ATON Reflective Letters
(i) This is a combined synopsis/solicitation for commercial items, prepared in accordance with the format in subpart 12.6 of the FAR and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued.
(ii) Solicitation number HSCG40-14-Q-61449 applies, and is issued as a Request for Quote (RFQ).
This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-75, effective, 25 June 2014.
(iii) It is anticipated that a competitive price purchase order shall be awarded as a result of this synopsis/solicitation. The North American Industry Classification System (NAICS) code is 339950 / 326113 for this requirement. All responsible sources may submit a quotation, which if timely received, shall be considered by this agency.
(iv) The U.S. Coast Guard, Surface Forces Logistics Center (SFLC) intends to award a Firm Fixed Price Purchase Order. Award will be made on an all or none basis and lowest technically acceptable price.
(v) The United States Coast Guard Surface Forces Logistics Center has a requirement for the following items:
Line Item #1 41/PG
7690-01-435-5014
ITEM NAME: LETTER B, GREEN, REFLECTIVE, 16 INCHES IN HEIGHT, - U/I: PG
PG/2 TWO EACH PER PACKAGE.
TO BE MADE IAW SPECIFICATION P-630-0301.
FIRST ARTICLE TEST REQUIRED IAW P-630-0301 PARA 4.2
CONFORMANCE INSPECTION REQUIRED IAW P-630-0301 PARA 4.3.
EACH UNIT TO BE INDIVIDUALLY PACKAGED IAW ATSM 3951 AND P-630-0301 PARA 5.1.
EACH UNIT TO BE INDIVIDUALLY MARKED IAW MIL-STD-129P AND P-630-0301 PARA 5.2.
BAR CODING IS REQUIRED IAW AIM BC1.
Line Item #2 10/PG
7690-01-435-6050
ITEM NAME: LETTER B, SILVER/WHITE, REFLECTIVE, 8 INCHES IN HEIGHT, U/I: PG PG/10. TEN EACH PER PACKAGE
TO BE MADE IAW SPECIFICATION P-630-0301.
FIRST ARTICLE TEST REQUIRED IAW P-630-0301 PARA 4.2.
CONFORMANCE INSPECTION REQUIRED IAW P-630-0301 PARA 4.3.
EACH UNIT TO BE INDIVIDUALLY PACKAGED IAW ASTM 3951 AND P-630-0301 PARA 5.1.
EACH UNIT TO BE INDIVIDUALLY MARKED IAW MIL-STD-129P AND P-630-0301 PARA 5.2.
BAR CODING IS REQUIRED IAW AIM BC1.
Line Item #3 20/PG
7690-01-436-3282
ITEM NAME: NUMBER 0, GREEN, REFLECTIVE, 12 INCHES IN HEIGHT U/I: PG
PG/10. 10 EACH PER PACKAGE
TO BE MADE IAW SPECIFICATION P-630-0301.
FIRST ARTICLE TEST REQUIRED IAW P-630-0301 PARA 4.2.
CONFORMANCE INSPECTION REQUIRED IAW P-630-0301 PARA 4.3.
EACH UNIT TO BE INDIVIDUALLY PACKAGED IAW ASTM D 3951 AND P-630-0301 PARA 5.1.
EACH UNIT TO BE MARKED IAW MIL-STD-129P AND P-630-0301 PARA 5.2.
BAR CODING IS REQUIRED IAW AIM BC1.
Line Item #4 10/PG
7690-01-436-3526
ITEM NAME: NUMBER 0, RED, REFLECTIVE, 8 INCHES IN HEIGHT, U/I PG
PG/10. 10 EACH PER PACKAGE
TO BE MADE IAW SPECIFICATION P-630-0301.
FIRST ARTICLE TEST REQUIRED IAW P-630-0301 PARA 4.2.
CONFORMANCE INSPECTION REQUIRED IAW P-630-0301 PARA 4.3.
EACH UNIT TO BE INDIVIDUALLY PACKAGED IAW ASTM D 3951AND P-630-0301 PARA 5.1.
EACH UNIT TO BE INDIVIDUALLY MARKED IAW MIL-STD-129P AND P-630-0301 PARA 5.2.
BAR CODING IS REQUIRED IAW AIM BC1.
