43 - Ejector, Jet
Please review the NSN/item below and provide us with any sources that are able to manufacture the item. Please also provide the location of the manufacturer (City and state OR Country as applicable). Please also provide POCs for these manufacturers if available. Please submit this information to Brian Maxwell at brian.maxwell@dla.mil
FAX: (614) 693-1628. Telephone: (614) 692-1067.
Thank you in advance for your assistance.
NSN: 4320-01-540-4180, Ejector, Jet.
This item is being procured in accordance with the part numbers listed below:
HAMILTON SUNDSTRAND CORPORATION (73030) P/N 814259-3
Should a company wish to be reviewed and qualified as an "Approved Source", they may submit an application package through the DLA Land and Maritime Alternate Offer / Source Approval Request (SAR) Program. A SAR package contains all technical data needed to demonstrate that the prospective contractor can competently manufacture the product to the same level of quality or better than the Original Equipment Manufacturer (OEM). The onus is on the contractor to document and demonstrate their product is equal to, or better, than the currently approved item which DLA Land and Maritime is procuring.
Offerors should complete and submit their Alternate Offer (with SAR package) to the Contracting
Officer listed in the Solicitation.
For further information, please reference the DLA Land and Maritime web page at:
http://www.dla.mil/LandandMaritime/Business/Selling/AlternateOffers.aspx
Click on the highlight Alternate Offer/Source Approval Program for a detailed explanation for the information and format necessary for a SAR and for the SAR approval process.
Offers not cited as an approved source are required to obtain source approval prior to award. The contractor must submit a Source Approval Request (SAR) PKG to DLA for evaluation. All required information must be provided.
Any available drawings can be accessed along with the solicitation once it is issued.
NOTE: THIS IS A RESTRICTED SOURCE ITEM AND REQUIRES ENGINEERING SOURCE APPROVAL BY THE GOVERNMENT DESIGN CONTROL ACTIVITY.
ALTERNATE OFFEROR REQUIREMENTS:
THE FOLLOWING DOCUMENTATION IS REQUIRED IN ACCORDANCE WITH MIL-T-31000. (A) ALL DRAWINGS AND SPECIFICATIONS REQUIRED FOR MANUFACTURE.
(B) PROCESS/OPERATION SHEETS WHICH DESCRIBE IN DETAIL EACH CRITICAL PROCESS AND ASSOCIATED INSPECTION/ACCEPTANCE CRITERIA. (C) IDENTIFICATION OF SOURCES WHO WILL PERFORM CRITICAL PROCESSES/OPERATIONS, INCLUDING SOURCES OF FORGINGS AND CASTINGS. (D) IF AVAILABLE COPIES OF PURCHASE ORDERS FROM THE ITEM. (E) A SHOCK EXTENSION REPORT IN ACCORDANCE WITH MIL-S-901 AND IN A FORMAT AS SPECIFIED IN DI-ENVR-80706 IS REQUIRED. IF THE OEM'S DETAILED DRAWINGS ARE NOT AVAILABLE, THE OFFEROR MUST SUPPLY AN ENGINEERING ANALYSIS REPORT WHICH DETAILS HOW THEIR DRAWINGS WERE DEVELOPED. ADDITIONALLY, IF REVERSE ENGINEERING WAS USED, THE COMPLETE PROCEDURE WILL BE REPORTED INCLUDING: NUMBER OF SAMPLES, METHODS AND MEASURES USED, ALL DATA COMPILED, RATIONALE FOR DIMENSION TOLERANCE DEVIATION, AND RATIONALE FOR ACCEPTANCE. THIS DATA WILL BE FORWARDED TO THE ENGINEERING SUPPORT ACTIVITY FOR EVALUATION.
Brian S Maxwell, Phone 614-692-1067, Fax 614-692-6925, Email brian.maxwell@dla.mil
