/4 In,12 Pt,Std, 3, EA; LI 278: 1ED82 PUNCH AND DIE,KNOCKOUT Punch,Knockout,1/2in, 2, EA; LI 279: 1AMN3 WRENCH, BOX Box End Wrench,5/8 x 3/4 in.,6-1/8 in. L, 1, EA; LI 280: 3R095 SCREWDRIVER,OFFSET Offset Screwdriver,Phillips #1,#2, 27, EA; LI 281: 1UDU3 WRENCH,BOX AND OPEN END,COMBINATION Combination Wrench,1/4In.,3-17/64In. OAL, 6, EA; LI 282: 3w639 DIE SET,METAL STAMPING,HAND Number Set,1/4 In. H,Steel, 3, EA; LI 283: 3w639 DIE SET,METAL STAMPING,HAND Number Set,1/4 In. H,Steel, 3, EA; LI 284: 3w639 DIE SET,METAL STAMPING,HAND Number Set,1/4 In. H,Steel, 2, EA; LI 285: 5C629 PLIERS,RETAINING RING Retaining Ring Plier,0.115 In,External, 1, EA; LI 286: 5ZL59 JACK, HYDRAULIC Pump/Standard Cylinder Set,10 Ton Cap, 2, EA; LI 287: 4RE48 KEY,SOCKET HEAD SCREW Hex Key,L,5/64 In,3-13/64 in. L,PK10, 5, EA; LI 288: 1AP52 SOCKET,SOCKET WRENCH Socket,3/4 In Dr,1-1/2 In,12 Pt,Std, 2, EA; LI 289: 4A736 PUNCH AND DIE,KNOCKOUT Punch,Knockout,Round,7/8 In, 2, EA; LI 290: 1AH93 SCREWDRIVER ATTACHMENT,SOCKET WRENCH Socket Bit,3/8 Dr,#2,#2 Phillips, 14, EA; LI 291: 3R155 PUNCH,ALIGNING Punch,Drift,3/16 In, 6, EA; LI 292: 4ahp8 TAP,THREAD CUTTING Hand Tap,5/16-18UNC,Uncoated, 2, EA; LI 293: 1cll3 NUTDRIVER Nut Driver,Hex 11/32 In,Green,Steel, 8, EA; LI 294: 1Q743 PUNCH,STARTER Drive Pin Punch,3/16 x 5 1/4 In, 2, EA; LI 295: 4RE47 KEY,SOCKET HEAD SCREW Hex Key,L,1/16 In,3 in. L,PK10, 5, EA; LI 296: 6R303 BAR, WRECKING Ripping Bar 5/8 X 17 In, 4, EA; LI 297: 6d054 FACE,HAMMER,INSERTED Hammer Tip,1 In Dia,Tough,Green, 13, EA; LI 298: 6d053 FACE,HAMMER,INSERTED Hammer Tip,1 In Dia,Medium,Red, 20, EA; LI 299: 6C261 SCREWDRIVER,FLAT TIP Screwdriver,Slotted,1/4x6 In, 4, EA; LI 300: 6C256 SCREWDRIVER,FLAT TIP Screwdriver,Slotted,1/4x4 In,Plastic, 4, EA; LI 301: 5c553 ?MALLET,RAWHIDE Rawhide Mallet,Hardwood,6 Oz, 1, EA; LI 302: 3R101 PUNCH, CENTER Center Punch,4-3/4 L x 1/4 In Hex, 1, EA; LI 303: 2R480 PUNCH, CENTER Center Punch 1/4 In, 4, EA; LI 304: 3R102 PUNCH, CENTER Center Punch,4 5/8 L x 5/16 In Hex, 2, EA; LI 305: 3R950 NUTDRIVER Nut Driver 9/16 In, 2, EA; LI 306: 2DGN8 KEY SET,SOCKET HEAD SCREW Hex Key Set,0.050 - 5/32 In.,Fold-Up, 1, EA; LI 307: 2ZUC3 BALL ATTACHMENT,MIC Micrometer Ball Attachment,0.250 In Dia, 1, EA; LI 308: 4EAC1 CLAMP, PLIER Locking Plier,Straight,7 In, 1, EA; LI 309: 3MD30 FILE, THREAD Thread Restoring File,X-Fine/X-Course, 9, EA; LI 310: 2R639 GAGE, THICKNESS Go-No-Go Feeler Gauge,22 Blades, 10, EA; LI 311: 3ZG91 (quoted) PUNCH,CUTTING,DOUBLE BOW, 8, EA; LI 312: 1AM21 HANDLE,SOCKET WRENCH Quick Release Ratchet,1/2 In Dr,16 In L, 2, EA; LI 313: 6C243 SCREWDRIVER,CROSS TIP Screwdriver,Phillips,#2 x 10,Plastic, 7, EA; LI 314: 4a856 STRIPPER,WIRE,HAND Wire Stripper/Cutter,6 In,22-30AWG, 1, EA; LI 315: 5ME50 PULLER,NAIL,HAND Nail Puller,12 In L, 1, EA; LI 316: 1V717 DRILL SET,TWIST Jobber Drill Set,20 PC,Wire,HSS,118 Deg, 10, EA; LI 317: 1AP34 SCREWDRIVER ATTACHMENT,SOCKET WRENCH Socket Extension,3/4 x 4 In,Chrome, 1, EA; LI 318: 3WCR1 TWEEZERS,CRAFTSMAN'S Industrial Tweezers,Sharp Point,4 1/2 In, 2, EA; LI 319: 1u218 EXTRACTOR,SCREW Extractor,Screw,#2, 4, EA; LI 320: 4ahm3 TAP,THREAD CUTTING Hand Tap,#6-32UNC,Uncoated, 2, EA; LI 321: 4ahw2 TAP,THREAD CUTTING Hand Tap,7/16-14UNC,Uncoated, 2, EA; LI 322: 4ahw4 TAP,THREAD CUTTING Hand Tap,7/16-14UNC,Uncoated, 1, EA; LI 323: 4a099 HAMMER,HAND Hammer,Hickory Handle, 1, EA; LI 324: 4ahn1 TAP,THREAD CUTTING Hand Tap,#10-24UNC,Uncoated, 2, EA; LI 325: 13H905 KNIFE, CRAFTSMAN Precision Knife Set,Blk/Ylw,22 Pc, 10, EA; LI 326: 1yug2 SCREWDRIVER,CROSS TIP Insulated Phillips Screwdriver,#1, 2, EA; LI 327: 4cz91 SCREWDRIVER,CROSS TIP Screwdriver,Phillips,Nonsparking#3x6, 2, EA; LI 328: 5HM40 SCREWDRIVER,CROSS TIP Screwdriver,#2 Phillips x 1 1/2 In, 5, EA; LI 329: 1AL71 SCREWDRIVER ATTACHMENT,SOCKET WRENCH Socket Bit,3/8 Dr,3/8 In,Hex, 1, EA; LI 330: 3R940 NUTDRIVER Nut Driver 3/8 In, 18, EA; LI 331: 1AL67 SCREWDRIVER ATTACHMENT,SOCKET WRENCH Socket Bit,3/8 Dr,7/32 In,Hex, 1, EA; LI 332: 2RDW8 SCREWDRIVER,FLAT TIP Slotted Screwdriver,1/4 In Tip,3 3/4 L, 2, EA; LI 333: 23Z277 CHISEL,FIRMER High Impact Hand Chisel,1/2 x 3-5/8 In, 4, EA; LI 334: 1AL65 SCREWDRIVER ATTACHMENT,SOCKET WRENCH Socket Bit,3/8 Dr,3/16 In,Hex, 1, EA; LI 335: 1AL70 SCREWDRIVER ATTACHMENT,SOCKET WRENCH Socket Bit,3/8 Dr,5/16 In,Hex, 1, EA; LI 336: 4hf61 TAP,THREAD CUTTING Hand Tap,#3-48UNC,Uncoated, 2, EA; LI 337: 4ahl5 TAP,THREAD CUTTING Hand Tap,#4-40UNC,Uncoated, 2, EA; LI 338: 4ahn8 TAP,THREAD CUTTING Hand Tap,1/4-20UNC,Uncoated, 2, EA; LI 339: 4ahm6 TAP,THREAD CUTTING Hand Tap,#8-32UNC,Uncoated, 2, EA; LI 340: 4ahm2 TAP,THREAD CUTTING Hand Tap,#6-32UNC,Uncoated, 2, EA; LI 341: 3R244 PLIERS,SLIP JOINT Plier,Tongue/Groove, 3, EA; LI 342: 2ZPF6 GAGE,THICKNESS Feeler Gauge,32 Blade,0.0015 to 0.035 In, 1, EA; LI 343: 6R155 SQUARE,CARPENTER'S Carpenters Square,Alum,24 x 16 In, 13, EA; LI 344: 6C237 SCREWDRIVER,CROSS TIP