Line Item #5 125/PG
7690-01-436-4523
ITEM NAME: NUMBER 0, SILVER/WHITE, REFLECTIVE, 10 INCHES IN HEIGHT, U/I PG
PG/10. 10 EACH PER PACKAGE
TO BE MADE IAW SPECIFICATION P-630-0301.
FIRST ARTICLE TEST REQUIRED IAW P-630-0301 PARA 4.2.
CONFORMANCE INSPECTION REQUIRED IAW P-630-0301 PARA 4.3.
EACH UNIT TO BE INDIVIDUALLY PACKAGED IAW ASTM D3951 AND P-630-0301 PARA 5.1.
EACH UNIT TO BE INDIVIDUALLY MARKED IAW MIL-STD-129P AND P-630-0301 PARA 5.2.
BAR CODING IS REQUIRED IAW AIM BC1.
Line Item #6 35/PG
7690-01-436-4625
ITEM NAME: NUMBER "0", SILVER/WHITE, REFLECTIVE, 12 INCHES IN HEIGHT, U/I PG
PG/10. 10 EACH PER PACKAGE
TO BE MADE IAW SPECIFICATION P-630-0301.
FIRST ARTICLE TEST REQUIRED IAW P-603-0301 PARA 4.2.
CONFORMANCE INSPECTION REQUIRED IAW P-603-0301 PARA 4.3.
EACH UNIT TO BE INDIVIDUALLY PACKAGED IAW ASTM D 3951 AND P-630-0301 PARA 5.1.
EACH UNIT TO BE INDIVIDUALLY MARKED IAW MIL-STD-129P AND P-630-0301 PARA 5.2.
BAR CODING IS REQUIRED IAW AIM BC1
Line Item #7 40/PG COST
7690-01-436-7820
ITEM NAME: NUMBER 1, SILVER/WHITE, REFLECTIVE, 10 I INCHES IN HEIGHT, U/I PG
PG/10. 10 EACH PER PACKAGE
TO BE MADE IAW SPECIFICATION P-630-0301.
FIRST ARTICLE TEST REQUIRED IAW P-630-0301 PARA 4.2.
CONFORMANCE INSPECTION REQUIRED IAW P-630-0301 PARA 4.3.
EACH UNIT TO BE INDIVIDUALLY PACKAGED IAW ASTM D 3951 AND P-630-0301 PARA 5.1.
EACH UNIT TO BE INDIVIDUALLY MARKED IAW MIL-STD-129P AND P-630-0301 PARA 5.2.
BAR CODING IS REQUIRED IAW AIM BC1.
Line Item #8 30/PG
7690-01-437-6049
ITEM NAME: NUMBER 2, SILVER/WHITE, REFLECTIVE, 10 INCHES IN HEIGHT, U/I PG
PG/10. 10 EACH PER PACKAGE
TO BE MADE IAW P-630-0301.
FIRST ARTICLE TEST REQUIRED IAW P-630-0301 PARA 4.2.
CONFORMANCE INSPECTION REQUIRED IAW P-630-0301 PARA 4.3.
EACH UNIT TO BE INDIVIDUALLY PACKAGED IAW ASTM D 3951 AND P-630-0301 PARA 5.1.
EACH UNIT TO BE INDIVIDUALLY MARKED IAW MIL-STD-129P AND P-630-0301 PARA 5.2.
BAR CODING IS REQUIRED IAW AIM BC1.
Line Item #9 40/PG
7690-01-437-6051
ITEM NAME: NUMBER 2, SILVER/WHITE, REFLECTIVE, 12 INCHES IN HEIGHT, U/I PG
PG/10. 10 EACH PER PACKAGE
TO BE MADE IAW SPECIFICATION P-630-0301.
FIRST ARTICLE TEST REQUIRED IAW P-630-0301 PARA 4.2.
CONFORMANCE INSPECTION REQUIRED IAW P-630-0301 PARA 4.3.
EACH UNIT TO BE INDIVIDUALLY PACKAGED IAW ASTM D 3951 AND P-630-0301 PARA 5.1.
EACH UNIT TO BE INDIVIDUALLY MARKED IAW MIL-STD-129P AND P-630-0301 PARA 5.2.
BAR CODING IS REQUIRED IAW AIM BC1.
