The RFP Database
New business relationships start here

1 NSN SOURCES SOUGHT NOTICE


Ohio, United States
Government : Military
RFP
Go to the link
This document has expired, therefore the above link may no longer work.

 

***Sources Sought***


 


This is not a request for either a quote or proposal. This announcement is considered market research in accordance with FAR Part 10.


 


                                          NO SOLICITATION IS BEING ISSUED AT THIS TIME.  


 


The purpose of this synopsis is to identify qualified vendors capable of manufacturing items in accordance with the requirements listed below.  Please review the below NSNs and provide us with any additional sources that are able to manufacture these items.  Please provide the company name, city and state OR country if applicable, and POCs with telephone, fax and/or email information.  All of this information can be submitted to Scott Knowles at Scott.Knowles@dla.mil. ; Phone 614 692-0639. We thank you in advance for your assistance.


 


NSN:2530-01-502-0543


 


      SENSOR, ANTI-LOCK BRAKE, VEHICULAR.


 


 


RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT


 


RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS


     (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE


     DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB


     AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR


     SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE


     SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.  FOR LARGE


     ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE


     APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON


     REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.


 


RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES


 


CA060: NO DATA IS AVAILABLE.  THE ALTERNATE OFFEROR IS


     REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE


     INCLUDING DATA FOR THE APPROVED AND ALTERNATE


     PART FOR EVALUATION.


 


CS187: CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE


     USED NOR INCORPORATED IN ANY ITEMS TO BE


     DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION


     SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT


     DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.


     SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR


     APPROVAL UNLESS THEY ARE AUTHORIZED BY THE


     SPECIFICATION REQUIREMENTS.


 


 


CRITICAL APPLICATION ITEM


 


     MERITOR HEAVY VEHICLE SYSTEMS LLC 78500 P/N R955336


 


 


     PREP FOR DELIVERY


 


     LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS


 


     PKGING DATA-QUP:001


 


     SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS


     MATERIALS PACKAGING REQUIREMENTS.


 


     PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS


     SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,


     TITLE 49 CODE OF FEDERAL REGULATIONS,


     INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)


     TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4


     OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME


     DANGEROUS GOODS CODE (IMDG).  BOTH ICAO AND IMDG


     COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS


     ON TRANSPORT OF DANGEROUS GOODS.  WHEN A);


     CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES


     SHIPMENT THROUGH A MILITARY AERIAL PORT FOR


     TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL


     COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS


     MATERIALS FOR MILITARY AIR SHIPMENT.


 


     LABELING AND MARKING: ALL INTERIOR AND EXTERIOR


     CONTAINERS SHALL BE LABELED AND MARKED AS


     SPECIFIED IN THE REFERENCED PRODUCT


     SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D


     OF THE CONTRACT OR ORDER.  IN ADDITION, ALL


     LABELING AND MARKING SHALL COMPLY WITH THE


     REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,


     AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,


     IMDG ANNEX 1, AND/OR DLAI 4145.3.


 


     CERTIFICATION: ALL PACKAGING PERFORMANCE TEST


     REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES


     AND REPORTS ATTESTING TO DATE OF TESTING AND


     DATA RESULTS OBTAINED FROM TESTING.  THE


     CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE


     CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,


     ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,


     SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL


     INSPECTION AND RECEIVING REPORT), OR ANY


     SUITABLE ALTERNATE COMMERCIAL PACKING LIST.  ALL


     CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR


     INSPECTION BY AUTHORIZED U. S. GOVERNMENT


     REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3


     YEARS FROM THE DATE OF SHIPMENT.


 


     IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,


     IN ACCORDANCE WITH FED-STD-313, THE MATERIAL


     SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE


     WITH "ASTM D3951."


 


ZD017: In addition to MIL-STD-129 markings, each MRAP palletized shipment shall


     include two, 10 inch by 10 inch fluorescent yellow sticker/sign/placard


     with the letters MRAP in 2 inch bold black letters and applied to one


     side and one panel of palletized load. For better visibility, place the


     MRAP sticker/sign/placard on the outside of the multiwall container(s)


     or the pallet, not under any shrink-wrap. The stickers are to be placed


     high on each side of each container, so they are visible at eye level.


     This sticker/sign/placard is required to expedite the receipt and


     inspection of these shipments. This requirement is only applicable for


     shipments directed to DDC depots and direct vendor deliveries to CCPs;


     and does not apply to direct vendor deliveries to the customer.


 


     ACCEPTABLE DEVIATIONS: Contractor is authorized to make adjustments to


     actual sticker size and font size when shipping containers are not large


     enough to adequately display all required MIL-STD-129 markings along


     with the standard size (as cited above).


 


     OEM MRAP STICKERS: Each OEM has a designated background color in lieu of


     the standard yellow background MRAP sticker in an effort to apply Lean


     Six Sigma principles and concepts to packaging, storage, and transport


     of MRAP material to theater. The following are the official designations


     (background color # text required):


 


     GREEN # MRAP BAE (TX)


     TEAL # MRAP OSHKOSH


     PURPLE # MRAP BAE (PA)


     ORANGE # MRAP FPII


     BLUE # MRAP NAVISTAR


     PINK # MRAP GDLS


 


     NOTE: If MRAP stickers are missing or OEM is exhausting yellow


     background stickers, no quality notification shall be submitted to


     Contract Administrating Activity.


 


 


PACKAGING TEXT


 


THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:


Markings Paragraph


     When ASTM D3951, Commercial Packaging is specified, the following apply:


     •All Section "D" Packaging and Marking Clauses take precedence over


     ASTM D3951.


     •In addition to requirements in MIL-STD-129, when Commercial Packaging


      is used, the Method of Preservation for all MIL-STD-129 marking and


      labeling shall be "CP" Commercial Pack.


     •The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified


      in the contract take precedence over QUP in ASTM D3951.


 


IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS


 


Responses to this Request for Information (RFI) are not considered offers and cannot be accepted by the Government to form a binding contract. This RFI is for market research purposes only. Any information submitted is at the company's own expense. The Government will not reimburse respondents for any costs associated with submission of capability statements in connection with the market survey. Any information provided is voluntary.


Scott D. Knowles, Phone 6146920639, Fax 6146931558, Email scott.knowles@dla.mil

    1. Home
    2. Articles
    3. Login or Register

    4. Search

    5. Add/Announce your RFP