58 - Sources Sought Announcement for the manufacturing of the AN/PDR-77 Pancake Probe and the RPO kit
FOR ALL INFORMATION CONTACT: POC: Michelet Audige, Maintenance Engineer, 443-395-1424
greater than Manufacturing of Pancake Probe Radiac Detector and the RPO kit
This is not a solicitation. This is only an estimate and will not bind the contractor or the Government in
any way or at any time into a contract with any of the specified terms below.
This is a market survey to locate potential sources for manufacturing of Pancake Probe and Radiation Protection Officer (RPO) Kit with NSNs: (6665-01-435-0548 & 6665-01-435-0551) for a five (5) year IDIQ contract. The Pancake Probe is a Radiac Detector that has unique calibration information stored in non-volatile memory. It also has the capability of identifying, verifying, and determining surface and visual contamination.
The U.S. Army is seeking to identify vendors with the capability to supply an indefinite quantity of Pancake Probes and RPO kit. The vendors must have extensive knowledge of the AN/ PDR-77 Pancake Probe system and the RPO Kit. The vendors should also be able to provide at least four hundred ninety five (495) of each of them over a five (5) year period, at the possibility of ninety nine (99) per year. The Base Year amount the U.S. Army intends to procure is twenty three (23) Pancake Probes. The amount of RPO Kits to be procured is yet to be determined. The U.S. Army will not provide any test equipment or facilities for this effort.
Any interested sources must send the following information, NLT 20 June 2014, to CECOM LCMC PRD Directorate, ATTN: RDER-PRA-CA (Michelet Audige), Bldg 6007, APG, MD 21005 or email to [email protected]:
Identification of the contractor as a Large or Small business. If a small business, please identify as an 8(a), HUB Zone, Disadvantaged, Women-Owned, or non-disadvantaged.
Past performance for these items. The Contractor shall submit their part numbers, NSN, or nomenclature and the date of the last manufacturing effort of the same items for which they have manufacturing experience. Government contract numbers, if applicable, shall be provided.
The contractor shall cite the quality standard (either Government or Industry) that shall be in place for this effort.
The contractor must provide information to show that they possess, or shall possess, adequate experience, knowledge, production plant facilities (equipment, tooling, and space) to enable them, or their subcontractors, to support this item at the contractor's best estimated delivery schedule (to include rate per month and number of months lead time from contract award).
All technical questions should be addressed to Michelet Audige (443) 395-1424, email address [email protected]
EMAIL ADDRESS [email protected]
POC
Savino Sica, 443-861-5441
ACC-APG - Aberdeen Division B