Line Item #10 20/PG
7690-01-438-0645
ITEM NAME: NUMBER 3, SILVER/WHITE, REFLECTIVE, 12 INCHES IN HEIGHT, U/I PG
PG/10. 10 EACH PER PACKAGE
TO BE MADE IAW SPECIFICATION P-630-0301.
FIRST ARTICLE TEST REQUIRED IAW P-630-0301 PARA 4.2.
CONFORMANCE INSPECTION REQUIRED IAW P-630-0301 PARA 4.3.
EACH UNIT TO BE INDIVIDUALLY PACKAGED IAW ASTM D 3951 AND PARA 5.1.
EACH UNIT TO BE INDIVIDUALLY MARKED IAW MIL-STD-129P AND P-630-0301 PARA 5.2.
BAR CODING IS REQUIRED IAW AIM BC1.
Line Item #11 40/PG
7690-01-438-9304
ITEM NAME: NUMBER 4, SILVER/WHITE, REFLECTIVE, 12 INCHES IN HEIGHT, U/I PG
PG /10. 10 EACH PER PACKAGE
TO BE MADE IAW SPECIFICATION P-630-0301.
FIRST ARTICLE TEST REQUIRED IAW P-630-0301 PARA 4.2.
CONFORMANCE INSPECTION REQUIRED IAW P-630-0301 PARA 4.3.
EACH UNIT TO BE INDIVIDUALLY PACKAGED IAW ASTM D 3951 AND P-630-0301 PARA 5.1.
EACH UNIT TO BE INDIVIDUALLY MARKED IAW MIL-STD-129P AND P-630-0301 PARA 5.2. BAR CODING IS REQUIRED IAW AIM BC1.
Line Item 12 30/PG
7690-01-439-0298
ITEM NAME: NUMBER 5, SILVER/WHITE, REFLECTIVE, 10 INCHES IN HEIGHT, U/I PG
PG/10. 10 EACH PER PACKAGE
TO BE MADE IAW SPECIFICATION P-630-0301.
FIRST ARTICLE TEST REQUIRED IAW P-630-0301 PARA 4.2.
CONFORMANCE INSPECTION REQUIRED IAW P-630-0301 PARA 4.3.
EACH UNIT TO BE INDIVIDUALLY PACKAGED IAW ASTM D 3951 AND P-630-0301 PARA 5.1.
EACH UNIT TO BE INDIVIDUALLY MARKED IAW MIL-STD-129P AND P-630-0301 PARA 5.2.
BAR CODING IS REQUIRED IAW AIM BC1
Line Item # 13 30/PG
7690-01-439-0900
ITEM NAME: NUMBER 6, SILVER/WHITE, REFLECTIVE, 10 INCHES IN HEIGHT, U/I PG
PG/10. 10 EACH PER PACKAGE
TO BE MADE IAW SPECIFICATION P-630-0301.
FIRST ARTICLE TEST REQUIRED IAW P-630-0301 PARA 4.2.
CONFORMANCE INSPECTION REQUIRED IAW P-630-0301 PARA 4.3.
EACH UNIT TO BE INDIVIDUALLY PACKAGED IAW ASTM D 3951AND P-630-0301 PARA 5.1.
EACH UNIT TO BE INDIVIDUALLY MARKED IAW MIL-STD-129P AND P-630-0301 PARA 5.2.
BAR CODING IS REQUIRED IAW AIM BC1.
Line Item # 14 50/PG
7690-01-440-2651
ITEM NAME: NUMBER 7, SILVER/WHITE, REFLECTIVE, 12 INCHES IN HEIGHT, U/I PG
PG/10. 10 EACH PER PACKAGE
TO BE MADE IAW SPECIFICATION P-630-0301.
FIRST ARTICLE TEST REQUIRED IAW P-630-0301 PARA 4.2.
CONFORMANCE INSPECTION REQUIRED IAW P-630-0301 PARA 4.3.
EACH UNIT TO BE INDIVIDUALLY PACKAGED IAW ASTM D 3951 AND P-630-0301 PARA 5.1.
EACH UNIT TO BE INDIVIDUALLY MARKED IAW MIL-STD-129P AND P-630-0301 PARA 5.2.
