B4 Maintenance Platform
The Product Director, Aviation Ground Support Equipment (PD AGSE) has a Foreign Military Sales (FMS) requirement for 2 each, B4 Maintenance Platforms for the country of Afghanistan under Letter of Agreement (LOA), W5-B-UAQ. The B4 stand is a hydraulically operated, adjustable platform and ladder assembly mounted on a caster-equipped base which can be moved to enable personnel to work safely at heights of approximately 3 to 7 feet. The B4 is mobile and the swivel casters that can be locked for stability when the stand is in the desired location. A tow bar is provided to permit towing by vehicle when movement over long distances is required. The platform is designed to support up to 500 pounds in its raised position. The platform is raised and lowered by manual control of a hydraulic pump.
QUANTITY
PRODUCT
NSN
P/N
2
B4 Maintenance Platform
1730-00-294-8883
54J6345
Inspection: Origin
Acceptance: Origin
Freight On Board (FOB) Point: Destination
2. Specifications:
Base Length: 92.2 inches
Base Width: 52.3 inches
Platform Length: 77.6 inches
Platform Width: 36.0 inches
Minimum Height (lowered): 3.0 feet
Maximum Height (raised): 7.0 feet
Maximum Rated Load Capacity: 500 pounds
Weight: (approximately) 550.0 pounds
Servicing Fluid: Hydraulic Fluid, Fire Resistant
Maximum Towing Speed: 5 MPH
Preservation and Packing Requirements.
Level of Preservation - Military, Packing A is protection required to meet the most severe worldwide shipment, handling, and storing conditions. A Level A pack, must in tandem with the applied method of preservation, be capable of protecting material from the effects of direct exposure to extremes of climate, terrain, and operational and transportation environments. Examples of containers used for Level A packing requirements include, but are not limited to, overseas type wood boxes, and plastic and metal reusable containers.
Level of Preservation: Military
Level of Packing: A
Mark for Shipment as specified In Accordance With (IAW) MIL-STD-129.
Packaging: MIL-STD-2073
Quantity Per Unit Pack: 1
Intermediate Container Quantity: 00
Method of Preservation: 20
Cleaning and Drying Procedure: 1
Preservation Material: 89
Wrapping Material: GB
Cushioning and Dunnage: LK
Cushioning Thickness: Z
Unit Container: FF
Intermediate Container: 00
Unit Container Level: A
Special Marking: 00
Level A Packing: F
Optional Procedure Indicator: A
Maximum Unit Pack Weight: 1.108 LB
Maximum Unit Pack Cube: 82.886 CF
Unit Pack Length: 79.0 IN
Unit Pack Weidth: 37.0 IN
Unit Pack Depth: 49.0 In
Shipping: The Vendor shall ensure the unit cost includes the shipping costs for Transportation to the following address:
Science and Engineering Services
DODAAC: W5J9DS
Attn: AFG UH-60 Program Manager
248 Dunlap Blvd.
Huntsville, AL 35824-1102
The vendor shall label each maintenance platform shipping container in accordance with MIL-STD-129. The "mark for" address below should be affixed to each shipping container.
Afghanistan UH-60 Program
FMS Case: W5-B-UAQ
Attn: Mr. Bill Klopfenstein
PM Brett Driggers, Afghanistan Lead
The required delivery is 90 days after contract award. Early delivery is acceptable and desired, if at no additional cost.
You may email your request to Dominique Voltz at Dominique.voltz.civ@mail.mil or Mitchel Oko, Contracting Officer @ mitchell.a.oko.civ@mail.mil. Phone calls will NOT be accepted
Dominique Voltz, Contract Specialist, Phone 2568761150, Email dominique.voltz.civ@mail.mil - mitchell oko, contracting officer, Phone 2568423797, Email mitchell.a.oko.civ@mail.mil
