CLEVIS, ROD END
This solicitation is being issued under the First Destination Transportation (FDT) program. If this acquisition is for Foreign Military Sales (FMS) or has an APO/FPO ship-to address, FDT will not apply and normal procedures should be followed.
For FDT program transportation requirements, see DLAD clauses 52.247-9059 F.o.b. Origin, Government Arranged Transportation and 52.247-9058, First Destination Transportation (FDT) Program - Shipments Originating Outside the contiguous United States (OCONUS).
Additional information about FDT can be found on the FDT website: (http://www.dla.mil/FDTPI/).
SUPPLIES/SERVICES: 5340-01-112-5051
CLEVIS,ROD END
MARK IAW MIL-STD-130N(1), DATED 16 NOV 2012. CONFIGURATION CONTROL APPLIES
SEE CLAUSE 52.246-9G36 (SECTION I).
1. SAMPLING FOR INSPECTION AND TESTING SHALL BE IAW ANSI/ASQ Z1.4-2008, DATED JAN 1, 2008. ANY ALTERNATE PLAN MUST BE APPROVED BY THE PCO. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS REQUIRED
2. ANY DEFECTIVE ITEM DISCOVERED DURING INSPECTION MAY BE CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY.
ADEQUATE DATA FOR THE EVALUATION OF ALTERNATE OFFERS IS NOT AVAILABLE AT THE PROCUREMENT AGENCY.THE OFFEROR MUST PROVIDE A COMPLETE DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND ALTERNATE PART FOR EVALUATION.
ROLLS-ROYCE MILITARY AERO ENGINES K0378 P/N B499384
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT
0001 5340-01-112-5051 160.000 EA $ $ CLEVIS,ROD END
PRICING TERMS: Firm Fixed Price QTY VARIANCE: PLUS 0% MINUS 0% INSPECTION POINT: DESTINATION ACCEPTANCE POINT: DESTINATION
FOB: ORIGIN DELIVERY DATE: 270 DAYS ADO PREP FOR DELIVERY:
PKGING DATA-QUP:001
SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS MATERIALS PACKAGING REQUIREMENTS.
SUPPLY/SERVICE: 5340-01-112-5051 CONT'D
PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E., TITLE 49 CODE OF FEDERAL REGULATIONS, INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO) TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4 OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS ON TRANSPORT OF DANGEROUS GOODS. WHEN A); CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES SHIPMENT THROUGH A MILITARY AERIAL PORT FOR TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS MATERIALS FOR MILITARY AIR SHIPMENT.
LABELING AND MARKING: ALL INTERIOR AND EXTERIOR CONTAINERS SHALL BE LABELED AND MARKED AS SPECIFIED IN THE REFERENCED PRODUCT SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D OF THE CONTRACT OR ORDER. IN ADDITION, ALL LABELING AND MARKING SHALL COMPLY WITH THE REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR, AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS, IMDG ANNEX 1, AND/OR DLAI 4145.3.
CERTIFICATION: ALL PACKAGING PERFORMANCE TEST REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES AND REPORTS ATTESTING TO DATE OF TESTING AND DATA RESULTS OBTAINED FROM TESTING. THE CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE, ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS, SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL INSPECTION AND RECEIVING REPORT), OR ANY SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR INSPECTION BY AUTHORIZED U. S. GOVERNMENT REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3 YEARS FROM THE DATE OF SHIPMENT.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH "ASTM D3951."
Markings Paragraph
When ASTM D3951, Commercial Packaging is specified, the following apply:
•,,All containers shall meet ASTM D4169, Standard Practice for Performance Testing of Shipping Containers and Systems.
•,,All Section D Packaging Clauses take precedence over ASTM D3951.
•,,In addition to requirements in MIL-STD-129P, all Labeling and Marking
shall have a Method of Preservation of Commercial Pack applied to the MIL-STD-129 identification labels on
all shipping containers, including the unit and intermediate levels. The Method of Preservation (M) of Commercial Pack (CP) shall be applied to all labels and marking as "MCP."
•,,For all shipments of packaged materiel to the Government, which includes either Depot (DLA-Direct) or DVD (Customer-Direct) shipments, both DoD linear and two-dimensional (2D) bar code markings are required in accordance with MIL-STD-129. See DLAD 52.211-9010 for exceptions to the Military Shipment Label (MSL) requirement. When the MSL is required, the Transportation Control Number (TCN) is not an exception and must always be present. TCN construction is detailed in DTR
4500.9-R (Appendix L).
•,,The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified in the contract take precedence over ASTM D3951.
•,,Loose-fill cushioning and dunnage materials are prohibited in all shipments to DOD customers.
•,,Unitization in accordance with MIL-STD-147, Palletized Unit Loads, is required for all shipments to the DOD activities.
PARCEL POST ADDRESS: SW3113
DLA DISTRIBUTION CHERRY POINT PHANTOM RD BLDG 147 BAY A CHERRY POINT NC 28533-5040 US
SUPPLIERS SHOULD ACCESS DPMS AT HTTPS://VSM.DISTRIBUTION.DLA.MIL, OR CALL 1-800-456-5507 FOR TRANSPORTATION AND SHIPPING ASSISTANCE.
FREIGHT SHIPPING ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT PHANTOM RD BLDG 147 BAY A CHERRY POINT NC 28533-5040 US
********************************************************
QUOTES MAY BE EMAILED TO: [email protected]
********************************************************
Oscar Ramsey, Contracting Officer, Phone 2157378194, Email [email protected]