BAR CODING IS REQUIRED IAW AIM BC1.
Line Item #15 10/PG
7690-01-440-2843
ITEM NAME: NUMBER 8, RED, REFLECTIVE, 8 INCHES IN HEIGHT, U/I PG
PG/10. 10 EACH PER PACKAGE
TO BE MADE IAW SPECIFICATION P-630-0301.
FIRST ARTICLE TEST REQUIRED IAW P-630-0301 PARA 4.2.
CONFORMANCE INSPECTION REQUIRED IAW P-630-0301 PARA 4.3.
EACH UNIT TO BE INDIVIDUALLY PACKAGED IAW ASTM D 3951AND P-630-0301 PARA 5.1.
EACH UNIT TO BE INDIVIDUALLY MARKED IAW MIL-STD-129P AND P-630-0301 PARA 5.2.
BAR CODING IS REQUIRED IAW AIM BC1.
Line Item #16 30/PG
7690-01-440-3012
ITEM NAME: NUMBER 8, SILVER/WHITE, REFLECTIVE, 12 INCHES IN HEIGHT, U/I PG
PG/10. 10 EACH PER PACKAGE
TO BE MADE IAW SPECIFICATION P-630-0301.
FIRST ARTICLE TEST REQUIRED IAW P-630-0301 PARA 4.2.
CONFORMANCE INSPECTION REQUIRED IAW P-630-0301 PARA 4.3.
EACH UNIT TO BE INDIVIDUALLY PACKAGED IAW ASTM D 3951 AND P-630-0301 PARA 5.1.
EACH UNIT TO BE INDIVIDUALLY MARKED IAW MIL-STD-129P AND P-630-0301 PARA 5.2.
BAR CODING IS REQUIRED IAW AIM BC1.
Line Item #17 15/PG
7690-01-436-2782
ITEM NAME: LETTER W, SILVER/WHITE, REFLECTIVE, 8 INCHES IN HEIGHT, U/I PG
PG/10. 10 EACH PER PACKAGE
TO BE MADE IAW SPECIFICATION P-630-0301.
FIRST ARTICLE TEST REQUIRED IAW P-630-0301 PARA 4.2.
CONFORMANCE INSPECTION REQUIRED IAW P-630-0301 PARA 4.3.
EACH UNIT TO BE INDIVIDUALLY PACKAGED IAW ASTM D 3951 AND P-630-0301 PARA 5.1.
EACH UNIT TO BE INDIVIDUALLY MARKED IAW MIL-STD-129P AND P-630-0301 PARA 5.2.
BAR CODING IS REQUIRED IAW AIM BC1.
Line Item #18 10/PG
7690-01-436-6373
ITEM NAME: NUMBER 1, RED, REFLECTIVE, 8 INCHES IN HEIGHT, U/I PG
PG/10. 10 EACH PER PACKAGE
TO BE MADE IAW SPECIFCATION P-630-0301.
FIRST ARTICLE TEST REQUIRED IAW P-630-0301 PARA 4.2.
CONFORMANCE INSPECTION REQUIRED IAW P-630-0301 PARA 4.3.
EACH UNIT TO BE PACKAGED IAW ASTM D 3951 AND P-630-0301 PARA 5.1.
EACH UNIT TO BE INDIVIDUALLY MARKED IAW MIL-STD-129P AND P-630-0301 PARA 5.2.
BAR CODING IS REQUIRED IAW AIM BC1.
Line Item #19 10/PG
7690-01-439-4786
ITEM NAME: NUMBER 7, REFLECTIVE, RED, 8 INCHES IN HEIGHT, U/I PG
PG/10. 10 EACH PER PACKAGE
TO BE MADE IAW SPECIFICATION P-630-0301.
FIRST ARTICLE TEST REQUIRED IAW P-630-0301 PARA 4.2.
CONFORMANCE INSPECTION REQUIRED IAW P-630-0301 PARA 4.3.
EACH UNIT TO BE INDIVIDUALLY PACKAGED IAW ASTM D 3951 AND P-630-0301 PARA 5.1.
EACH UNIT TO BE INDIVIDUALLY MARKED IAW MIL-STD-129P AND P-630-0301 PARA 5.2.
BAR CODING IS REQUIRED IAW AIM BC1.
