New business relationships start here
Aluminum Motorcycle Blanks
Download the rfp file: RFQ%2048.pdf.
ALUMINUM SHALL BE 3105-H12. ALUMINUM WILL BE PROVIDED BY SUPPLIER. ALUMINUM BLANKS SHALL HAVE 3/4" RADIUS CORNERS,
FOUR (4) 1/4" DIAMETER HOLES AT 5 5/8" OFF CENTER AND 2 3/4" OFF CENTER.
LICENSE PLATE SHEETING: PROVIDED BY VERMONT CORRECTIONAL INDUSTRIES AND SHIPPED TO THE SUPPLIER PLAIN WHITE
REFLECTIVE SHEETING (NO ENSURE MARK). THE SHEETING IS PRESSURE SENSITIVE AND MUST BE PRESSURE APPLIED. THE
SHEETING WILL BE SUPPLIED AS A ROLL MEASURING 6 15/16" WIDE. APPLIED SHEETING WILL BE CENTERED, 1/32" INSIDE EDGE
OF ALUMINUM BLANK.
THE FINISHED PLATE BLANK SIZE IS 7" X 4".
QUOTE WILL INCLUDE ALUMINUM BLANK AS SPECIFIED, LABOR TO APPLY SHEETING AND DELIVERY. NO EMBOSSING OR DEBOSSING
