Boilers
AJAX Boiler, Model No. SRN-40, 40 HP Water Tube Steam Boiler, 150 psi. Includes the following: Boiler Blow down valves-One Quick Opening and one Slow Opening, Surface Blow down Valve (Needle Valve), Boiler Feedwater Check Valve. See below equipment schedule minimum specifications:
150 psi design
1,750,000 BTU input
1,400,000 BTU output
40 HP boiler rated horsepower with 212 degree F entering feed water temperature
4300 lbs shipping weight dry
Includes the following:
Enhanced control panel
CDS-1 controls
Boiler blowdown valves, one quick opening and one slow opening
Surface blowdown valve (needle valve)
Boiler feed water check valve
Fully modulation natural draft burner
Galvanized jacket
Insulated head plates
Davited front and rear doors
National board registration
Drain connection rear of boiler
Galvanized air wall
Steel tubes
115/1/60 control voltage
Gas pressure 7 min w.c. 14 max w.c.
x 1 150 psi relief valve
Stack thermometer
Gas pressure gauge
Probe type low water cut off and pump control
Auxiliary probe type low water cut off
ASME hydrostatically tested piping on blowdown valves
FABTEK AERO BOILER Feedwater System Model No. TKV2330SSBFDD, 54 gallon tank.
SHIPCO Blowdown Separator, Model No. 450 16 x 28 Separator Size, 49 Gallon Tank, Includes 1.5 Automatic After Cooling Water Temperature Control Valve. See below equipment schedule and specifications.
SHIPCO model BDS blowdown separator
#450 DS
1.5 inlet, 5 vent, 5 drain
150 psi design (ASME code)
16 diameter x 28 long
1.5 automatic after cooling water
Temperature valve
Delivery: Boiler-6 to 8weeks; Boiler Feed-4 weeks; BDS-3 4 weeks
Delivery shall be on or after July 1, 2010 and before September 30, 2010 ARRA Funds.
Delivery date may be a factor in the award of the bid.