Delivery of all Items are required by 1 Sep 14
Promised Delivery Date:_________________________________
The first article samples will be inspected for compliance with the associated Coast Guard specifications and requirements listed above. Authority to proceed with the production will not be granted until first article samples have been successfully inspected.
The contractor shall produce both the first article and production quantity at the same facility and shall submit a certificate to this effect with each first article.
The first article sample(s) will not be considered as a partial shipment against items XXX1 through XX19 as applicable.
FINAL INSPECTION AND ACCEPTANCE WILL BE MADE AT DESTINATION BY U.S. COAST GUARD SURFACE FORCES LOGISTICS CENTER QUALITY ASSURANCE PERSONNEL.
(vi) PLACE OF DELIVERY: U.S. Coast Guard, Surface Forces Logistics Center, 2401 Hawkins Point Road, Bldg. 88A - Receiving Room, Baltimore, MD 21226. All deliveries are to be made Monday through Friday between the hours of 7:00 AM and 1:00 PM EST.
QUOTE PRICES: FOB DESTINATION.
PREPARATION FOR DELIVERY: All material shipped to the U.S. Coast Guard Surface Forces Logistics Center, Bldg. 88A, Receiving Room, 2401 Hawkins Point Road, Baltimore, MD 21226 on a purchase order must be accompanied by an itemized packing list securely attached to the outside of the package. All packing lists shall cite the Purchase Order Number with the package in such a manner as to provide identification. Material shall be packed for shipment in such a manner as to afford adequate protection to the item against corrosion, deterioration, and physical damage during shipment from the supply source to destination. All shipments shall have the purchase order number, stock number (if applicable) and vendor name and part number clearly marked on the exterior of the package. All deliveries are to be made Monday through Friday between the hours of 7:00 AM and 1:00 PM.
GOVERNMENT ACCEPTANCE: Acceptance will be made at destination by a Government representative. Acceptance will be contingent upon the representative's verification of no damage in transit, correctness and completeness of order and contractor's conformance to reservation/packaging, packing and marking requirements.
NOTICE FOR FILING AGENCY PROTESTS
United States Coast Guard Ombudsman Program
It is the policy of the United States Coast Guard (USCG) to issue solicitations and make contract awards in a fair and timely manner. The Ombudsman Program for Agency Protests (OPAP) was established to investigate agency protest issues and resolve them without
expensive and time-consuming litigation. OPAP is an independent reviewing authority that is empowered to grant a prevailing protester essentially the same relief as the Government Accountability Office (GAO).
Interested parties are encouraged to seek resolution of their concerns within the USCG as an Alternative Dispute Resolution (ADR) forum rather than filing a protest with the GAO or some external forum. Interested parties may seek resolution of their concerns informally or opt to file a formal agency protest with the Contracting Officer or Ombudsman.
Informal Forum with the Ombudsman. Interested parties who believe a specific USCG procurement is unfair or otherwise defective should first direct their concerns to the applicable Contracting Officer. If the Contracting Officer is unable to satisfy their concerns, interested parties are encouraged to contact the U.S. Coast Guard Ombudsman for Agency Protests. Under this informal process the agency is not required to suspend contract award performance. Use of an informal forum does not suspend any time requirement for filing a protest with the agency or other forum. In order to ensure a timely response, interested parties should provide the following information to the Ombudsman: solicitation/contract number, contracting office, Contracting Officer, and solicitation closing date (if applicable).
Formal Agency Protest with the Ombudsman. Prior to submitting a formal agency protest, protesters must first use their best efforts to resolve their concerns with the Contracting Officer through open and frank discussions. If the protester's concerns are unresolved, an Independent Review is available by the Ombudsman. The protester may file a formal agency protest to either the Contracting Officer or, as an alternative to that, the Ombudsman under the OPAP program. Contract award or performance will be suspended during the protest period unless contract award or performance is justified, in writing, for urgent and compelling reasons or is determined in writing to be in the best interest of the Government. The agency's goal is to resolve protests in less than 35 calendar days from the date of filing. Protests shall include the information set forth in FAR 33.103(d) (2). If the protester fails to submit the required information, resolution of the protest may be delayed or the protest may be dismissed. To be timely protests must be filed within the period specified in FAR 33.103(e). Formal protests filed under the OPAP program should be submitted to:
COMMANDANT (CG-9131)
U S COAST GUARD
OMBUDSMAN PROGRAM FOR AGENCY PROTESTS
2100 2ND ST., SW MAIL STOP 7112
WASHINGTON DC 20593-7112
The Ombudsman Hotline telephone number is 202.372.3695.