Screwdriver,Phillips,#0 x 2 3/4,Plastic, 3, EA; LI 345: 4ahm1 TAP,THREAD CUTTING Hand Tap,#6-32UNC,Uncoated, 2, EA; LI 346: 4gp98 TAP,THREAD CUTTING Hand Tap,#12-24UNC,Uncoated, 2, EA; LI 347: 4ahm5 TAP,THREAD CUTTING Hand Tap,#8-32UNC,Uncoated, 2, EA; LI 348: 6R271 HAMMER, HAND Ball Pein Hammer,Hickory,40 Oz, 2, EA; LI 349: 4R447 HOLDER,INSERTED HAMMER FACE Soft Face Hammer W/O Tip,1.85Lb,2 1/2 In, 2, EA; LI 350: 4R443 HOLDER,INSERTED HAMMER FACE Soft Face Hammer W/O Tip,1.05 Lb,2 In, 2, EA; LI 351: 2cyx8 IGNITER,FRICTION Single Flint Lighter,w/ 5 Flint Renewals, 9, EA; LI 352: 2cyx8 FLINT TIP,FRICTION IGNITER Single Flint Lighter,w/ 5 Flint Renewals, 1, EA; LI 353: 4EAA7 WRENCH,PLIER Locking Plier,Straight,10 In, 1, EA; LI 354: 4RE53 KEY,SOCKET HEAD SCREW Hex Key,L,9/64 In,4 in. L,PK10, 3, EA; LI 355: 4CHV6 WRENCH, PLIER Locking Plier,Straight,10 In, 3, EA; LI 356: 3XA70 ETCHER, ELECTRIC Engraver,Electric, 1, EA; LI 357: 2DGN4 WRENCH, RATCHET Ratcheting Wrench,3/16-3/8 in. sq., 1, EA; LI 358: 40L721 CALIPER, OUTSIDE Outside Spring Caliper,Range 4 In., 6, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, NAVSEA SUPSHIP - Newport News intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing quotes, which descend in price during the specified period of time for the aforementioned reverse auction. NAVSEA SUPSHIP - Newport News is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time quotes.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their quote using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a quote on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at [email protected]. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith quotes, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or [email protected] of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. No partial shipments are permitted unless specifically authorized at the time of award. Sellers must comply with the applicable FAR Clauses listed: 52.204-99, 52.212-3 Offeror Representations and Certifications ? commercial Items, 52.213-4 Full Text, 52.222-3, 52.232-33, 52.232.99, 52.246-16, 252.246-7000, 52.212-4, 52.212-5, 252.232-7003, 52.225-1. For labor only, NOT materials, the following FAR Clauses apply: 52.222-21, 52.222-26, 52.225-12, 52.233-3. For credit card 52.232-36, for purchases over 25,000, 52.204-10. https://www.acquisition.gov/far/
Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822, Email: [email protected];