(vii) The following FAR clauses apply to this solicitation. To review the following clauses in full text please go to http://farsite.hill.af.mil/vffar.htm.
(viii) FAR 52.212-1 Instructions to Offerors-Commercial Items (Apr 2014). Parties responding to this solicitation may submit their offer in accordance with their standard commercial practices to the office specified in this solicitation at or before the exact time specified in this solicitation. Offers may be submitted on the SF 1449, letterhead stationery, or as otherwise specified in the solicitation. As a minimum, offers must show: (1) The solicitation number (2) The time specified in the solicitation for receipt of offers; (3) The name, address, and telephone number of the offeror; (4) A technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary; (5) Terms of any express warranty; (6) Price. Delivery information and any discount terms; (7) "Remit to" address, if different than mailing address; (8) A completed copy of the representations and certifications at FAR 52.212-3 (see FAR 52.212-3(b) for those representations and certifications that the offeror shall complete electronically); (9) Acknowledgment of Solicitation Amendments; (10) Past performance information, when included as an evaluation factor, to include recent and relevant contracts for the same or similar items and other references (including contract numbers, points of contact with telephone numbers and other relevant information); and (11) If the offer is not submitted on the SF 1449, include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. (12) Dun & Bradstreet number.
(ix) FAR 52.212-2 Evaluation-Commercial Items (Jan 1999). - This is a commercial item acquisition. The evaluation and award procedures in FAR 13.106 apply. The following evaluation factors shall be considered: The Government will award a purchase order resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The Government will evaluate offers based on best value.
(x) FAR 52.212-3 Offeror Representations and Certifications-Commercial Items (May 2014) - An offeror shall complete only paragraphs (b) of this provision if the offeror has completed the annual representations and certificates electronically via http://www.acquisition.gov . If an offeror has not completed the annual representations and certifications electronically at the System for Award Management (SAM) website (www.sam.gov), the offeror shall complete only paragraphs (c) through (o) of this provision.
(xi) FAR 52.212-4 Contract Terms and Conditions-Commercial Items (May 2014) applies to this acquisition. The following addendum applies: Address for submission of invoices is U.S. Coast Guard, P.O. Box 4122, Chesapeake, VA 23327-4122, Phone 757-523-6940 or Email address for submission of invoices is [email protected] .
(xii) 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders -Commercial Items (Jun 2014)
The Contractor shall comply with the FAR clauses which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:
(1) 52.219-28, Post Award Small Business Program Representation (Jul 2013) (15 U.S.C. 632(a) (2)).
(2) 52.222-3, Convict Labor (June 2003) (E.O. 11755).
(3) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Jan 2014) (E.O. 13126).
(4) 52.222-21, Prohibition of Segregated Facilities (Feb 1999).
(5) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246).
(6) 52.222-36, Affirmative Action for Workers with Disabilities (Oct 2010) (29 U.S.C. 793).
(7) 52.223-18, Contractor Policy to Ban Text Messaging while Driving (Aug 2011) (E.O. 13513).
(8) 52.225-1, Buy American Act-Supplies (May 2014) (41 U.S.C. 10a-10d).
(9) 52.225-13, Restrictions on Certain Foreign Purchases (Jun 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).
(10) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management Registration (Jul 2013) (Deviation)
(11) 52.222-41, Service Contract Labor Standards (May 2014) (41 U.S.C. Chapter 67)
(12) 52.222-43, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C. 351, Chapter 67.).
(xiii) Questions and quotes may be emailed to [email protected]
Questions are due NO LATER THAN 23 JUL 14.
Quotes are due by 27 JULY 2014 @ 12:00 PM EST. Contractors are responsible for verifying receipt of quotes.
POC is Ramona Hatfield, Purchasing Agent, 410-762-6101, [email protected].
Ramona E. Hatfield, Phone 4107626101, Email [email protected]
